/am-amp2400

Primary LanguageC++GNU General Public License v3.0GPL-3.0

AM Amp 2400 Controller

Requirements: None
Limitations: None

AM Amp 2400 Controller GUI

Controls the AM Amp 2400 amplifier by scaling the gains on the analog input/output channels and sending a mode telegraph to set the amplifier mode (custom).

Also enables scaling of custom AO offsets based on the gains of the selected amplifier mode.

Input

  1. input(0) - I=0 Input from AI : Empty signal from analog input for 'calibrating' the input channel for I=0.
  2. input(1) - I=0 Input from AO : Empty signal from analog output for 'calibrating' the output channel for I=0.

Output

  1. output(0) - Mode Bit 1 : Bit 1 of signal sent to amplfier
  2. output(1) - Mode Bit 2 : Bit 2 of signal sent to amplfier
  3. output(2) - Mode Bit 4 : Bit 4 of signal sent to amplfier

Parameters

  1. Input Channel - Input channel to scale (#)
  2. Output Channel - Output channel to scale (#)
  3. Amplifier Mode - Mode to telegraph to amplifier
  4. Probe Gain - Gain - HIGH (10 MOhm) or LOW (10 GOhm)
  5. AI Offset - Offset the amplifier scaling (entered manually or computed based on current amplifier mode)
  6. AO Offset - Offset the amplifier scaling (entered manually or computed based on current amplifier mode)

States