Equipment:
- Raspberry Pi 4 (I think any version will work)
- A USB Soundcard (really cheap one. Mine was about £1)
- Baofeng UV-5R (Its a fantasic cheap radio!)
- Cables
- 2.5mm Male Jack to 3.5mm Female Stereo Headphone Earphone Audio Adapter
- 3.5mm Splitter Stereo Jack Plug Male to Female Y Cable Lead
- 2 x 3.5mm to 3.5mm
Connections:
-
Radio SP (2.5mm) port > 2.5mm to 3.5mm adapter > 3.5mm Cable to 3.5mm > Soundcard Microphone
-
Radio MIC (3.5mm) port > 3.5mm Y splitter - (LEFT) >3.5mm Cable to 3.5mm > Soundcard Speaker
I hope the above makes sence. Speaker on Radio goes to mic on PC. And the LEFT channel goes from the Soundcard to the Mic on the Radio.
install.sh - This will install all the software needed. Some software will need to be configured.
direwolf_config.md - direwolf configuration instructions.