/KidVPN

The world's smallest VPN server and client.

Primary LanguageCGNU General Public License v3.0GPL-3.0

KidVPN

The world's smallest VPN server and client (For SylixOS and Linux).

Configure File

  • Configure file is a ini format:
keywords description
mode KidVPN run mode, 'server' or 'client'
key_file KidVPN AES Key file
vnd_id Virtual network device ID (Only for SylixOS)
tap_name Virtual network device name (Only for Linux)
mtu 1280 ~ 1472 (Optional default: 1472)
local_ip Local IP address (Only for Server)
server Server IP address (Only for Client)
port Local port (Optional default: 10088)
  • Server configure like this:

[server_0]
mode=server
key_file=serv.key
vnd_id=0
tap_name=tap0
mtu=1472
local_ip=192.168.0.1
port=10088

  • Client configure like this:

[client_0]
mode=client
key_file=cli.key
vnd_id=0
tap_name=tap0
mtu=1472
server=123.123.123.123
port=10088

For SylixOS

  • Step 1: Add vnd interface parameter in /etc/ifparam.ini

[vnd-X]
#X is a number of vnd ID)
enable=1
enable(up) this interface
ipaddr=x.x.x.x
#should be a real ip address
netmask=x.x.x.x
#should be a real netmask
mac=xx:xx:xx:xx:xx:xx
#vnd mac address, If not, the system will use random numbers

  • Step 2: Use 'vnd' command add a virtual net device.

]# vnd add X
X is a number of vnd ID

  • Step 3: Use 'kidvpn' to create a VPN connect.

]# kidvpn x.ini sector password
'x.ini' is vpn config file, 'sector' is ini sector which we will use, 'password' is password

  • Step 4: Use 'route' command add some route entry to system, make route rules.

For Linux

  • Prepare for work:

]$ sudo apt-get install openssl
install OpenSSL library
]$ sudo apt-get install libssl-dev
install OpenSSL develop library
]$ make
make kidvpn tartget

  • Step 1: Add tap interface

]$ sudo tunctl -t tapX -u root
X is tap number
]$ sudo ifconfig tapX up

  • Step 2: Use 'ifconfig' command set tapX address

]$ ifconfig tapX inet x.x.x.x netmask x.x.x.x

  • Step 3: Use 'kidvpn' to create a VPN connect.

]$ sudo ./kidvpn x.ini sector password
'x.ini' is vpn config file, 'sector' is ini sector which we will use, 'password' is password

  • Step 4: Use 'route' command add some route entry to system, make route rules.

Enjoy yourself ^_^

For help: hanhui@acoinfo.com