Schnitzel/hass-miner

It is impossible to add more than 1 miner

Closed this issue · 13 comments

iRobot39 commented

Good afternoon! I encountered a problem, I can only add 1 miner, adding 2-3-4 miners is possible but they are not active. There is also no power control button for the miner. Am I doing something wrong? Antminer T19 S19 firmware Vnish 1.21
Uploading IMG_4782.jpeg…

b-rowan commented

That image isn't loading, but no power control was a bug with pyasic, I fixed that with 1.1.4 if you update to the latest.

Regarding the adding multiple miners issue, I'm not really sure how HASS handles device IDs, but sometimes it just decides to be weird, try removing your miners, updating the integration, then re-adding them.

iRobot39 commented

Thanks for your reply. the new version did add a Manera switch, but the problem with adding more than one Miner remained. Vnish firmware lacks SSH access :(.
The problem looks like this: I calmly add the first Miner by IP address, receive all the information in full from it, when adding Miner number two I only receive information from two coolers, when adding Miner number three or four and so on I do not receive no information about the lane. As soon as I remove Miner number one from the profile, Miner number two immediately receives all the information, number three receives information about the coolers. I can't figure out what the reason is. I can record and send a video.

b-rowan commented

Logs would be helpful if you can get them please. It's likely the logs say something like this: "Platform 'miner' does not generate unique IDs", so it may be an issue with how the IDs are generated, it's likely grabbing "None" some some important piece of the ID and that's what's causing it.

iRobot39 commented
Nickfost commented

I'm experiencing similar issues,

unsure if its vnish, pyasic, ha , or hass-miner

I'm unable to get more than one vnish machine working per installation of ha

iRobot39 commented

oh yes my friend! this problem does not disappear even on string firmware, I have already tried everything and abandoned this idea. :(

  • 😕2
b-rowan commented

I've been so busy recently I haven't had a chance to look at it. @Nickfost we should link up for a c all and ill see if I can fix this.

b-rowan commented

Pushed a fix to pyasic with the latest version 1.1.5 that should fix this? It wasnt getting the MAC address.

Nickfost commented

@iRobot39 yo @b-rowan just fixed this i have 3 miners with vnish with 20 entities each like expected

iRobot39 commented
iRobot39 commented
b-rowan commented

Try re-adding your miners from scratch.

iRobot39 commented