SakuraiFang/Ongeki-Con

DIY Controller for ONGEKI

ONGEKI Controller Build

DIY Controller for Ongeki.

TODO

• Add Main pcb files and documentation
• Complete case design

Required parts

• 22AWG wire
• various XH connectors
• various Female Spade Crimp Terminals for buttons
• USB-C breakout board

Raspberry Pi Pico breakout Board (FILES NOT READY)

Documentation in main-PCB.

Wall Attack Device (WAD) sub-assembly

Documentation in WAD assembly.

Swing Mechanism sub-assembly

Documentation in Swing assembly.

Buttons

Rhythm-cons.wiki: Buttons Guide

Main buttons (x6)

• Sanwa OBSA-60UK 60mm Square button
• using Mintyleds
• Links
  • Sanwa Official Store
  • IST 60UK
  • AliExpress: 60mm square arcade button

Menu buttons (x2) (1 Yellow, 1 Red)

• OBSF-24KK YELLOW & RED 24mm square button
• Links
  • Sanwa Official Store
  • AliExpress: 24mm square arcade button

Extra buttons (Test,Service,coin) (x3)

• Sanwa OBSF-24 24mm round buttons
• Links
  • Sanwa Official Store
  • IST 24mm
  • AliExpress: 24mm round arcade button

Case

• mdf / sheet-metal
• Dimensions: 783x295x90mm (WxDxH)

WAD Walls

• mdf / sheet-metal
• T-Nut to attach side wall to Main body
• slide down from top to attach

Control Panel Acrylic

• Dimensions: 669x295mm (WxD)
• 5mm thick
• 3mm chamfers
• 5mm rounded corner

Panel Graphics printing options

• silkscreen printing
• UV printing
• Poster Paper

License

This work is licensed under CC BY-NC-SA 4.0