Manta M8P V2.0
Closed this issue · 25 comments
Is your feature request related to a problem? Please describe
No option for Manta M8P V2.0
Describe the solution you'd like
Can this be added to the config of the RatOS?
Describe alternatives you've considered
No response
Additional information
No response
Is your feature request related to a problem? Please describe
No option for Manta M8P V2.0
Describe the solution you'd like
Can this be added to the config of the RatOS?
Describe alternatives you've considered
No response
Additional information
No response
I'm using this board already see https://github.com/sergelhr/RatOS-configuration
This is implemented in the development branch and will be published with 2.1
Sorry, if possible know when version 2.1 will be implemented ?
I need to printing whith my new RatRig, the only printer that i have after death of my creality :(
Otherwise can i do to configure Klipper standard with correct profile for VCore3.1 500 using Manta M8P v2.0 & CB1 without using RatOS ?
I will preferred RatOS and all features but Standard Klipper can be ...
please, help me. Many Thanks !!
@LivioB74 Unfortunately i can't give a specific date at this point, but we're getting close to public beta. There are some major features being developed and tested right now that need to be completed first.
That said, if you can live with the update manager reporting "dirty" in the mainsail machine tab, you can just simply install RatOS 2.0, update all packages, then dump this folder into /home/pi/printer_data/config/RatOS/boards. Then ssh into the pi and run the ratos update script:
ssh pi@ratos.local
sudo ./printer_data/config/RatOS/scripts/ratos-update.shAnd then go to the configurator to flash your Manta M8P v2.0. To use the board in printer.cfg, comment out the existing boards and add [include RatOS/boards/btt-manta-m8p-20/config.cfg]. Now your Manta M8P v2 works in RatOS v2.0. You just won't be able to update RatOS without resetting it and then you'd have to drop it back in again.
You'll have to download the wiring diagram/fan wiring diagram and open them locally to view the images.
HI @miklschmidt !
Many Many Thanks !!!
Now i will try ... This way is the same that i try to do except for ratos-update ... and re flash manta ...
Good Work ! And thanks again ... I'm curious to know new features :-)
HI
To confirm if my steps are correct:
- Write img RatOS 2.02 on sdcard
- Edit file system.cfg,ratos-wpa-supplicant, boardenv.txt on sd card
- insert SDcard into CB1 and stard printer
- ssh pi@ratos.local
- sudo apt update && upgrade -y
- scp -r \btt-manta-m8p-20 pi@ratos:/home/pi/printer_data/config/RatOS/boards
- sudo ./printer_data/config/RatOS/scripts/ratos-update.sh
- http://ratos.local
- compile firmware (script start shell in Console that compile all fw, right ?)
- install VCORE THREE CONFIG macro button from Installation menu
and it's all ...
but no succes ... not connecting ....
some hints ?
Not quite how it goes. You know we have documentation for the setup process right? Just follow that. Before you go to boards (so after configuring wifi) update everything through mainsail/moonraker ( i'm not talking about the system packages), dump the folder in and run the ratos-update.sh script. Then proceed with the guide at /configure, and everything should be the same - except you have to add the board include to printer.cfg yourself at the end.
OK ! I restart ... Thanks !
Sorry again, i have probally a little confusion ...
- under RatOS/config/boards i must create folder "btt-manta-m8p-20" ?
- after i must dump (content from you "this folder" (https://github.com/Rat-OS/RatOS-configuration/tree/v2.x/boards/btt-manta-m8p) into boards or into btt-manta-m8p-20 ?
Please, must have patience ... i'm a donk :(
But in any case RatOS configurator give me this error : Error
Invalid board definition(s) in /home/pi/printer_data/config/RatOS/boards.
I find this procedure too easy foe me and i fault or too difficult and i fault again ... i dont understand where and whi ... or probally i make something wrong ...
so i try again and again ...
@LivioB74 No, that's the manta m8p v1 from the v2.x branch. You want this folder https://github.com/Rat-OS/RatOS-configuration/tree/development/boards/btt-manta-m8p-20
It's the same repository but a different branch, you're just replicating the files for that board in your local v2.x copy of the repository. Same folder name, same file contents.
It's complaining because you duplicated a board config (the manta m8p v1).
Hi,
Do you have any update when the release of 2.1 will be?
@IridianZore it will coincide with the release of the V-Core 4 :)
I copied the files on the above link to the boards file of the OS.
Then I started RatOS Setup Wizard.
Unfortunately I always get the same error.
Invalid board definition(s) in /home/pi/printer_data/config/RatOS/boards.
Can you help me get my manta m8p v2 with cb1 working.
Is your feature request related to a problem? Please describe
No option for Manta M8P V2.0
Describe the solution you'd like
Can this be added to the config of the RatOS?
Describe alternatives you've considered
No response
Additional information
No response
I'm using this board already see https://github.com/sergelhr/RatOS-configuration
Can you give me a workflow how to handle it.
I'm a newbe and don't have this deep knowledge....
I copied the files on the above link to the boards file of the OS. Then I started RatOS Setup Wizard. Unfortunately I always get the same error. Invalid board definition(s) in /home/pi/printer_data/config/RatOS/boards.
Can you help me get my manta m8p v2 with cb1 working.
Ah yes, i forgot serialPath is removed in 2.1.
try adding "serialPath": "/dev/btt-manta-m8p-20", after the first line (with the opening {) to boards/btt-manta-m8p-20/board-definition.json
you mean as below mention?
"dfu": {
"serialPath": "/dev/btt-manta-m8p-20"
"flashDevice": "0483:df11",
"dfuBootImage": "dfubooting.png",
"instructions": [
"Make sure the board is powered on",
"Press and hold the BOOT 0 button on the board.",
"Press and release the RESET button on the board.",
"Release the BOOT 0 button."
],
"hasBoot0Jumper": false
},
you mean as below mention? "dfu": { "serialPath": "/dev/btt-manta-m8p-20" "flashDevice": "0483:df11", "dfuBootImage": "dfubooting.png", "instructions": [ "Make sure the board is powered on", "Press and hold the BOOT 0 button on the board.", "Press and release the RESET button on the board.", "Release the BOOT 0 button." ], "hasBoot0Jumper": false },
No, and if that's the entire contents of your board-definition.json then you didn't copy the files or you edited and deleted some of the board definition file. It should be inserted here below this line in the file.
I just picked out the part with the entry.
This is the complet fil
board-definition.json
I just picked out the part with the entry. This is the complet fil board-definition.json
Gotcha. Anyway, it should not go under "dfu", it needs to be at the top level, it also needs a comma at the end. This is what you want:
{
"$schema": "../board-definition.schema.json",
"serialPath": "/dev/btt-manta-m8p-20",
"name": "Manta M8P v2.0",
"manufacturer": "BIGTREETECH",
"id": "btt-manta-m8p-20",
"firmwareBinaryName": "firmware-btt-manta-m8p-20.bin",
"compileScript": "compile.sh",
"flashScript": "flash.sh",
"documentationLink": "https://os.ratrig.com/docs/boards/btt/manta-m8p-11",
"fourPinFanConnectorCount": 2,
"driverCount": 8,
"driverVoltages": [24, 36, 48, 56],
"dfu": {
"flashDevice": "0483:df11",
"dfuBootImage": "dfubooting.png",
"instructions": [
"Make sure the board is powered on",
"Press and hold the BOOT 0 button on the board.",
"Press and release the RESET button on the board.",
"Release the BOOT 0 button."
],
"hasBoot0Jumper": false
},
"motorSlots": {
"MOTOR1": {
"title": "MOTOR 1",
"enable_pin": "PC14",
"step_pin": "PE6",
"dir_pin": "PE5",
"uart_pin": "PC13",
"cs_pin": "PC13",
"diag_pin": "PF4",
"endstop_pin": "PF4",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
},
"MOTOR2": {
"title": "MOTOR 2",
"enable_pin": "PE4",
"step_pin": "PE2",
"dir_pin": "PE1",
"uart_pin": "PE3",
"cs_pin": "PE3",
"diag_pin": "PF3",
"endstop_pin": "PF3",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
},
"MOTOR3": {
"title": "MOTOR 3",
"enable_pin": "PE0",
"step_pin": "PB8",
"dir_pin": "PB7",
"uart_pin": "PB9",
"cs_pin": "PB9",
"diag_pin": "PF2",
"endstop_pin": "PF2",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
},
"MOTOR4": {
"title": "MOTOR 4",
"enable_pin": "PB6",
"step_pin": "PB4",
"dir_pin": "PB3",
"uart_pin": "PB5",
"cs_pin": "PB5",
"diag_pin": "PF1",
"endstop_pin": "PF1",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
},
"MOTOR5": {
"title": "MOTOR 5",
"enable_pin": "PG15",
"step_pin": "PG13",
"dir_pin": "PG12",
"uart_pin": "PG14",
"cs_pin": "PG14",
"diag_pin": "PF0",
"endstop_pin": "PF0",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
},
"MOTOR6": {
"title": "MOTOR 6",
"enable_pin": "PG11",
"step_pin": "PG9",
"dir_pin": "PD7",
"uart_pin": "PG10",
"cs_pin": "PG10",
"diag_pin": "PC15",
"endstop_pin": "PC15",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
},
"MOTOR7": {
"title": "MOTOR 7",
"enable_pin": "PD6",
"step_pin": "PD4",
"dir_pin": "PD3",
"uart_pin": "PD5",
"cs_pin": "PD5",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
},
"MOTOR8": {
"title": "MOTOR 8",
"enable_pin": "PD2",
"step_pin": "PC7",
"dir_pin": "PC8",
"uart_pin": "PC6",
"cs_pin": "PC6",
"spi_software_mosi_pin": "PC12",
"spi_software_miso_pin": "PC11",
"spi_software_sclk_pin": "PC10"
}
},
"ADXL345SPI": {
"cs_pin": "PB12",
"software": {
"sclk": "PC10",
"mosi": "PC12",
"miso": "PC11"
}
},
"stepperSPI": {
"software": {
"sclk": "PC10",
"mosi": "PC12",
"miso": "PC11"
}
}
}YES! ;) It worked! Great job! Thank you so much!
I followed this as mentioned above. I am able to click on the M8P v2 board and it goes to the next page. It gives me 2 options for flashing, DFU or Manual SD. When I click on the button for DFU or Manual flash, the button itself quickly flashes and does nothing. Is there anything I can do to make this feature work?
Hello did you try to flash the bootloader ?
https://github.com/bigtreetech/Manta-M8P/tree/master/V2.0/Firmware
v2.1.0-RC1 has been released with native support.
v2.1.0-RC1 has been released with native support.
Thanks and awesome work on 2.1. Installed it and fixed this issue among other issues. Thanks.