= Introduction = Libcrafter is a high level library for C++ designed to create and decode network packets. It is able to craft or decode packets of most common networks protocols, send them on the wire, capture them and match requests and replies. It enables the creation of networking tools in a few lines with a interface very similar to Scapy. A packet is described as layers that you stack one upon the other. Fields of each layer have useful default values that you can overload. The library is designed to be used in multithreaded programs where you can combine several tasks simultaneously. For example, you can easily design something that sniffs, mangles, and sends at the same time you are doing an ARP-Spoofing attack. It also contains a very naive implementation of the TCP/IP stack (fragmentation is no handled yet) at user level that enables working with TCP streams. This facilitates the creation of tools for data injection on arbitrary connections, IP spoofing and TCP/IP session hijacking. You can find information and news about the project at: http://code.google.com/p/libcrafter/ or you can follow the development of Libcrafter at: https://github.com/pellegre/libcrafter Libcrafter is also distributed in latest Backtrack releases. Examples are frequently updated on: https://github.com/pellegre/libcrafter-examples = Installation To compile libcrafter from the git repository you should have autoconf and libtool installed in your system : $ sudo apt-get install autoconf libtool Clone the repository and compile the library : $ git clone https://github.com/pellegre/libcrafter $ cd libcrafter/libcrafter $ ./autogen.sh $ make $ sudo make install $ sudo ldconfig = Information = Supported protocols are: Ethernet, SLL (Linux cooked-mode capture), ARP, DHCP, DHCP options, IP, IP options, IPv6, ICMP, ICMPv6, ICMP extensions, ICMPv6 extensions, TCP, TCP options, UDP and DNS IEEE802.11 coming soon! = License = This project is licensed under the terms of the new BSD license (see LICENSE file for more details)