During this course, you will work on various assignments as you learn to code. All assignments will be interactive pieces of curriculum that require some work. Some assignments may ask you to follow a set of instructions, while others will ask you to figure out your own solution to pass specific tests. This lesson is your first assignment!
All assignments are hosted on GitHub. In order to work on them, however, you will need to complete work on your local machine. The general process is:
- Go to the assignment's GitHub page
- Create a personal copy (a 'fork') of the assignment
- Download your personal copy (referred to as 'cloning') to your environment
- Complete the required work
- Upload the work you've done to your personal copy of the assignment on GitHub
For this assignment, we'll do a quick walkthrough of these steps so you will know what to do in future assignments.
Through this course, you will be downloading many assignments, so it is important to take a moment now to think about how you'll organize this work on your computer. You are welcome to do what you like, but we recommend setting up a directory where you can keep all of your work for this course.
- Go to your terminal and navigate to your home directory by typing
cd ~
- Create a
Development
folder by typingmkdir Development
(if you're a mac user, this folder already exists) - Navigate into this folder with
cd Development
- In here, create a
code
folder withmkdir code
- Navigate into this folder with
cd code
You'll be going through multiple phases in this course, so it may also be
helpful to go one step further and create folders for phases 0 through 5 within
code
.
Having a specific place for your work will make it easier to find if you ever need to look back at an earlier project. It'll also keep the rest of your computer's folders clear of random code.
Note: The process we'll go through in this lesson will create sub-folders automatically. Whenever you are starting a new assignment, navigate back to your main
code
folder (cd ~/Development/code
) to ensure these sub-folders don't get created within each other.
All the lessons in this course have a corresponding repository in GitHub. On this page in Canvas, you should see three icons in the upper right corner. The first says Fork. The second is a button that looks like a large-headed cat (GitHub's 'Octocat' icon); this button will open the lesson's GitHub repo without forking. The third is a flag, which you can use to submit an issue for the lesson (e.g., if you find a typo or other error).
One way to fork an assignment is to click the Octocat button to go to the assignment's GitHub repo and fork directly from that page. (We'll go through that process in a later lesson.) However, the easiest way to fork the assignment is by clicking the Fork button. Either method will work, but we recommend you use the Fork button because it will automate some assignment steps for you when you get a bit farther along in the curriculum.
This is just a picture, the button is up at the top of the pageClicking the Fork button will do one of two things — it will either start the forking process or bring you to a page where you select where to create your fork. If you're prompted to choose, select your personal GitHub account. The forking process will begin and may take a few moments. When complete, you will be redirected to a new copy of the assignment that exists under your GitHub account.
Forking is a process which creates an exact copy of a collection of code and files. Once you've created a fork on your own GitHub account, you will be able to edit the files in the repository and write your own code solution without interfering with the original copy.
Go ahead and fork this assignment. The README.md
file in the repository
contains these instructions, so you can continue here or in GitHub.
With a fork created, the next step is to download your new repository to your local machine.
To download the repository for this lesson, on your personal GitHub fork, first
click the Code button. A pop-up will appear that says Clone with HTTPS.
You'll see a URL provided starting with https://...
.
Before doing anything else, make sure to switch from HTTPS to SSH by
clicking the Use SSH link. When clicked, the pop-up will change to display
Clone with SSH. Instead of a URL, you'll see what sort of looks like an
email, starting with git@github.com:
. You should see your GitHub name after
the :
.
Aside: Why SSH? If you followed the setup instructions, you have added your personal SSH key to GitHub. GitHub will store your personal copies of all the work you do in this course. Because you've added your SSH key, GitHub will know who you are when you send work from your local machine to GitHub to be stored. Using HTTPS instead would require you to sign in from your terminal using your log-in credentials each time you try to push your code to GitHub; it also may not work at all for some assignments.
From here, click the clipboard icon.
Now, open your terminal and navigate to where you'd like to download the
assignment (e.g. cd ~/Development/code
). Type git clone
then paste in the
copied SSH link from GitHub. It should look something like this:
git clone git@github.com:<your-user-name>/phase-0-completing-assignments.git
Press enter, and you should see a flurry of terminal activity. Once the terminal gives you control to type again, a new folder with the GitHub name of the assignment will be present. Change directory into this folder to access the assignment files.
cd phase-0-completing-assignments
Now, if you've set up VS Code, type code .
to open up a text editor window
with access to all of the assignment's files. The instructions are now also
available on your local machine in README.md
.
Most assignments will have tests that check your work and provide immediate feedback in the terminal. We'll walk through some examples in upcoming lessons.
This assignment has a single test: check to see if you've correctly cloned this assignment to your local machine. If you've followed the steps above, you've completed everything you need to do to pass the test; all that is left to do is run it.
To run an assignment's tests, first you'll need to set up the tools used to run the test. Fortunately, all the tools required are included as part of the assignment, so all you need to do is type the following:
npm install
This command will again cause a flurry of activity in your terminal. You may see some warnings in the mix of output, but that is normal. After a few moments, you should see some messaging about packages being added and regain control of the command line. You're now ready to run this assignment's tests. Type the following to do so:
npm test
You should see the test results print out. For this assignment, they'll look like this:
This assignment
✓ has been correctly cloned to your local environment
1 passing (5ms)
Congratulations! You've passed this assignment's test.
Note: If you did not receive a passing test, or if your terminal produced some sort of error, walk through the steps in this lesson again and make sure you've followed each one. If you're still receiving errors, we recommend going back through the local environment setup instructions again to ensure everything is set up properly.
When all tests are passing, the next step is to upload your work. To do this, we
run three commands in the terminal. First, type the following, then press
<Enter>
:
git add .
This 'stages' any work you've done (changes to your local copy of an assignment) so it will be ready to upload.
Second, we create a record of these changes that includes a message describing
the change. Type the following, then press <Enter>
:
git commit -m 'Done with assignment'
This is known as creating a 'commit.' A commit preserves all staged changes from the previous command. Any work you've done is now recorded as part of your copy of the assignment. This copy, however, is still only on your local environment.
To upload your completed assignment, there is one final command to run. Type the
following, then press <Enter>
:
git push
This command sends the changes you've made to GitHub. If you revisit your personal copy of the assignment on GitHub, the commit you just created (with the message 'Done with assignment') will be the most recent commit on the assignment.
Each assignment will be slightly different and will include instructions on what
is required to complete it. Depending on the testing tools in an assignment, the
specific commands may change. For this lesson, we ran npm install
and npm test
: npm install
to set up the necessary tools, and npm test
to run the
actual test.
You'll also see some assignments that ask you to run bundle
and rspec
—
bundle
, like npm install
, will set up necessary tools and rspec
will run
the tests. We'll include instructions indicating which commands to run. In all
cases, you can run the tests as many times as you would like. Some labs will
have many tests and may require running the tests many times while you solve
them.
To register completion of an assignment in Canvas, you must submit a link to your GitHub repository.
-
After pushing your code up following the previous steps, go to your repository and copy the URL link in the browser's URL bar.
-
In Canvas, navigate to the assignment you've been working on. In the upper right corner of the assignment, you should see a Submit Assignment button. You'll be directed to the bottom of the page, where you can provide a URL as your submission.
-
Paste in your repository's GitHub URL and click Submit.
Canvas will indicate a successful submission and refresh the page. In the Modules view of your course, you should now see a checkmark next to the assignment, indicating a successful submission.
Let's quickly review the process for completing assignments:
-
Create a personal fork of the GitHub assignment by clicking the Fork button in the upper right corner of the assignment on Canvas.
-
Once forked to your personal account, start the cloning for your assignment. Do this by clicking the Code button in GitHub, choosing SSH, then clicking the clipboard icon to copy the assignment's GitHub info.
-
Go to your local environment's terminal and navigate to where you'd like to store your assignment locally.
-
Type
git clone
, then paste in what you copied from GitHub. This will create a copy on your local machine. -
Navigate into the new cloned assignment and complete any work required
-
Install testing tools with
npm install
(orbundle
if tests use Ruby) -
Run tests with
npm test
(orrspec
for Ruby) -
If all tests are passing, stage and commit your solution with the following commands
git add .
git commit -m 'Done with assignment'
-
Push your work to your personal fork on GitHub with the
git push
command -
Go to your repository in GitHub and copy the URL. Note, this should be copied from the browser's address bar, and should start with
https://github.com/
-
Go to the assignment in Canvas and click Submit Assignment
-
Paste in your GitHub URL as your submission
Congratulations! You've completed your first assignment! You now know how to work on and submit assignments. We'll remind you of this process in upcoming lessons, but we recommend bookmarking this lesson so you can refer back here in case you forget. Equipped with this knowledge, you are now ready to tackle greater challenges!