The ROS In-hand scanner provides a 3D Scanning application based on the PCL In-hand scanner for small objects by Martin Sälzle and the PCL developers.
Original PCL Documentation can be found here:
http://pointclouds.org/documentation/tutorials/in_hand_scanner.php
The following video shows a scanning process using Intel RealSense Camera. https://drive.google.com/file/d/0B-EoR_OK9GCgcEw3V0l1ZnNPU2s/view
This package needs PCL 1.8.0 to be installed. For further information, see the following link: http://pointclouds.org/documentation/tutorials/compiling_pcl_posix.php#experimental
#Prepare Workspace
source /opt/ros/indigo/setup.bash
mkdir -p ~/rihs_ws/src
cd ~/rihs_ws/src
catkin_init_workspace
cd ~/rihs_ws/
catkin_make
source devel/setup.bash
#Get ROS In-hand scanner
cd ~/rihs_ws/src
git clone http://github.com/RodBelaFarin/ros_in_hand_scanner
cd ~/rihs_ws/
#Install
rosdep update
rosdep install ros_in_hand_scanner
catkin_make
Subscriber Topic: camera/depth_registered/points
Message Type: sensor_msgs/PointCloud2
Description: organized point cloud
Some quick infos on how to use.
Start the ROS In-hand scanner:
roscore
rosrun ros_in_hand_scanner ros_in_hand_scanner_node
Due to performance issues, a realtime registration is very slow with down to < 0.1 fps. A workaround is to record a rosbag file during the scanprocess itself. You can use the preview window to get a view of your actual scan orientation. Play the rosbag file afterwards with a low rate ~0.1 and start registration now. Follow the hints in the PCL documentation for your scan process.