/3D_Piezoelectric_Shoe

This repository contains the 3D models developed for better visualization of generating energy by applying pressure on a piezoelectric shoe or "SmartFeet", which in turn is made up of 25 (or 26) piezoelectric sensors embedded in each shoe, a 47 μF/ 4.50V capacitor, a full wave bridge rectifier (four 1N914 diodes), a diode (also of model 1N914), a LED (model NSPW500BS), a resistive load (1 kΩ) connected using wires. Since a piezoelectric sensor can't be used in the LTSpice directive, we have used a SINE(0 5) voltage source to replicate the same at increments of 2V, alongside a slideswitch.

Primary LanguageGnuplotBSD 3-Clause "New" or "Revised" LicenseBSD-3-Clause

Stargazers