/DenseNet

Densely Connected Convolutional Networks, In CVPR 2017 (Best Paper Award).

Primary LanguageLuaBSD 3-Clause "New" or "Revised" LicenseBSD-3-Clause

Densely Connected Convolutional Networks (DenseNets)

This repository contains the code for DenseNet introduced in the paper "Densely Connected Convolutional Networks" (CVPR 2017, Best Paper Award) by Gao Huang*, Zhuang Liu*, Laurens van der Maaten and Kilian Weinberger (* Authors contributed equally).

Now with much more memory efficient implementation!. Please check the technical report and code for more infomation.

The code is built on fb.resnet.torch.

Citing DenseNet

If you find DenseNet useful in your research, please consider citing:

@inproceedings{huang2017densely,
  title={Densely connected convolutional networks},
  author={Huang, Gao and Liu, Zhuang and van der Maaten, Laurens and Weinberger, Kilian Q },
  booktitle={Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition},
  year={2017}
}

Other Implementations

  1. Our Caffe Implementation.
  2. Our memory-efficient Caffe Implementation.
  3. Our memory-efficient PyTorch Implementation.
  4. PyTorch Implementation by Andreas Veit.
  5. PyTorch Implementation by Brandon Amos.
  6. MXNet Implementation by Nicatio.
  7. MXNet Implementation (supporting ImageNet) by Xiong Lin.
  8. Tensorflow Implementation by Yixuan Li.
  9. Tensorflow Implementation by Laurent Mazare.
  10. Tensorflow Implementation (with BC structure) by Illarion Khlestov.
  11. Lasagne Implementation by Jan Schlüter.
  12. Keras Implementation by tdeboissiere.
  13. Keras Implementation by Roberto de Moura Estevão Filho.
  14. Keras Implementation (with BC structure) by Somshubra Majumdar.
  15. Chainer Implementation by Toshinori Hanya.
  16. Chainer Implementation by Yasunori Kudo.

Note that we only listed some early implementations here, and didn't label all implementations which support BC structures.

Projects build on DenseNets

  1. Multi-Scale Dense Convolutional Networks for Efficient Prediction by Gao Huang.
  2. DSOD: Learning Deeply Supervised Object Detectors from Scratch by Zhiqiang Shen, Zhuang Liu, etc. (In ICCV 2017)
  3. Fully Convolutional DenseNets for segmentation by Simon Jegou.

Contents

  1. Introduction
  2. Usage
  3. Results on CIFAR
  4. Results on ImageNet and Pretrained Models
  5. Updates

Introduction

DenseNet is a network architecture where each layer is directly connected to every other layer in a feed-forward fashion (within each dense block). For each layer, the feature maps of all preceding layers are treated as separate inputs whereas its own feature maps are passed on as inputs to all subsequent layers. This connectivity pattern yields state-of-the-art accuracies on CIFAR10/100 (with or without data augmentation) and SVHN. On the large scale ILSVRC 2012 (ImageNet) dataset, DenseNet achieves a similar accuracy as ResNet, but using less than half the amount of parameters and roughly half the number of FLOPs.

Figure 1: A dense block with 5 layers and growth rate 4.

densenet Figure 2: A deep DenseNet with three dense blocks.

Usage

  1. Install Torch ResNet (https://github.com/facebook/fb.resnet.torch) and required dependencies like Torch and cuDNN.
  2. Add the files densenet.lua and DenseConnectLayer.lua to the folder models/.
  3. Replace opts.lua, train.lua and models/init.lua in the original repo by the corresponding files in this repo.

As an example, the following command trains a DenseNet-BC with depth L=100 and growth rate k=12 on CIFAR-10:

th main.lua -netType densenet -dataset cifar10 -batchSize 64 -nEpochs 300 -depth 100 -growthRate 12

As another example, the following command trains a DenseNet-BC with depth L=121 and growth rate k=32 on ImageNet:

th main.lua -netType densenet -dataset imagenet -data [dataFolder] -batchSize 256 -nEpochs 90 -depth 121 -growthRate 32 -nGPU 4 -nThreads 16 -optMemory 3

Please refer to fb.resnet.torch for data preparation.

DenseNet and DenseNet-BC

By default, the code runs with the DenseNet-BC architecture, which has 1x1 convolutional bottleneck layers, and compresses the number of channels at each transition layer by 0.5. To run with the original DenseNet, simply use the options -bottleneck false and -reduction 1

Memory efficient implementation (newly added feature on June 6, 2017)

There is an option -optMemory which is very useful for reducing GPU memory footprint when training a DenseNet. By default, the value is set to 2, which activates the shareGradInput function (with small modifications from here). There are two extreme memory efficient modes (-optMemory 3 or -optMemory 4) which use a customized densely connected layer. With -optMemory 4, the largest 190-layer DenseNet-BC on CIFAR can be trained on a single NVIDIA TitanX GPU (uses 8.3G of 12G) instead of fully using four GPUs with the standard (recursive concatenation) implementation .

More details about the memory efficient implementation are discussed here.

Results on CIFAR

The table below shows the results of DenseNets on CIFAR datasets. The "+" mark at the end denotes for standard data augmentation (random crop after zero-padding, and horizontal flip). For a DenseNet model, L denotes its depth and k denotes its growth rate. On CIFAR-10 and CIFAR-100 without data augmentation, a Dropout layer with drop rate 0.2 is introduced after each convolutional layer except the very first one.

Model Parameters CIFAR-10 CIFAR-10+ CIFAR-100 CIFAR-100+
DenseNet (L=40, k=12) 1.0M 7.00 5.24 27.55 24.42
DenseNet (L=100, k=12) 7.0M 5.77 4.10 23.79 20.20
DenseNet (L=100, k=24) 27.2M 5.83 3.74 23.42 19.25
DenseNet-BC (L=100, k=12) 0.8M 5.92 4.51 24.15 22.27
DenseNet-BC (L=250, k=24) 15.3M 5.19 3.62 19.64 17.60
DenseNet-BC (L=190, k=40) 25.6M - 3.46 - 17.18

Results on ImageNet and Pretrained Models

Torch

The Torch models are trained under the same setting as in fb.resnet.torch. The error rates shown are 224x224 1-crop test errors.

Network Top-1 error Torch Model
DenseNet-121 (k=32) 25.0 Download (64.5MB)
DenseNet-169 (k=32) 23.6 Download (114.4MB)
DenseNet-201 (k=32) 22.5 Download (161.8MB)
DenseNet-161 (k=48) 22.2 Download (230.8MB)

Caffe

For ImageNet pretrained Caffe models, please see https://github.com/shicai/DenseNet-Caffe. Also, we would like to thank @szq0214 for help on Caffe models.

PyTorch

In PyTorch, ImageNet pretrained models can be directly loaded by

import torchvision.models as models
densenet = models.densenet161(pretrained=True)

For ImageNet training, customized models can be constructed by simply calling

DenseNet(growth_rate=32, block_config=(6, 12, 24, 16), num_init_features=64, bn_size=4, drop_rate=0, num_classes=1000)

See more details at PyTorch documentation on models and the code for DenseNet. We would like to thank @gpleiss for this nice work in PyTorch.

Keras, Tensorflow and Theano

Please see https://github.com/flyyufelix/DenseNet-Keras.

Wide-DenseNet for better Time/Accuracy and Memory/Accuracy Tradeoff

If you use DenseNet as a model in your learning task, to reduce the memory and time consumption, we recommend use a wide and shallow DenseNet, following the strategy of wide residual networks. To obtain a wide DenseNet we set the depth to be smaller (e.g., L=40) and the growthRate to be larger (e.g., k=48).

We test a set of Wide-DenseNet-BCs and compared the memory and time with the DenseNet-BC (L=100, k=12) shown above. We obtained the statistics using a single TITAN X card, with batch size 64, and without any memory optimization.

Model Parameters CIFAR-10+ CIFAR-100+ Time per Iteration Memory
DenseNet-BC (L=100, k=12) 0.8M 4.51 22.27 0.156s 5452MB
Wide-DenseNet-BC (L=40, k=36) 1.5M 4.58 22.30 0.130s 4008MB
Wide-DenseNet-BC (L=40, k=48) 2.7M 3.99 20.29 0.165s 5245MB
Wide-DenseNet-BC (L=40, k=60) 4.3M 4.01 19.99 0.223s 6508MB

Obersevations:

  1. Wide-DenseNet-BC (L=40, k=36) uses less memory/time while achieves about the same accuracy as DenseNet-BC (L=100, k=12).
  2. Wide-DenseNet-BC (L=40, k=48) uses about the same memory/time as DenseNet-BC (L=100, k=12), while is much more accurate.

Thus, for practical use, we suggest picking one model from those Wide-DenseNet-BCs.

Updates

06/06/2017:

  1. Support ultra memory efficient training of DenseNet with customized densely connected layer.

  2. Support memory efficient training of DenseNet with standard densely connected layer (recursive concatenation) by fixing the shareGradInput function.

05/17/2017:

  1. Add Wide-DenseNet.
  2. Add keras, tf, theano link for pretrained models.

04/20/2017:

  1. Add usage of models in PyTorch.

03/29/2017:

  1. Add the code for imagenet training.

12/03/2016:

  1. Add Imagenet results and pretrained models.
  2. Add DenseNet-BC structures.

Contact

liuzhuangthu at gmail.com
gh349 at cornell.edu
Any discussions, suggestions and questions are welcome!