/chromiumos-overlay-saneyan

The Chromium OS overlay for saneyan dev environment

Primary LanguageShell

chromiumos-overlay-saneyan

This build is based on Chromium OS release-R71-11151.B

The Chromium OS overlay for saneyan dev environment.

  • Iwlwifi support
  • QEMU with KVM, VirtFS and Spice support
  • Plan 9 resource sharing support

Tested devices

  • Thinkpad T480
  • Thinkpad X230

Channels

Installation

(outside) mkdir -p ~/chromiumos
(outside) repo init -u https://chromium.googlesource.com/chromiumos/manifest.git --repo-url https://chromium.googlesource.com/external/repo.git -b release-R71-11151.B
(outside) repo sync -j8

Place the overlay into ~/chromiumos/src/overlays. Make sure the directory name of overlay is overlay-saneyan.

(outside) git clone https://github.com/Saneyan/chromiumos-overlay-saneyan.git overlay-saneyan
mv overlay-saneyan ~/chromiumos/src/overlays

Edit eclass and ebuild

Add saneyan to $ALL_BOARDS list in ~/chromiumos/src/third_party/chromiumos-overlay/eclass/cros-board.eclass so cros can setup and bulid an image for this board.

Licensing

sys-firmware/edk2-ovmf uses BSD license but not BSD-Google. So you must copy the copyright attribution to ~/chromiumos/src/third_party/chromiumos-overlay/licences/copyright-attribution from the overlay.

USE flag

  • kvm: Enable KVM and install qemu package (containing qemu-system-x86_64 command, disabling USB passthrough).

Build

  1. Enter chroot with cros_sdk.
(outside) cros_sdk
  1. This command needs to run once.
(inside) ./setup_board --board=saneyan

  1. Copy package.env and the environment config file to /build/saneyan/etc/portage.

  2. You need to build packages before building an image.

(inside) ./build_packages --board=saneyan
  1. Let's build an image and copy onto a USB drive.
(inside) ./build_image --board=saneyan --noenable_rootfs_verification --boot_args="noinitrd lsm.module_locking=0 disablevmx=off" dev
(inside) cros flash usb:///dev/sdx saneyan/latest

Setup

API Keys

(device) sudo mount -o remount,rw /

# /etc/chrome_dev.conf
GOOGLE_API_KEY=your_api_key
GOOGLE_DEFAULT_CLIENT_ID=your_client_id
GOOGLE_DEFAULT_CLIENT_SECRET=your_client_secret

Reboot your system to apply API keys.

Add IME Engine to Crostini

(penguin) sudo apt install fcitx fcitx-mozc

# /etc/systemd/user/cros-garcon.service.d/cros-garcon-override.conf
Environment="XMODIFIERS=@im=fcitx"
Environment="GTK_IM_MODULE=fcitx"
Environment="QT_IM_MODULE=fcitx"

(penguin) fcitx-autostart

Install Japanese Font

Japanese characters could be text garbling on Linux Apps. Installing Japanese font like IPA font solves this issue.

(penguin) sudo apt install fonts-ipafont

Docker on Crostini (optional)

(penguin) sudo apt install apt-transport-https ca-certificates curl gnupg2 software-properties-common

(penguin) curl -fsSL https://download.docker.com/linux/debian/gpg | sudo apt-key add -
(penguin) sudo apt-key fingerprint 0EBFCD88
(penguin) sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/debian $(lsb_release -cs) stable"

(penguin) sudo apt update && sudo apt install docker-ce

Although Docker would not run with runc, gVisor (runsc) makes Docker run correctly instead.

(penguin) wget https://storage.googleapis.com/gvisor/releases/nightly/latest/runsc
(penguin) wget https://storage.googleapis.com/gvisor/releases/nightly/latest/runsc.sha512
(penguin) sha512sum -c runsc.sha512
(penguin) chmod a+x runsc
(penguin) sudo mv runsc /usr/local/bin

# /etc/docker/daemon.json
{
    "runtimes": {
        "runsc": {
            "path": "/usr/local/bin/runsc"
        }
    }
}

Comment out ExecStartPre to avoid to load overlay kernel module.

# /lib/systemd/system/container
#ExecStartPre=/sbin/modprobe overlay

(penguin) sudo systemctl daemon-reload
(penguin) sudo systemctl restart docker

LXC inside Crostini (optional)

Preparation (for Debian)
(crosh) vmc start termina

(termina) lxc launch images:debian/9 my-container

(termina) lxc storage volume create default shared-volume

(termina) lxc storage volume attach default shared-volume my-container data /data
(termina) lxc storage volume attach default shared-volume penguin data /data

Virtual Machine with QEMU (optional)

Add the kvm_intel module to Linux kernel and check installation with lsmod.

(device) sudo modprobe kvm_intel
(device) lsmod | grep kvm_intel # You will see it.
Preparation (for Alpine)

Download Alpine Linux ISO and setup disk image and virtual machine. Note that Alpine Linux should be built with vanilla kernel so that Docker can store new images.

  1. Create QEMU image formatted in qcow2
(device) qemu-img create -f qcow2 alpine.img 20G
  1. Start virtual machine with ISO file to install Alpine Linux.
(device) qemu-system-x86_64 -daemonize -enable-kvm -m 2048M -drive index=0,media=disk,if=virtio,file=alpine.img -netdev type=user,id=alpnet -device virtio-net-pci,netdev=alpnet -localtime -cdrom alpine.iso
  1. Install Alpine Linux and restart virtual machine to boot from the image file.
(vm) setup-alpine
(vm) poweroff -f
(device) qemu-system-x86_64 -daemonize -enable-kvm -m 2048M -drive index=0,media=disk,if=virtio,file=alpine.img -netdev type=user,id=alpnet,hostfwd=tcp::22-:22 -device virtio-net-pci,netdev=alpnet -localtime

You can connect to this virtual machine with VNC Viewer for Google Chrome or SSH.

Optional

This overlay enables QEMU to use VirtFS. It means you can share files between host and guest using 9p virtio as the transport.

  1. Create a directory in home.
(device) mkdir ~/hostshare
  1. Start virtual machine with additional options.
(device) qemu-system-x86_64 -daemonize -enable-kvm -m 2048M -drive index=0,media=disk,if=virtio,file=alpine.img -netdev type=user,id=alpnet,hostfwd=tcp::22-:22 -device virtio-net-pci,netdev=alpnet -localtime -fsdev local,security_model=passthrough,id=fsdev0,path=/home/chronos/user/hostshare -device virtio-9p-pci,id=fs0,fsdev=fsdev0,mount_tag=hostshare
  1. Create a user which UID and GID are same as host's IDs.
(vm) adduser saneyan
  1. Mount the 9p filesystem from the host using 9p virtio.
(vm) mkdir /home/saneyan/hostshare
(vm) mount -t 9p -o trans=virtio,version=9p2000.L,rw hostshare /home/saneyan/hostshare

Now you can write or read files from either host or guest.

Update kernel.config

When the target kernel version is 4.14:

(inside) cros_workon --board=saneyan start sys-kernel/chromeos-kernel-4_14
(inside) cd ~/trunk/src/third_party/kernel/v4.14
# Use kernelconfig to customize your kernel configs.
(inside) ./chromeos/scripts/kernelconfig editconfig
(inside) ./chromeos/scripts/prepareconfig chromiumos-x86_64
(inside) cp .config ~/trunk/src/overlays/overlay-saneyan/kernel.config
(inside) cros_workon --board=saneyan stop sys-kernel/chromeos-kernel-4_14

If you already execute setup_board, re-execute the command with --force option.

(inside) ./setup_board --board=saneyan --force

References