Autotools Tutorial

This provides a tutorial on how to use autotools. Autotools provides a set of programs that allow you to create a configure script, which many linux users are familiar with as the common way to build apps from source: ./configure && make && make install.
Configure scripts are used for any decently sized program to ensure that the app is compatible with a larger set of system configurations.

The example C program is a simple webkit browser written in C that uses the webkit and gtk+ 2.0 libraries. The source file is cwebkit.c. This tutorial is based on autoconf v2.69.

Preliminary Instructions

Before diving into the autotools tutorial, it's a good idea to first test drive the actual program. The program itself requires the webkit-1.0 and gtk+-2.0 libraries.

You might already have these libraries installed. Use pkg-config to check if you have them installed:

pkg-config --list-all | grep 'webkit-1.0\|gtk+-2.0'

The pkg-config program should show that you have both webkit-1.0 and gtk+-2.0 installed. If you don't, you'll need to install them on your system. In Fedora, for example, the packages are called webkitgtk-devel and gtk2-devel. In Arch Linux they're called webkitgtk and gtk2. In Ubuntu they're called libwebkit-dev and libgtk2.0-dev, and so on...

Once you've determined that you have the correct libraries installed, rename Makefile.original to Makefile in the src directory, and run make to build the program. The program should build correctly. Then revert the filename back to Makefile.original so as to not conflict with autotools in later steps.

Run ./cwebkit in the src directory to test out the program. It takes a minute for the web page to load. You should see the DuckDuckGo main page, indicating that the browser app worked.

Open up the cwebkit.c and Makefile files to get a feel for how this simple program is structured, and then move on to the autotools tutorial instructions in the next section.

Instructions

Check that you have autotools installed.
Check that the programs autoscan, autoconf, aclocal, and automake are installed by typing, for example, whereis autoscan. Also, if you skipped the preliminary instructions, now is a good time to make sure that you have webkit and gtk installed.
View the Makefile.am files.
The automake Makefiles Makefile.am and src/Makefile.am contain the necessary information required for the automake program to create the Makefile.in versions of the Makefiles. The Makefile.in versions of the Makefiles are what's used by the configure script to generate the core Makefile that's used to run make and make install.
In the core directory, Makefile.am contains two lines only:

AUTOMAKE_OPTIONS = foreign
SUBDIRS = src

The first line, AUTOMAKE_OPTIONS, tells automake to disable many of GNUs annoying warning messages that are unnecessary for this tutorial.
The second line, SUBDIRS, tells automake to include the subdirectory called src, which contains the second and main Makefile. In the src directory, the Makefile.am contains the following:

AM_CFLAGS=-pthread -I/usr/include/webkitgtk-1.0 -I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/libdrm -I/usr/include/libpng16 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libpng16 -I/usr/include/pango-1.0 -I/usr/include/harfbuzz -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/libsoup-2.4 -I/usr/include/libxml2 -I/usr/include/webkitgtk-1.0 -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include
AM_LDFLAGS=-lwebkitgtk-1.0 -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lpangoft2-1.0 -lpango-1.0 -lfontconfig -lfreetype -lsoup-2.4 -lgio-2.0 -lgobject-2.0 -ljavascriptcoregtk-1.0 -lglib-2.0
bin_PROGRAMS = cwebkit
cwebkit_SOURCES = cwebkit.c

The first two lines are identical to the original Makefile Makefile.originals CFLAGS and LDFLAGS (when pkg-config is run on them), except that they are prefixed with AM_ so that automake will properly process them.
The CFLAGS are dervied by running pkg-config --cflags webkit-1.0 gtk+-2.0, and the LDFLAGS are derived by running pkg-config --libs webkit-1.0 gtk+-2.0.
The bin_PROGRAMS line tells automake which binary files it should make. In the original Makefile Makefile.original, this is equivalent to the cwebkit: line.
The cwebkit_SOURCES line tells automake which source files it should use to make the binary file cwebkit. In this simple example, cwebkit.c is all that's needed to make the binary file cwebkit, but this line could also include header files or other source files that are necessary to create the binary file.

Run autoscan to generate an autotools configuration file called configure.scan.
The autoscan program will automatically pick up information from cwebkit.c and the two Makefile.am files to fill in necessary info for the configuration file. The autoscan utility isn't perfect, however, and can miss many things, which is why the configure file needs to be manually edited to ensure that the final configure script is robust.
Rename configure.scan to configure.ac so that the autoconf program can recognize it.
Edit configure.ac and modify it as follows:
Remove the AC_CONFIG_HEADERS line. This simple tutorial doesn't have (or need) a corresponding config.h file.
(See the autoconf manual for more details on writing a config.h file).
Replace the AC_INIT line with metadata about the program:
AC_INIT([cwebkit], [0.1], [risto1@gmail.com])
Fix the library checks.
The AC_CHECK_LIBS lines will ensure that when ./configure is called, it doesn't fail in the build step when make is called and the user doesn't have a necessary libraries.
You may have had the frustrating situation when you run the ./configure && make && make install on an application you're trying to build from scratch and either the ./configure script fails or the build fails. This is usually due to an improperly written configure script.
One very easy and important step to avoid this is to ensure that your configure script checks that all library dependencies are installed. You should offer a descriptive error message to the user rather than a default (and often cryptic) one when the user is in the middle of building your program.
autoconf picked up some dependencies but not all of them. Modify the AC_CHECK_LIBS lines with the following:

AC_CHECK_LIB([webkitgtk-1.0], [webkit_web_view_load_uri], [], [
              echo "The webkit library is required for this program."
              exit -1])
AC_CHECK_LIB([gtk-x11-2.0], [gtk_init], [], [
              echo "The gtk library is required for this program."
              exit -1])
AC_CHECK_LIB([cairo], [cairo_set_font_size], [], [
              echo "The cairo library is required for this program."
              exit -1])
AC_CHECK_LIB([fontconfig], [FcInitLoadConfig], [], [
              echo "The fontconfig library is required for this program."
              exit -1])
AC_CHECK_LIB([freetype], [FT_Init_FreeType], [], [
              echo "The freetype library is required for this program."
              exit -1])

The first parameter for AC_CHECK_LIB is the name of the library to check. To see all libraries required by this program, type in pkg-config --libs webkit-1.0 gtk+-2.0. Not all of the required libraries are here for the sake of simplicity, but you probably want to add them all if you're writing an application for other people to use (rather than have it break in the middle of the build for some poor user).
The second parameter requires you to specify a function that exists in that library. In the fourth parameter, you need to put the commands on separate lines so that the configure script can properly exit when a library is not found.
The signature for this macro is:
AC_CHECK_LIB (library, function, [action-if-found], [action-if-not-found], [other-libraries])
More info on AC_CHECK_LIB can be found in the autoconf manual.
See (or diff) the configure.ac.sample file to make sure that you edited everything correctly.

Run autoconf to generate the first state of the configuration script.
Add AM_INIT_AUTOMAKE before the AC_OUTPUT line.
This macro is required to invoke automake. It tells automake to generate Makefiles after the configure script is run.
If you don't put the line before AC_OUTPUT, you will get this error message when building:
Error: Makefile: : *** missing separator. Stop..
Run:

aclocal
autoconf
automake -a

The aclocal program creates an aclocal.m4 file that's used by autoconf.
Rerunning autoconf with the AM_INIT_AUTOMAKE macro line and the aclocal.m4 file in place ensures that the configure script is finally ready. If you need to redo this step or change configure.ac, you can run autoreconf to rerun all necessary steps.
The automake -a line generates the Makefile.in files that are used by the configure script to create the real Makefile file that's used when make and make install are invoked.

That's it! now you can test your configure script:

./configure && make && make install

or if you are using sudo:

./configure && make && sudo make install

The binary files are normally installed under /usr/bin/local for linux systems. This path is usually included in the $PATH variable. You should therefore be able to run the program simply by typing cwebkit!

To uninstall the build for whatever reason, you can just type:

sudo make uninstall

And if you want to install it in a different directory, say /home/myusername/cwebkit, you can do:

./configure --prefix=/home/myusername/cwebkit && make && make install

Or if you just want it to install in the current folder, then skip the make install part of the process.

And finally, if you want to create a distribution .tar.gz package file for others to use, you can type:

make dist

That's it! I hope you found this tutorial very helpful and informative!

Risto-Stevcev/c-autotools

Autotools Tutorial

Preliminary Instructions

Instructions