/TivaWare_C_Series-2.1.0.12573

HASC project Repository

Primary LanguageC

TivaWare_C_Series-2.1.0.12573

Documentation still in progress....

Waireless Autontomous Robot (WAR) project Repository

Prerequisites:

  1. Kivy GUI library
  1. launchad drivers for the Tiva C Launchpad 1294

There are two options to run the program on the 1294 launchpads

  1. After you've installed Keil microvision, and the Tiva launchpad, you can download this repository, and replace this folder inside the "C:\ti" like this:

    C:\ti\TivaWare_C_Series-2.1.0.12573

  2. You can download this repository, and only take the next two folders (cc3000 & ek-tmrc1294xl-boost-cc3000):

    TivaWare_C_Series-2.1.0.12573\cc3000

    TivaWare_C_Series-2.1.0.12573\examples\boards\ek-tm4c1294xl-boost-cc3000

and replace them in the following paths:

 C:\ti\TivaWare_C_Series-2.1.0.12573\cc3000

 C:\ti\TivaWare_C_Series-2.1.0.12573\examples\boards\ek-tm4c1294xl-boost-cc3000

GUI (Graphical User Interface)

the main GUI file (br_gui.py) is located in

 TivaWare_C_Series-2.1.0.12573/gui

When you run the GUI make sure your computer and the Tiva C Launchpad are connected to the same network, and that you know the IP address of your cc3000 boosterpack after it has connected to the internet To find out the IP address of the cc3000, you can open a serial connection while you turn on the Tiva C Launchpad, and the IP address will be displayed on the serial port.