Rat-OS/RatOS

Issues

• Implement option to reset config

  #161 opened 3 months ago by evilC
  0

• "Motor slot conflicts detected" when switching from CoreXY to Hybrid

  #160 opened 3 months ago by evilC
  1

• Switching from Hybrid to CoreXY removes fan settings, even if "Reuse configuration" is selected

  #159 opened 3 months ago by evilC
  0

• `pin: !fan_part_cooling_pin` method for stopping fan spinning at 100% on boot does not seem to work with my setup

  #157 opened 3 months ago by evilC
  2

• Use regex to extract pinned commits from moonraker.conf and reset repo's to the correct commit hashes during build in respective modules.

  #156 opened 4 months ago by miklschmidt
  1

• Support BTT CB2

  #126 opened 8 months ago by vzagranichnyy
  5

• SSID password stored in clear text in ratos-wpa-supplicant.txt

  #152 opened 4 months ago by smwoodward-alpha
  4

• SKR 1.4 unable to finish initial setup

  #154 opened 4 months ago by m4gn3to
  1

• Bed Crashes when at 500mm

  #151 opened 6 months ago by malcinator
  3

• [Partially fixed] Wrong permissions for Klipper virtual env

  #134 opened 7 months ago by Frix-x
  9

• RTD PT1000 through MAX31865

  #140 opened 5 months ago by konasimakopoulos
  1

• Nozzle Drag on Rat Rig Logo

  #141 opened 6 months ago by dvaldes409
  8

• SSID password stored in clear text in ratos-wpa-supplicant.txt

  #149 opened 6 months ago by smwoodward-alpha
  0

• SSID password stored in clear text in ratos-wpa-supplicant.txt

  #150 opened 6 months ago by smwoodward-alpha
  0

• SSID password stored in clear text in ratos-wpa-supplicant.txt

  #145 opened 6 months ago by smwoodward-alpha
  0

• SSID password stored in clear text in ratos-wpa-supplicant.txt

  #146 opened 6 months ago by smwoodward-alpha
  0

• SSID password stored in clear text in ratos-wpa-supplicant.txt

  #147 opened 6 months ago by smwoodward-alpha
  0

• SSID password stored in clear text in ratos-wpa-supplicant.txt

  #148 opened 6 months ago by smwoodward-alpha
  0

• SSID password stored in clear text in ratos-wpa-supplicant.txt

  #144 opened 6 months ago by smwoodward-alpha
  0

• SSID password stored in clear text in ratos-wpa-supplicant.txt

  #142 opened 6 months ago by smwoodward-alpha
  0

• SSID password stored in clear text in ratos-wpa-supplicant.txt

  #143 opened 6 months ago by smwoodward-alpha
  0

• Built in filament unload causing clogs

  #138 opened 7 months ago by smwoodward-beep
  9

• ratos.cfg needs to be read only for user space or allow for user consent for a writable file

  #135 opened 7 months ago by smwoodward
  17

• Move the [mcu] serial line creation into printer.cfg and not in ratos.cfg from RatOS-Configurator

  #137 opened 7 months ago by smwoodward-beep
  0

• Pull Up resistor

  #136 opened 7 months ago by T-jakel
  1

• Support for OrangePi cm4 in Ratos 2.1

  #132 opened 7 months ago by cross81
  11

• Support for Manta M8P v2.0

  #105 opened 7 months ago by riksarchen
  5

• Active Wifi Lookup during Hotspot mode

  #111 opened 7 months ago by manueldrama
  1

• LDO Orbiter V2.0 - Configs deviate from OEM suggestions

  #109 opened 7 months ago by swilkens
  5

• Prime blob or prime line can exceed maximum extrusion (esp. with small nozzles)

  #113 opened 7 months ago by david-antos
  3

• Add Rapido 2 Config

  #116 opened 7 months ago by SirFarquaad
  1

• Unable quad_gantry_level on prusa configs

  #133 opened 7 months ago by polloperrocampero
  1

• PSA: RatOS already has Beacon installed and will flash it automatically, don't install it again.

  #127 opened 8 months ago by miklschmidt
  0

• Installing RatOS 2.1 on Prusa MK3S: no way to flash Einsy board

  #131 opened 7 months ago by david-antos
  4

• Rear right steppers do not move on hybrid config while X axis movement

  #130 opened 7 months ago by macke4ever
  2

• RatOS 2.1-RC1 - SKR Pro V1.2 Wrong Pin Assignment in RatOS.cfg

  #128 opened 7 months ago by MintyTrebor
  5

• PSA: accel_to_decel will change to minimum_cruise_ratio

  #121 opened 8 months ago by miklschmidt
  0

• Pi 5 Support

  #124 opened 8 months ago by ddellant
  1

• FR: allow system user to be specified

  #125 opened 9 months ago by jamincollins
  1

• Add support for raspberry pi 5

  #118 opened 10 months ago by puntodecontrol
  1

• Octopus max support

  #120 opened 10 months ago by mkljax
  6

• Octopus Max EZ users headsup!

  #110 opened a year ago by miklschmidt
  0

• START_PRINT macro doesn't start Primeblob with Beacon RevH installed

  #115 opened a year ago by BBbusta
  0

• Octopus Pro H723 v1.1 will not compile

  #103 opened a year ago by LongLiveCHIEF
  2

• update error with klipper(v0.11.0-219 > v0.12.0-40) and moonraker (v0.8.0-48 > v0.8.0-231)

  #114 opened a year ago by DarkRabbit19
  2

• ratos cb1, install Happy Hare (ercf manager tool) issue

  #112 opened a year ago by Wolffy00
  1

• _START_PRINT_AFTER_HEATING_BED cools to preheat_extruder_temp

  #107 opened a year ago by SirUli
  1

• Websocket infinite reconnection on desktop web browsers, when accessing to an iPhone it works

  #106 opened a year ago by SpaghettiC0des
  4

• Bug: Too small /tmp mounted

  #102 opened a year ago by Prutsium
  0

• Git version: 'v0.11.0-248-gd725dfd3-dirty' after RatOS 2.0.2 installation

  #100 opened a year ago by tigerwoodsDE
  1