pim-vhdl

Why

Because VHDL is hard and should be free.

Library organization

+── hdl                 <- Re-usable and reused vhdl
|   |
|   +── bhv             <- Simulation hdl, like clock, reset, ...
|   \── rtl             <- Synthetizable hdl
|
+── board
|   \── mimas           <- One directory for each board
|       +── ucf         <- Hardwired ucf, like leds, buttons, ...
|       |
|       +── projects
|       \── hello_leds  <- one directory for each project
|           +── ucf     <- part of the ucf that change with project
|           +── hdl     <- code
|           +── tb      <- testbench
|           \── tmp     <- build tool crap
|
+── tb
|   \── fifo <- one directory for each tb, and at least one tb per hdl entity.
|       +── 00_reset    <- tb for the reset(s)
|       |   +── hdl     <- here goest the 'tb' entity
|       |   \── tmp
|       +── 01_simple
|       \── 02_flags
|
\── travis          <- Travis CI scripts

CodingStyle

Indentation

tabs size 4

Active state

Signals are generally active high, including the reset. Active-low signals can be used when they are directly connected to the hardware.

Test benches

Test benches are required for all rtl entities.
Test benches results must be checked using assert
Successful test benches assert the message PIM_VHDL_SIMULATION_DONE with the severity note.
Expected asserts with severity warning should be announced by using an assert starting with PIM_VHDL_SIMULATION_DONE.

Synchronous entities

All synchronous entities MUST have at least those signals:

The clock signal is named clock.
The asynchronous reset signal is named reset.

Reset

Synchronous entities are expected to behave the same when there is no reset, or when there is an asynchronous reset.

Hardware requiring synchronous reset will use a script for converting asynchronous reset to synchronous. This script will be written when there is some need for it, and will do something like:

--- async.vhd
+++ sync.vhd
@@ -1,8 +1,9 @@
-process(reset, clock)
+process(clock)
 begin
-	if reset = '1' then
-		some_signal <= '0';
-	elsif rising_edge(clock) then
+	if rising_edge(clock) then
 		some_signal <= not some_signal;
+		if reset = '1' then
+			some_signal <= '0';
+		end if;
 	end if;
 end process;

Testing

For windows users: install cygwin with at least git, wget and unzip.
Install ghdl and add it to your PATH or let the scripts get it for you.

Manual testing

Testing one test bench

source bin/env.sh
cd tb/ad7476
sim.sh

Expected result: ../../hdl/bhv/clock/clock_stop.vhd:52:8:@100875ns:(assertion note): PIM_VHDL_SIMULATION_DONE

Testing all the test benches

source bin/env.sh
cd tb
all.sh

Expected result:

Running all 'tb' from tb directory
./ad7476/00_reset                  : success
./fifo/00_reset                    : success
./fifo/01_reset_preread            : success
./fifo/02_flags                    : success
./ft245_sync_if/00_reset           : success
./ft245_sync_if/01_xfer            : success
./packetizer/00_reset              : success
./project/adc2ftd_02/00_reset      : success
./width_changer/00_reset           : success
./width_changer/01_bigger          : success
./width_changer/02_smaller         : success

Running all 'managed_tb' from tb directory without reset
./ad7476/01_simple                 : success
./fifo/03_simple                   : success
./fifo/04_preread                  : success
./ft245_sync_if/02_pingpong        : success
./ft245_sync_if/03_counter_to_host : success
./packetizer/01_simple             : success
./project/adc2ftd_02/01_full       : success
./width_changer/03_full            : success

Running all 'managed_tb' from tb directory with asynchronous reset
./ad7476/01_simple                 : success
./fifo/03_simple                   : success
./fifo/04_preread                  : success
./ft245_sync_if/02_pingpong        : success
./ft245_sync_if/03_counter_to_host : success
./packetizer/01_simple             : success
./project/adc2ftd_02/01_full       : success
./width_changer/03_full            : success

Automated testing

All test benches are run on Travis CI, at each commit. The status of the latest run is shown after the title of this page.

Code

Code for the host side of FTDI FT245 synchronous fifo is available at ft2tcp and ft2stdio

RandomReaper/pim-vhdl