Red Network Tool is a tool for network exploration and info finding over the internet. There is a config feature!
Current tool version consist of:
- Ifconfig.
- Port scan(comprehensive, TCP, SYN, ACK, UDP).
- Host discovery(scan for up devices on a local network).
- DNS checks with geolocation information.
- Banner grabbing.
- Ping(send ICMP packets to a host to check connectivity).
- Traceroute(diagnose route paths and measure transit delays).
- Reverse ip lookup.
- Censys.
- Site technologies detection feature.
- Honeypot probability.
- Mac address lookup.
- Dns mapping.
This program is supported in all operating system like Linux, Windows and MacOS. The Code is written in python3, so don't worry it works well without any bugs.
git clone https://github.com/Red-company/RedNetwork_Tool.git
cd RN_Tool
bash setup.sh
! After executing setup.sh, you'll need to edit newly created config.py
sudo python3 RedNetwork_Tool.pyIf you want to display your system's current TCP/IP network configuration, type the following command:
-ifconfig
Supported types:
- SYN (
-scansyn) - TCP (
-scantcp) - UDP (
-scanudp) - ACK (
-scanack) - Comprehensive scan (
-scan).
-scan -host [HOST(s)]
-scan -host [HOST(s)] -p [PORT(s)]
-scan -host [HOST(s)] -prange [START PORT] [END PORT]
-scan -iprange [START IP] [END IP] -p [PORT(s)]
-scan -iprange [START IP] [END IP] -prange [START PORT] [END PORT]
Perform scan to detect local devices.
-scanlocal
Similar to the well known nslookup command used on UNIX systems.
-ns [HOST(s)]
To perform banner grabbing, type one of the following commands:
-grab -host [HOST(s)] -p [PORT(s)]
-grab -iprange [START IP] [END IP] -prange [START PORT] [END PORT]
-grab -host [HOST(s)] -prange [START PORT] [END PORT]
-grab -iprange [START IP] [END IP] -p [PORT(s)]
Uses to send ICMP packets to a host to check connectivity, simply type:
-ping [HOST]
Uses to diagnose route paths and measure transit delays, use the following command:
-traceroute [HOST]
Uses to perform a reverse ip lookup, to perform write:
-reverseip [HOST]
Censys feature, just type:
-censys [HOST]
Uses to detect site's technologies. Type:
-techdetect [URL]
Uses to calculate probability of ip being honeypot. To calculate just type:
-honeypot [IP]
You can check information about certain mac address with it, type:
-macaddress [MAC]
Do you want to get a map of dns servers of certain organization? Okay, here it is:
-dnsmap [DOMAIN]
Subdomains, unfortunately, only by bruteforcing 10.000 most common ones.
-subdomains mail.ru
All material in this repository is in the public domain.