HubConnect Custom Drivers

A collection of custom drivers to use with HubConnect

Using these Custom Drivers with HubConnect

Install and Configure Custom Driver on your HubConnect Server (master)

Install and save the desired Custom Driver in the Drivers section of your HubConnect Server.
On the HubConnect Server:
- Open the HubConnect Server for Hubitat application
- Click on Manage Custom Drivers
- Click on Add A Driver
- Fill in the Attribute Class Name and Device Driver Name as shown below for the driver you installed in step 1.
- Select the Attribute 1/18 type from the options list, as shown below
- Fill in the remainder of the Attributes as shown below
Click Save
Click Done
Click Home (or Next)

Install Custom Driver on any HubConnect Remote Clients

This is only necessary if you want to reflect a Custom Device as a device on your Remote Client. If the device is physically installed on your Remote Client, you do not need to install the Custom Device (but it doesn't hurt anything if you do).

Install and save the desired Custom Driver in the Drivers section of the HubConnect Remote Client that you want to use the (reflected) device on. Note that some drivers will not work on SmartThings Hubs

Reflect a Custom Device from your HubConnect Server

Open the appropriate HubConnect Server Instance application for the target Remote Client
Click on Connect local devices to Remote Hub
Click on Custom Devices
Click on the desired Custom Driver definition
Select the desired local devices that you want to reflect using this driver. Be sure that the Custom Driver is already installed on the Remote Client!
When finished, click Done/Next all the way back to the main menu

Reflect a Custom Device from a HubConnect Remote Client

Open HubConnect Remote Client application on the Remote Hub
Click on Select devices to synchronize to Server hub
Click on Custom Devices. Here you should see the list of Custom Drivers that you Installed & Configured in the very first step above.
Click on the desired Custom Driver definition
Select the desired local devices that you want to reflect using this driver. Be sure that the Custom Driver is already installed on the Remote Client!
When finished, click Done/Next all the way back to the main menu

HubConnect EchoSpeaks

importUrl: https://raw.githubusercontent.com/SANdood/HubConnect-Custom-Drivers/master/HubConnect%20EchoSpeaks

Works With Echo Speaks by Anthony Santilli (@tonesto7)

Hubitat webSockets-only, as HubConnect limits the number of attributes that can be reflected via http. Cannt be used with SmartThings-hosted Echo Speaks, nor to reflect Hubitat-hosted Echo Speaks to a SmartThings hub.

HubConnect Configuration

Attribute Class Name: EchoSpeaks
Device Driver Name: HubConnect Echo Speaks Device
Attribute 1/18: speechSynthesis
Attribute 2/18: mute
Attribute 3/18: level
Attribute 4/18: volume
Attribute 5/18: alarmVolume
Attribute 6/18: doNotDisturb
Attribute 7/18: alexaWakeWord
Attribute 8/18: currentAlbum
Attribute 9/18: currentStation
Attribute 10/18: wasLastSpokenToDevice
Attribute 11/18: status
Attribute 12/18: deviceStatus
Attribute 13/18: onlineStatus
Attribute 14/18: followUpMode
Attribute 15/18: nediaSource
Attribute 16/18: lastUpdated
Attribute 17/18: alexaPlaylists
Attribute 18/18: alexaGuardStatus

HubConnect Ecobee Suite Sensor

importUrl:

Designed for reflecting SmartThings-based Ecobee Suite Sensors to Hubitat, or Hubitat to Hubitat. Will not save as a SmartThings DTH

HubConnect Configuration

Attribute Class Name: ESSensor
Device Driver Name: HubConnect Ecobee Suite Sensor
Attribute 1/18: temperatureMeasurement
Attribute 2/18: motion
Attribute 3/18: Awake // Sensor used in Awake Program? off = no, on = yes
Attribute 4/18: Away // Sensor used in Away Program?
Attribute 5/18: Home // Sensor used in Home Program?
Attribute 6/18: Sleep // Sensor used in Sleep Program?
Attribute 7/18: Fan Only
Attribute 8/18: programsList
Attribute 9/18: SmartRoom
Attribute 10/18: Wakeup // Sensor used in Wakeup Program?
Attribute 11/18: currentProgramName
Attribute 12/18: doors
Attribute 13/18: humidity
Attribute 14/18: thermostatId
Attribute 15/18: windows
Attribute 16/18: vents

HubConnect Ecobee Suite Thermostat

Works With Ecobee Suite

As of HubConnect 1.6.1, users can now configure up to 50 attributes to be reflected from an http-connected sources (SmartThings, or Hubitat configured not to use WebSockets). Listed below are the required, recommended, alternative and not recommended attributes that you can configure. (Note that for Hubbbitat-based HubConnected hubs using WebSockets, ALL attribbutes will be reflected and updated). importUrl:
Designed for reflecting Ecobee Suite Thermostats to Hubitat hubs only. Will not save as a SmartThings DTH.
IMPORTANT NOTE: Ecobee Suite Helpers are NOT supported by this reflected device!

HubConnect Configuration

Attribute Class Name: ESThermostat
Device Driver Name: HubConnect Ecobee Suite Thermostat
Primary attribute: thermostatOperatingState

Required Attributes

coolingSetpoint
coolingSetpointRange
heatingSetpoint
heatingSetpointRange
humidity
motion
schedule
supportedThermostatFanModes
supportedThermostatModes
temperature
thermostatFanMode
thermostatMode
thermostatSetpoint
thermostatSetpointRange

Recommended Attributes

autoAway
coolDifferential

Alternative Attributes

autoHeatCoolFeatureEnabled // wether autoMode is enabled (change with setEcobeeSetting()
currentProgram // e.g. "Home"
currentProgramName // e.g. "Hold: Home"

Possibilities

backlightOffDuringSleep
backlightOffTime
backlightOnIntensity
backlightSleepIntensity
brand
coolAtSetpoint

Not Recommended

Most of these you will configure once, and then they will never change. Or, they are internal-use only.

autoMode // if enabled, will show "auto" in supportedThermostatModes
auxHeatMode
auxMaxOutdoorTemp
auxOutdoorTempAlert
auxOutdoorTempAlertNotify
auxRuntimeAlert
auxRuntimeAlertNotify
auxOutdoorTempAlertNotifyTechnician
auxRuntimeAlertNotifyTechnician
coldTempAlert
coldTempAlertEnabled
compressorProtectionMinTemp
compressorProtectionMinTime
condensationAvoid // deprecated - no longer used by Ecobee
coolMaxTemp
coolMinTemp
coolMode
coolRange
coolRangeHigh
coolRangeLow
coolStages
coolingLockout
coolingSetpointDisplay // internal
coolingSetpointMax
coolingSetpointMin
coolingSetpointTile
currentProgramId // internal
currentProgramOwner // internal
currentProgramType // internal
debugEventFromParent
debugLevel: 2
ecimalPrecision: 1
dehumidifierLevel: 60
dehumidifierMode: off
dehumidifyOvercoolOffset: 2.0 F
dehumidifyWhenHeating: false
dehumidifyWithAC: true
dehumidityLevel: 60
dehumiditySetpoint: 60
disableAlertsOnIdt: false
disableHeatPumpAlerts: false
disablePreCooling: false disablePreHeating: false drAccept: always ecobeeConnected: true eiLocation: electricityBillCycleMonths: 1 electricityBillStartMonth: 1 electricityBillingDayOfMonth: 1 enableElectricityBillAlert: false enableProjectedElectricityBillAlert: false equipmentOperatingState: heat 1 hum equipmentStatus: auxHeat1,fan,humidifier fanControlRequired: true fanMinOnTime: 8 features: Home,HomeKit followMeComfort: false groupName: ChezBurke groupRef: 9023c63a47fff2444152 groupSetting: 1745 hasBoiler: false hasDehumidifier: true hasElectric: false hasErv: false hasForcedAir: true hasHeatPump: false hasHrv: false hasHumidifier: true hasUVFilter: true heatAtSetpoint: 68.5 F heatCoolMinDelta: 4.0 F heatDifferential: 0.5 F heatMaxTemp: 120.0 F heatMinTemp: 45.0 F heatMode: true heatPumpGroundWater: false heatPumpReversalOnCool: true heatRange: (45..78) F heatRangeHigh: 78.0 F heatRangeLow: 45.0 F heatStages: 2 heatingSetpointDisplay: 69.0 F heatingSetpointMax: 78.0 F heatingSetpointMin: 45.0 F heatingSetpointTile: 69.0 F holdAction: nextPeriod holdEndsAt: today at 6:00pm holdStatus: Hold ends today at 6:00pm hotTempAlert: 87.0 hotTempAlertEnabled: true humidifierMode: auto humidityAlertNotify: true humidityAlertNotifyTechnician: false humidityHighAlert: 80 humidityLowAlert: -1 humiditySetpoint: 49 % humiditySetpointDisplay: 49 % identifier: 311019854581 installerCodeRequired: false isRegistered: true isRentalProperty: false isVentilatorTimerOn: false lastHoldType: nextTransition lastModified: 2019-05-29 17:08:51 lastOpState: heating lastPoll: Succeeded lastServiceDate: 2019-07-11 locale: en maxSetBack: 10.0 F maxSetForward: 8.0 F microphoneEnabled: mobile: iOS modelNumber: athenaSmart monthlyElectricityBillLimit: 0 monthsBetweenService: 6 name: Downstairs playbackVolume: programsList: ["Awake", "Away", "Home", "Sleep"] quickSaveSetBack: 4.0 F quickSaveSetForward: 4.0 F randomStartDelayCool: 0 randomStartDelayHeat: 0 remindMeDate: 2020-01-11 schedText: until 6:00pm scheduledProgram: Away scheduledProgramId: away scheduledProgramName: Away scheduledProgramOwner: system scheduledProgramType: program serviceRemindMe: true serviceRemindTechnician: false smartCirculation: false soundAlertVolume: 0 soundTickVolume: 0 stage1CoolingDifferentialTemp: 0.5 F stage1CoolingDissipationTime: 31 stage1HeatingDifferentialTemp: 0.5 F stage1HeatingDissipationTime: 31 statHoldAction: nextPeriod supportedVentModes: tempAlertNotify: true tempAlertNotifyTechnician: false tempCorrection: -1.0 F temperatureDisplay: 68.5° F temperatureScale: F thermostatFanModeDisplay: circulate thermostatHold: hold thermostatOperatingStateDisplay: heating thermostatSetpointMax: 78.0 F thermostatSetpointMin: 45.0 F thermostatStatus: Setpoint updating... thermostatTime: 2019-12-13 12:35:44 timeOfDay: day userAccessCode: userAccessSetting: 0 vent: off ventMode: off ventilatorDehumidify: true ventilatorFreeCooling: true ventilatorMinOnTime: 5 ventilatorMinOnTimeAway: 0 ventilatorMinOnTimeHome: 20 ventilatorOffDateTime: ventilatorType: none voiceEngines: weatherDewpoint: 30.0 F weatherHumidity: 75 % weatherPressure: 30.42 inHg weatherSymbol: 3 weatherTemperature: 37.1 F wifiOfflineAlert: false