/ctools_lab

Primary LanguageC

ctools_lab

This is the experimental CMSIS-Toolbox Laboratory for csolution - CMSIS Project Manager.

It is possible to create Blinky and IoT (AWS MQTT Demo) examples for different boards using csolution and cproject YML files.

Available examples:

Prerequisites

Tools:

CMSIS packs: see examples for list of required packs

Blinky project

Subdirectory: example/Blinky

Simple project blinking LEDs. See details in README.md.

Required CMSIS packs are listed in file Blinky.csolution.yml.

Project is available for for different build types and for different boards. See table Boards - Examples.

Build and Run

  1. start in folder ./example/Blinky/

  2. Use csolution to create .cprj project

csolution convert -s Blinky.csolution.yml -c Blinky.<build-type>+<target-type>

    <build-type>:  Debug | Release
    <target-type>: <board name>

example: csolution convert -s Blinky.csolution.yml -c Blinky.Debug+32L4R9IDISCOVERY

  1. Use cbuild or MDK to build the created project
  • cbuild:
cbuild Blinky.<build-type>+<target-type>.cprj

example: cbuild Blinky.Debug+32L4R9IDISCOVERY.cprj

  • MDK:
    • import *.cprj and build
  1. Run the demo
  • power the board and establish debug connection
  • program the image to the target
  • run the program

AWS MQTT Demo

Subdirectory: example/IoT/AWS_MQTT_MutualAuth_Demo

Demo for connecting to AWS cloud. See details in README.md.

Note: Make sure to update the credentials as described.

Required CMSIS packs are listed in file IoT.csolution.yml.

Project is available for different build types, for different boards, for different WiFi modules and Ethernet connection. See table Boards - Examples.

Build and Run

  1. start in folder ./example/IoT/

  2. Use csolution to create .cprj project

csolution convert -s IoT.csolution.yml -c AWS_MQTT_MutualAuth_Demo.<build-type>+<target-type>

    <build-type>:  Debug | Release
    <target-type>: <board-name>[+<module-name>]
    <module-name>: ESP8266 | ISM43362 | WizFi360
    
    Note: if optional <module-name> is not spezified then on-board WifI or on-board Ethernet is used.

example: csolution convert -s IoT.csolution.yml -c AWS_MQTT_MutualAuth_Demo.Debug+32L4R9IDISCOVERY_ESP8266

  1. Configure CMSIS-Driver
    Note: due to current importer limitation it is necessary to manually configure the used CMSIS-Driver. According table Boards - Examples choose the correct serial driver number for Driver_USART or Driver_SPI.

  2. Use cbuild or MDK to build the created project

  • cbuild:
cbuild AWS_MQTT_MutualAuth_Demo/AWS_MQTT_MutualAuth_Demo.<build-type>+<target-type>.cprj

example: cbuild AWS_MQTT_MutualAuth_Demo/AWS_MQTT_MutualAuth_Demo.Debug+32L4R9IDISCOVERY.cprj

  • MDK:
    • import AWS_MQTT_MutualAuth_Demo/*.cprj and build
      Note: due to current importer limitation it is necessary to manually add the following preprocessor define MBEDTLS_CONFIG_FILE=\"aws_mbedtls_config.h\"
  1. Run the demo
  • power the board and establish debug connection
  • open terminal and connect to board's serial port (Baud rate: 115200)
  • program the image to the target
  • reset the target and observe messages in the terminal

Boards - Examples

Board Name Blinky AWS MQTT Demo ext. WiFi ESP8266 ext. WiFi ISM43362 ext. WiFi WizFi360 on-board WiFi on-board Ethernet
32F746GDISCOVERY [x] [x] [x] UART# 6 [x] SPI# 2 [x] UART# 6 [ ] [x]
32L4R9IDISCOVERY [x] [x] [x] UART# 6 [x] SPI# 2 [x] UART# 6 [ ] [ ]
B-L475E-IOT01A [x] [ ] [ ] [ ] [ ] [x] [ ]
FRDM-K32L3A6 [x] [x] [x] UART# 1 [x] SPI# 0 [x] UART# 1 [ ] [ ]
IMXRT1050-EVKB [x] [x] [x] UART# 3 [ ] [x] UART# 3 [ ] [x]
LPC54018-IoT-Module [x] [x] [ ] [ ] [ ] [x] [ ]
LPCXpresso55S69 [x] [x] [x] UART# 2 [x] SPI# 8 [x] UART# 2 [ ] [ ]
MCB4300 [ ] [x] [ ] [ ] [ ] [ ] [x]
MIMXRT1064-EVK [x] [x] [x] UART# 3 [ ] [x] UART# 3 [ ] [x]
Musca-S1 [x] [x] [x] UART# 0 [ ] [x] UART# 0 [ ] [ ]
NUCLEO-G474RE [x] [ ] [ ] [ ] [ ] [ ] [ ]
NUCLEO-L552ZE-Q [x] [x] [x] UART# 3 [x] SPI# 1 [x] UART# 3 [ ] [ ]
STM32G071B-DISCO [x] [ ] [ ] [ ] [ ] [ ] [ ]
STM32H745I-DISCO [x] [ ] [ ] [ ] [ ] [ ] [ ]
STM32L562E-DK [x] [x] [x] UART# 6 [x] SPI# 3 [x] UART# 6 [ ] [ ]
AVH_MPS3_Corstone-300 [x] [x] [ ] [ ] [ ] [ ] [x]
AVH_MPS2_Cortex-M7 [x] [x] [ ] [ ] [ ] [ ] [x]