Issues
- 0
安装包内部分关键文件丢失或不匹配
#139 opened by Eco-del-sol - 2
硬件在环仿真CopterSim/3D Display无法正常显示飞行状态
#125 opened by JohnRen325 - 2
启动SITL时出现没有wsl子系统报错
#138 opened by yyyyyxq - 0
3DDisplay打开后电脑分辨率降低,软件界面也变花了,没办法使用
#137 opened by superLionel - 0
Fail in creating Win10WSL and Eclipse short cut after installing the software package
#136 opened by pathfinder72 - 0
错误: zip 文件 "E:\1.ToolChainZip\PX4Msys2Toolchain.zip" 无效。 错误: 编译器部署出错,安装中止怎么解决
#135 opened by Jasmineee1022 - 1
关于书中的例程问题
#134 opened by wangqing-W - 2
错误: PSP工具箱配置失败,请重试! 错误: PSP工具箱升级更新出错,安装中止
#106 opened by zhengzhiZJU - 3
Failed to detect Ubuntu version.
#128 opened by wenfubi - 2
- 0
请教下有知道《多旋翼无人机远程控制与实践》这本书实飞实验用的tello无人机换成pixhawk4飞控板行吗?
#133 opened by zylym - 0
请问一下可以建立平台可以进行吊挂负载的无人机进行仿真吗
#132 opened by rusions - 2
请问基础版包含了课本上的e0\1.SoftwareSimExps\CopterSim3DEnviroment.slx仿真环境等文件吗?为什么我下载的基础班的文件夹与课本内容描述的差这么多?
#131 opened by VincentXun - 1
请问讲座中的模型在哪里下载?就是那个基于Simulink的软件包
#121 opened by Yurain0 - 1
Impossible to download the RflySim Basic package
#129 opened by cbrose - 1
编译时出错,显示toolchain未注册
#127 opened by SheldonSEU - 1
错误: ZIP 文件 "F:\UAV training\全功能版\RflySimAdv3Full\2.FirmwareZip\PX4Firmware1.12.3.zip" 无效。 错误: PX4固件部署出错,安装中止
#130 opened by huade2022 - 1
Time_out error
#100 opened by pompy001 - 0
正常安装后附加功能管理器未显示PSP工具箱
#126 opened by junwu-d - 0
Qground disconnected.
#124 opened by arianamalena - 1
高级体验版的安装脚本在Ubuntu-18.04安装失败后无法继续安装
#123 opened by ZHLinn - 0
按下回车键运行一键安装脚本的时候,提示文件校验通过,但是又蹦出来一个警告对话框:
#122 opened by john-dickens - 0
matlab运行OnekeyScript失败
#120 opened by qweasdzcx123 - 0
- 0
- 0
编译例程e5.1,一直出现这个错误,请问怎么解决啊
#117 opened by lluav - 0
缺少课程跟踪控制器设计实验,路径跟随控制器设计实验对应的代码
#116 opened by dingning1 - 2
- 0
- 0
Lesson_01_Introduction.pdf
#113 opened by aegiloru - 0
- 0
软件安装错误
#111 opened by zhilantingjiang - 0
FlightGear-F450未响应
#110 opened by XATUCSJY - 0
- 0
高级体验版安装完之后,文件夹内没有UE4的快捷键,QGC里面也没有地图(白屏)
#108 opened by songliangang - 1
Bundle#218 start failed: Loading D:\Program Files\Polyspace\R2020a\bin\win64\builtins\simulinktest_core\mwsimharness_core_builtinimpl.dllfailed with error: 鎵句笉鍒版寚瀹 氱殑妯″潡銆�
#107 opened by ly0303521 - 0
通过Simulink将程序下载到pixhawk2.4.8准备实飞,但是连到地面站提示找不到内置的传感器
#105 opened by zondafeng - 1
下载固件出现这个问题
#96 opened by likuo21 - 0
"没有找到px4fmu-v5_default对应的cmake文件,固件编译与工具箱配置失败,请重试!"
#104 opened by finleygou - 1
正在解压Firmware压缩包,请耐心等待... 错误: ZIP 文件 "D:\APP\Rflysim\RflySimAdvFree\2.FirmwareZip\PX4Firmware1.7.3.zip" 无效。 错误: PX4固件部署出错,安装中止
#103 opened by finleygou - 0
e0 px4demo_attitude_system烧录进飞控后电机无响应,是pwm输出有问题吗
#102 opened by 719Nemolo - 0
免费高级版飞机解锁后RflySim3D无反应不飞行
#101 opened by yn0925 - 0
仿真的时候,过一两分钟飞机就不受控制了,是电脑配置不够吗?
#99 opened by LGDJCY - 1
关闭实时保护后,仍无法运行快捷方式脚本
#97 opened by Ricardo5979 - 0
加入自定义无人机模型 会出现 assertion failed 错误
#95 opened by w2385680516 - 2
- 1
使用simulink下载
#91 opened by Metear - 1
高级体验版 3DDisplay不会被安装
#93 opened by BOSSL13 - 0
- 2
安装完成后运行软件在环,QGC无法连接
#90 opened by LESLIEWANGer