Pinned Repositories
ampy
Adafruit MicroPython Tool - Utility to interact with a MicroPython board over a serial connection.
basement_fan
Ventilation fan in the basement should turn on every now and then to keep air fresh and decrease humidity level.
can042
CAN bus on NUCLEO F042
candleLight_fw
gs_usb compatible firmware for candleLight, cantact and canable
canmulator
A simple tool to send a bunch of CAN frames from Wireshark dump.
HackLab-reader
RFID NFC Reader for HackLab equipment and assets access
lcd_i2c
This is just a simplified copy-paste from the project [python_lcd](https://github.com/dhylands/python_lcd) which is intended to be used with ESP32 (esp8266) modules.
pelican
A simple wrapper to send and receive CAN frames with micropython board and MCP2515.
SmartHomeBot
This is the implementation of my vision of smart home bot
teleintercom
The Telegram bot which opens the house door
Sashkoiv's Repositories
Sashkoiv/pelican
A simple wrapper to send and receive CAN frames with micropython board and MCP2515.
Sashkoiv/candleLight_fw
gs_usb compatible firmware for candleLight, cantact and canable
Sashkoiv/canmulator
A simple tool to send a bunch of CAN frames from Wireshark dump.
Sashkoiv/HackLab-reader
RFID NFC Reader for HackLab equipment and assets access
Sashkoiv/lcd_i2c
This is just a simplified copy-paste from the project [python_lcd](https://github.com/dhylands/python_lcd) which is intended to be used with ESP32 (esp8266) modules.
Sashkoiv/ampy
Adafruit MicroPython Tool - Utility to interact with a MicroPython board over a serial connection.
Sashkoiv/basement_fan
Ventilation fan in the basement should turn on every now and then to keep air fresh and decrease humidity level.
Sashkoiv/can042
CAN bus on NUCLEO F042
Sashkoiv/can_around
Play around with CAN bus using micropython and MCP chips on ESP modules
Sashkoiv/coursera-c-plus-plus-modern-development
Coursera specialization, partners MIPT, Yandex. The art of modern C++development (Искусство разработки на современном C++).
Sashkoiv/gl_kernel_procamp_2021
Linux kernel general course by GlobalLogic, Autumn 2021
Sashkoiv/Haklab-kitchen
Sashkoiv/home-automation
Simple home automation sandbox
Sashkoiv/joy-mouse
Joystic Mouse on STM32F103C8 BluePill
Sashkoiv/knight_rider_pumpkin
Sashkoiv/luxmeter
Simple device to measure light level
Sashkoiv/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
Sashkoiv/micropython
MicroPython - a lean and efficient Python implementation for microcontrollers and constrained systems
Sashkoiv/MillingLight
Sashkoiv/models_2d
a collection of my 2D models
Sashkoiv/moto32
Moto turn and stop signal
Sashkoiv/mycalc
Sashkoiv/ODriveHardware
High performance motor control
Sashkoiv/pycar
Python script for RC car control
Sashkoiv/RoboSanta
Answer the questionnaire and get a candy!
Sashkoiv/stm32-cmake-cpp-sandbox
Sashkoiv/Valve-relay
A simple additional relay board to use ball valve servo with Xiaomi Aqara Relay
Sashkoiv/ventivalve
The medical ventilator valve controller.
Sashkoiv/wcast
Parser for weather forecast web service.
Sashkoiv/yandex-cpp-belts
Coursera Yandex C++ course tasks and solutions