CasparCG Server 2.0.7 Beta 2 ============================ Thank you for your interest in CasparCG Server, a professional software used to play out and record professional graphics, audio and video to multiple outputs. It has been in 24/7 broadcast production since 2006. This release is NOT considered tested and stable, and it is NOT intended for use in professional production. Please use CasparCG Server 2.0.6 if you need proven stability! More information is available at http://casparcg.com/ SYSTEM REQUIREMENTS ------------------- 1. Intel processor capable of using SSSE3 instructions. Please refer to http://en.wikipedia.org/wiki/SSSE3 for a complete list. While AMD processors probably work, CasparCG Server has only been tested on Intel processors. 2. Windows 7 (64-bit) strongly recommended. CasparCG Server has also been used successfully on Windows 7 (32-bit) and Windows XP SP2 (32-bit only.) NOT SUPPORTED: Windows 8, Windows 2003 Server and Windows Vista. 3. A graphics card (GPU) capable of OpenGL 3.0 is required. We strongly recommend that you use a separate graphics card, and avoid using the built-in GPU that exists in many CPUs, since your performance will suffer. 4. Microsoft Visual C++ 2010 Redistributable Package must be installed. See link in the Installation section below. 5. Microsoft .NET Framework 4.0 or later must be installed. See link in the Installation section below. 6. Windows' "Aero" theme and "ClearType" font smoothing must be disabled as they have been known to interfere with transparency in Flash templates, and can also cause problems with Vsync when outputting to computer screens. The latest system recommendations are available at: http://casparcg.com/wiki/CasparCG_Server#System_Requirements INSTALLATION ------------ 1. Check that your system meets the requirements above. 2. Unzip and place the "CasparCG Server 2.0.7 Beta 2" folder anywhere you like. 3. Install "Microsoft Visual C++ 2010 Redistributable Package" from http://www.microsoft.com/download/en/details.aspx?id=5555 4. Install "Microsoft .NET Framework" (version 4.0 or later) from http://go.microsoft.com/fwlink/?LinkId=225702 5. Make sure you turn off Windows' "Aero Theme" and "ClearType" font smoothing as they can interfere with CasparCG Server's OpenGL features! INSTALLATION OF ADDITIONAL NON-GPL SOFTWARE ------------------------------------------- - For Flash template support: 1. Uninstall any previous version of the Adobe Flash Player using this file: http://download.macromedia.com/get/flashplayer/current/support/uninstall_flash_player.exe 2. Download and unpack http://download.macromedia.com/pub/flashplayer/installers/archive/fp_11.8.800.94_archive.zip 3. Install Adobe Flash Player 11.8.800.94 from the unpacked archive: fp_11.8.800.94_archive\11_8_r800_94\flashplayer11_8r800_94_winax.exe - For NewTek iVGA support, please download and install the following driver: http://new.tk/NetworkSendRedist CONFIGURATION ------------- 1. Start the "CasparCG_Server.exe" program and configure the settings. Then Click the "Restart" button to save the configuration and restart the CasparCG Server software. 2. Connect to the Server from a client software, such as the "CasparCG Client" which is available as a separate download. DOCUMENTATION ------------- The most up-to-date documentation is always available at http://casparcg.com/wiki/ Ask questions in the forum: http://casparcg.com/forum/ LICENSING --------- CasparCG is distributed under the GNU General Public License GPLv3 or higher, please see LICENSE.TXT for details. The included software is provided as-is by Sveriges Televison AB. More information is available at http://casparcg.com/
ScarlettCode/Server
CasparCG Server is a Windows software used to play out professional graphics, audio and video to multiple outputs. It has been in 24/7 broadcast production since 2006. Ready-to-use downloads are available at the official site.
C++GPL-3.0