RandyAguil

RandyAguil's Stars

• earlephilhower/arduino-pico

  Raspberry Pi Pico Arduino core, for all RP2040 and RP2350 boards

  Language:C2k421

• MarlinFirmware/Marlin

  Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

  Language:C++16.2k19.2k

• SteveJWallace/sapphire-s

  This project aims to create a Cura profile for the TwoTrees Sapphire S 3d printer.

  8

• HefnySco/OBAL

  Open Board Architecture for Linux

  Language:Python5818

• atc1441/ATC_stc_solder_iron

  Custom firmware for cheap STC Based Soldering iron using PlatformIO and SDCC 8051 based

  Language:C463

• sipeed/Maixduino

  Arduino port on Maix board ( k210 )

  Language:C++21695

• berred16/555-PWM-generator

  Circuit and Layout for a grid-style PCB

  2

• mirkix/ardupilotblue

  Howto use BeagleBone Blue with ArduPilot

  15156

• VoronDesign/Voron-Trident

  Voron Trident CoreXY 3D Printer design

  617182

• PrintersForAnts/Salad_Fork

  17434

• orbisrc/Orbis-Air

  DIY RC Transmitter

  255

• Lester3DGadgets/Cura

  3D printer / slicing GUI built on top of the Uranium framework

  Language:Python1

• slebetman/simpleTX

  Simple open RC transmitter

  Language:C3

• marijnfs/RISC-V-Longan-Nano-Examples

  Mandelbrot and Cellular Automata for Longan Nano (GD32VF) RISC-V

  Language:C132

• adafruit/Adafruit-Feather-M0-RFM-LoRa-PCB

  PCB files for the Adafruit Feather M0 RFM69 / RFM9X LoRa

  159

• buk7456/Arduino-LoRa-RC-transmitter-and-reciever

  Control just about anything RC

  Language:C++6021

• ExpressLRS/ExpressLRS

  ESP32/ESP8285-based High-Performance Radio Link for RC applications

  Language:C++3.6k921

• kkbin505/Arduino-Transmitter-for-ELRS

  Arduino based RC transmitter for ELRS external TX Module

  Language:C++19844

• simonmonk/raspberrypi_cookbook_ed4

  Code to accompany the book Raspberry Pi Cookbook fourth edition

  Language:Python488

• simonmonk/prog_pico_ed1

  Code examples for my book 'Programming the Raspberry Pi Pico'.

  Language:Python266

• sbcshop/PiSquare

  PiSquare is an RP2040 and ESP-12E-based board that allows you to use multiple Raspberry Pi HATs without stacking them on top of one other. PiSquare uses Socket programming to wirelessly communicate multiple Raspberry Pi HATs ("n" numbers of HATs).

  Language:Python265

• bigtreetech/Manta-M5P

  578

• KRALYN/PositronV3

  A upside-down, fast, portable, and compact 3D printer

  2.1k233

• prusa3d/PrusaSlicer

  G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)

  Language:C++7.7k1.9k

• bigtreetech/BIQU-Hurakan

  2111

• deividAlfa/stm32_soldering_iron_controller

  Custom firmware for Quicko and KSGER T12 soldering stations

  Language:C43186

• fluidd-core/FluiddPI

  FluiddPi - A Pi image with Klipper, Moonraker, Fluidd and Web Camera support pre-installed.

  Language:Shell30059

• makerbase-mks/MKS-PI

  As we all know, the Klipper firmware has the advantages of high printing speed, high precision, and the ability to use the web page to control the printer, etc. MKS PI is a high-end microcomputer board designed by makerbase to replace the Raspberry Pi for the convenience of 3D printing users to use the Klipper firmware. In terms of hardware, MKS PI has a powerful 4-core 64-bit SOC onboard, with 1GBytes of DDR3 memory, supports HDMI screen interface and PI-TS35 screen interface, provides Ethernet port, 3-channel USB interfaces (can be connected to a 3D printer main board, USB Wireless network card, USB camera, U disk, USB keyboard and mouse, etc.); In terms of software, Makerbase provides a complete Klipper firmware transplanted based on the Armbian desktop system, and directly supports klipperScreen. Users only need to download the image file provided by Makerbase, burn it to the TF card, without a lot of construction work, use the usb port or serial port to connect your main board, configure the parameters on the webpage, and you can use the Klipper firmware happily!

  1128

• chiluk/sapphireplus

  Here are configs for making the Sapphire Plus v1.1 work with klipper.

  3

• bigtreetech/BIGTREETECH-SKR-V1.3

  32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required

  Language:C++1k1.1k