RickMcConney/PenPlotter

Issues

• NOT a polar pen plotter Is a wall based pen plotter

  #38 opened 3 years ago by WalterHynson
  2

• Using CNC Shield V3 - Is it possible

  #35 opened 3 years ago by jjhamb
  1

• centering an .svg for multiple color layer plot.

  #36 opened 3 years ago by Susishiergeweest
  1

• Distortion in X axis

  #37 opened 3 years ago by mcnamarasculpture
  1

• Pen Up/Down

  #17 opened 6 years ago by mshaub
  7

• SVG does not import into processing window

  #34 opened 4 years ago by mcnamarasculpture
  1

• Inconsistent behaviour between gcode sent from controller and exported gcode

  #33 opened 4 years ago by SimonArnu
  2

• Hi Rick,

  #32 opened 4 years ago by Ailton-art
  1

• Doesn't compile on any Arduino IDE version for me

  #31 opened 5 years ago by Ohmarinus
  2

• Switching Z Servo to Stepper

  #30 opened 5 years ago by akzmonster
  2

• I think I'm missing where the motor pin assignments are.

  #29 opened 5 years ago by akzmonster
  1

• (FR) Adapiting for use with GRBL.

  #28 opened 5 years ago by ithinkido
  2

• Which firmware can be used for this software?Nuo or mega?

  #27 opened 5 years ago by zhangyuxxxzy
  1

• Cubic Bezier curves plotting

  #26 opened 5 years ago by monte-monte
  1

• How to add some new algoritms

  #25 opened 6 years ago by kave777
  1

• 32bit and updates

  #24 opened 6 years ago by phantomse
  1

• Unable to compile

  #21 opened 6 years ago by pearlson
  5

• Export Options

  #20 opened 6 years ago by TomSoto
  4

• Thank Yoy

  #19 opened 6 years ago by pepoteto
  0

• Polargraph / CoreXY

  #18 opened 6 years ago by jsecondo
  7

• Needs a button toggle to suppress the image while drawing.

  #14 opened 7 years ago by Shornone
  15

• Y axis works, X axis isn't working

  #16 opened 6 years ago by mshaub
  9

• Is this possible/worth porting this to ESP8266 with custom DRV8825 carrier shield?

  #15 opened 6 years ago by eimix
  3

• lcd support

  #13 opened 7 years ago by ekaggrat
  5

• Servo range not defined by default.txt?

  #12 opened 7 years ago by kongorillaSJK
  2

• license

  #7 opened 7 years ago by AdoHaha
  2

• Marlin status

  #8 opened 7 years ago by patriciorivera
  1

• G1 doesnt work for Z and E

  #9 opened 7 years ago by patriciorivera
  1

• Cannot find a class or type named "Handle

  #10 opened 7 years ago by 3dcasemonster
  2

• Why not use it as a proper cnc?

  #6 opened 8 years ago by marcogarzotti
  0

• gcode type

  #5 opened 8 years ago by mcmasterp
  2

• Compile problem

  #4 opened 8 years ago by moryde
  2

• Hardware Setup?

  #3 opened 8 years ago by krummrey
  1

• gondola out of frame if not set home at the beginning.

  #2 opened 9 years ago by patriciorivera
  2

• Error running from source

  #1 opened 9 years ago by patriciorivera
  3