Rodemfr/MicronetToNMEA

Issues

• No Display value for GNSS

  #90 opened a year ago by dwarning
  1

• Bootloop with PlatformIO Teensy package ver. 4.18.0 / 1.58

  #84 opened 2 years ago by j-lang
  5

• Undocumented Micronet sentence from wind transducer

  #62 opened 2 years ago by tvr256
  3

• Add depth offset to NMEA DPT sentence

  #65 opened 2 years ago by tvr256
  6

• Add support for performance data

  #82 opened 2 years ago by Rodemfr
  0

• Add support for automatic magnetic variation

  #60 opened 2 years ago by Rodemfr
  7

• Add the possibility to simulate SPD with SOG

  #80 opened 2 years ago by Rodemfr
  1

• Wireless serial devices for NMEA link (BT or WiFi) - which ESP8266 firmware

  #78 opened 2 years ago by j-lang
  3

• Water speed displayed when no speed sensor connected

  #72 opened 2 years ago by tvr256
  8

• Release notes

  #76 opened 2 years ago by j-lang
  1

• Visual Studio configuration will not load

  #75 opened 2 years ago by tvr256
  7

• Add a way to easily configure compass pointing axis

  #71 opened 2 years ago by Rodemfr
  1

• Suspicion of bad tilt compensation in heading calculation

  #61 opened 2 years ago by Rodemfr
  22

• Teensy 4.0 stops receiving packets

  #59 opened 2 years ago by j-lang
  35

• Display Depth offset in MTN menu 1

  #68 opened 2 years ago by tvr256
  1

• Repeating VHW sentences

  #66 opened 2 years ago by tvr256
  4

• few quirks

  #67 opened 2 years ago by dwarning
  3

• Buffer overflows when sending multiple NMEA sentences to MTN

  #58 opened 2 years ago by tvr256
  15

• Data precision in HDG and VHW sentences

  #64 opened 2 years ago by tvr256
  2

• Incorrect magnetic heading values with LSM303DLHC

  #29 opened 2 years ago by Rodemfr
  55

• Use FSCTRL0/FREQOFF to calibrate XTAL

  #47 opened 2 years ago by Rodemfr
  2

• SPI signal anomaly

  #55 opened 2 years ago by dwarning
  5

• CC1101 Driver is probably not handling SPI timings as it should

  #57 opened 2 years ago by Rodemfr
  1

• Micronet network not detected with Teensy 4.0

  #53 opened 2 years ago by tvr256
  19

• HDG info not sent to Micronet?

  #50 opened 2 years ago by frgaude
  13

• Timing evaluation for spi burst transfer

  #43 opened 2 years ago by dwarning
  14

• Stability dependent from freqOffset starting values

  #14 opened 2 years ago by dwarning
  35

• Cleaning up

  #44 opened 2 years ago by dwarning
  2

• Few code cleanings needed

  #28 opened 2 years ago by dwarning
  9

• data for testing

  #35 opened 2 years ago by valgit
  1

• actual git not working for T3.6

  #37 opened 2 years ago by dwarning
  6

• Problems with wind repeating feature

  #25 opened 2 years ago by Rodemfr
  7

• Use XDR instead of XDG

  #26 opened 2 years ago by dwarning
  8

• VMC and VMGWP

  #27 opened 2 years ago by dwarning
  1

• Operation without master prevents $INHDG transmit

  #20 opened 2 years ago by dwarning
  2

• Lowering SPI clock

  #19 opened 2 years ago by dwarning
  4

• No Micronet signal receiving with last version

  #11 opened 2 years ago by j-lang
  77

• esp32-trial - does this branch work?

  #3 opened 3 years ago by j-lang
  3

• unused variable

  #22 opened 2 years ago by dwarning
  1

• Static analyze in freq_tracking branch

  #18 opened 2 years ago by dwarning
  1

• Reduce power consumption by setting CC1101 to low power mode

  #13 opened 2 years ago by Rodemfr
  17

• New calculated frequency offset not considered

  #15 opened 2 years ago by dwarning
  1

• Auto fine tune with new driver

  #10 opened 2 years ago by davidwkerr
  16

• SW Crashes after 1-2 hours of conversion

  #12 opened 2 years ago by Rodemfr
  12

• Not all messages where displayed

  #4 opened 2 years ago by j-lang
  61

• Deviation

  #8 opened 3 years ago by davidwkerr
  12

• Magnetic heading should be included in NMEA output

  #9 opened 3 years ago by Rodemfr
  2

• No Networks Found

  #2 opened 3 years ago by mattnj
  18

• Hi

  #1 opened 4 years ago by coylen
  2