Because this repository contains submodules, you will have to clone it by running:
git clone --recursive https://github.com/wmpg/WesternMeteorPyLib.git
Running a normal git clone will not work.
A library of common functions used for meteor physics, developed by the Western Meteor Physics Group.
List of features:
- I/O functions for common formats of meteor data
- Trajectory estimation methods
- Gural at al. (2012) Multi-parameter fit method with PSO
- Monte Carlo method
- Orbit computation
- Meteor shower/trajectory simulaton
- Obtaining atmosphere densities using the NRLMSISE-00 model
- D criteria functions
- Parent body search
- Coordinate system transforms
- Solar longitude calculation (forward and inverse)
- Orbit visualizations
- Python 2 and 3 compatible
The two sections below describe how to install the library on both Linux and Windows.
These are installation instructions for Linux, assuming you have Anaconda installed. You might want to install this in a separate virtual environment in Anaconda. I recommend creating a separate environment called wmpl
for this code:
conda create -y --name wmpl python=3.8
Every time you run the code, you will have to activate the environment by typing:
conda activate wmpl
on some systems this may not work, so you will have to write source activate wmpl
instead.
We will now install all needed libraries. With the environment activated as described above, run this in the terminal:
conda install -y -c conda-forge numpy scipy matplotlib cython pytz pyqt
conda install -y -c conda-forge jplephem ephem
conda install -y -c conda-forge basemap basemap-data-hires
Next, navigate to a folder where you will be keeping the code, e.g. ~/source/
. Create this folder if it doesn't exist.
Then clone this repository:
git clone --recursive https://github.com/wmpg/WesternMeteorPyLib.git
After cloning/downloading this library, navigate into it with a terminal and run:
python setup.py install
this step might take a while because it will download the DE430 ephemerids.
Note that every time after closing the terminal or Anaconda prompt window, you will have to activate the wmpl
enviroment by:
conda activate wmpl
If you experience any issues, please see the "Troubleshooting" section below.
The installation might differ on Windows. I recommend installing Anaconda, which should install most of the packages you will need. Contact me for more details about Windows installation if you are stuck.
-
Install Anaconda Python 3.*, IMPORTANT: during the installation, make sure to select the following:
a) Check the checkbox which tells you to add anaconda path to system path: "Add Anaconda to my PATH envorinment variable."
b) Install only for "me" (single user)
-
Open the Anaconda powershell and run:
conda update anaconda conda create -y --name wmpl python=3.8 conda activate wmpl conda install -y -c conda-forge numpy scipy matplotlib cython pytz pyqt conda install -y -c conda-forge jplephem ephem conda install -y -c conda-forge basemap basemap-data-hires
-
Download and install git: https://git-scm.com/downloads
-
Open git bash, navigate to where you want to pull the code and run:
git clone --recursive https://github.com/wmpg/WesternMeteorPyLib.git
-
From the Anaconda powershell prompt navigate to the the cloned WesternMeteorPyLib directory and inside run:
python setup.py install
Note that every time after closing the terminal or Anaconda prompt window, you will have to activate the wmpl
enviroment by:
conda activate wmpl
If you experience any issues, please see the "Troubleshooting" section below.
If you are getting the following error on Windows: Unable to find vcvarsall.bat
, that means you need to install Visual C++ Build Tools 2015.
If you are getting this error when running the setup: ModuleNotFoundError: No module named 'wmpl.PythonNRLMSISE00.nrlmsise_00_header'
, it means that you haven't cloned the repository as per instructions. Please read this README file more carefully (hint: the answer is at the top of the file).
The basemap conda package is terribly broken and no one seems to care to fix it, so we have to do a little bit of "hacking". First, find where your anaconda is installed.
Under Windows, it is probably in C:\Users\<YOUR_USERNAME>\AppData\Local\Continuum\anaconda3\
or C:\Users\<YOUR_USERNAME>\Anaconda3\
, where you should replace <YOUR_USERNAME> with your username (duh!). From now on I will refer to this path as <ANACONDA_DIR>
.
Open the following file in a text editor: <ANACONDA_DIR>\envs\wmpl\Lib\site-packages\mpl_toolkits\basemap\__init__.py
.
Under Linux, it is probably in /home/<YOUR_USERNAME>/anaconda3
. From now on I will refer to this path as <ANACONDA_DIR>
. Open the following file in a text editor: <ANACONDA_DIR>/envs/wmpl/lib/python3.7/site-packages/mpl_toolkits/basemap/__init__.py
.
Find the line pyproj_datadir = os.environ['PROJ_LIB']
, and comment it out by putting a # in front of it. Right below that command, add the following line(for Windows):
pyproj_datadir = "<ANACONDA_DIR>/envs/wmpl/Library/share"
(for Linux):
pyproj_datadir = "<ANACONDA_DIR>/envs/wmpl/share/basemap"
Just make sure to replace <ANACONDA_DIR> with the full path. Also, make sure to replace all backslashes \
with forward slashes /
in the path.
Save the file. Enjoy.
If after this you get this error:
FileNotFoundError: [Errno 2] No such file or directory: '<ANACONDA_DIR>/envs/wmpl/Library/share\\epsg'
then you have to manually download the epsg
file (LINK, choose "Save as...", remove the ".txt" extension if necessary) into the <ANACONDA_DIR>/envs/wmpl/Library/share
directory. Please don't hesitate to contact us if you have trouble getting this to work, as we share the same frustrations with the basemap
library and the lack of any real alternative.
In the recent matplotlib versions, the maintainters really droped the ball and started shipping buggy versions. Fortunately, we can revert to an old matplotlib version to fix this:
conda install -c conda-forge matplotlib=3.1.2
conda upgrade matplotlib
If it's still not working, try this:
conda install -c conda-forge matplotlib=2.2.4
Run:
pip install PyQt5
JPL DE430 ephemerids are not a part of the library, but they will be downloaded automatically on install. The file can be downloaded separately and put into the shared
directory:
If you want to use the most recent lists of comets and asteroids, download these as well, or run the UpdateOrbitFiles.py
script:
Module interfaces are not 100% complete yet, but individual functions are well documented. To run individual modules, e.g. to demonstrate how the trajectory solver works, run:
python -m wmpl.Trajectory.Trajectory
or, you can use functions from the library in other scripts. E.g. if you want to run a particular function from the library, you can create a new .py file and do:
import datetime
import math
# Import modules from WMPL
import wmpl.Utils.TrajConversions as trajconv
import wmpl.Utils.SolarLongitude as sollon
# Compute the Julian date of the current time
jd_now = trajconv.datetime2JD(datetime.datetime.now())
# Get the solar longitude of the current time (in radians)
lasun = sollon.jd2SolLonJPL(jd_now)
print(math.degrees(lasun), ' deg')
For academic use, please cite the paper: