/Flash-firmware---ESP-01

Flash firmware on ESP-01 module using arduino uno in a simple way

Primary LanguageC++

Flash-firmware---ESP-01

#STEP-1 -->Do the following connection without ATMEGA328 IC and connect the arduino uno with your laptop/pc img

#STEP-2 -->Download ESP8266 Flasher and firmware -->Install and open the flasher select the the firmware.bin file -->Check your COM port and change it -->Now Flash it by clicking download button in the ESP8266 flasher

#STEP-3 -->Once the flashing over remove the connection and follow the below circuit , connect the arduino uno with your laptop #NOTE:WITH ATMEGA328 IC img

#STEP-4 --Set the baud rate by uploading the arduino code (wifiesp-setbaudrate.ino)