RobertGawron/DDSFunctionGenerator

Issues

• Create GUI mockup

  #95 opened 5 years ago by RobertGawron
  1

• What is the voltage needed for LCD module? 3v3 or 5v?

  #171 opened 4 months ago by RobertGawron
  1

• Fix USB footprint

  #148 opened 3 years ago by RobertGawron
  1

• Replace fancy encoder by 4 buttons

  #172 opened 3 years ago by RobertGawron
  0

• Use shellcheck to check statically shell scripts

  #161 opened 3 years ago by RobertGawron
  0

• Print mechanical parts

  #160 opened 3 years ago by RobertGawron
  1

• Create firmware

  #159 opened 3 years ago by RobertGawron
  0

• Assembly device (only electronic, no mechanic parts)

  #158 opened 3 years ago by RobertGawron
  0

• Add description of pins for UART/PROGRAMMING/LCD sockets to facilitate usage of PCB

  #153 opened 3 years ago by RobertGawron
  0

• Add project name and revision on description layer (top, bottom) on PCB

  #151 opened 3 years ago by RobertGawron
  0

• Place designators of components horizontally to improve redability

  #152 opened 3 years ago by RobertGawron
  0

• There is no mounting holes on PCB, find a good place to add them.

  #156 opened 3 years ago by RobertGawron
  0

• Improve U2, C6, C2 placement on PCB

  #149 opened 3 years ago by RobertGawron
  0

• Move R14, C63 to top layer

  #150 opened 3 years ago by RobertGawron
  0

• Check order of pin 2 and 3 on the USB socket

  #26 opened 3 years ago by RobertGawron
  1

• Check bottom/top layer correctness before ordering PCB

  #49 opened 3 years ago by RobertGawron
  1

• Finish preparing order for BOM (find components and add them to shopping card)

  #63 opened 3 years ago by RobertGawron
  1

• Add 3D model of enclosure

  #50 opened 5 years ago by RobertGawron
  1

• Add draft of Forth usage.

  #52 opened 4 years ago by RobertGawron
  1

• Remove LTSpice from GitHub language counting statistics

  #133 opened 4 years ago by RobertGawron
  1

• Fix grammar mistakes found by Code Spell Checker add-on in VSCode.

  #130 opened 4 years ago by RobertGawron
  0

• Add JTAG to the board

  #25 opened 5 years ago by RobertGawron
  1

• Add SD-card support on PCB.

  #6 opened 5 years ago by RobertGawron
  1

• Add 3D model of transformer

  #51 opened 5 years ago by RobertGawron
  1

• Add tantalum decoupling cap for dds chip

  #30 opened 5 years ago by RobertGawron
  1

• Add 50Ohm and 75Ohm output.

  #7 opened 5 years ago by RobertGawron
  1

• How to connect Vin+, Vin- of AD8325?

  #27 opened 5 years ago by RobertGawron
  0

• Set sleep pin to Vcc in amplifier

  #31 opened 5 years ago by RobertGawron
  0

• Add noise generator.

  #9 opened 5 years ago by RobertGawron
  1

• Would it be good to add some basic ADC input?

  #8 opened 5 years ago by RobertGawron
  1

• Add digital output.

  #10 opened 5 years ago by RobertGawron
  1

• Add CI

  #11 opened 5 years ago by RobertGawron
  0

• Update README.md for render of PCB.

  #12 opened 5 years ago by RobertGawron
  1