/seeed-linux-dtoverlays

Device Tree Overlays for Seeed boards

Primary LanguageCOtherNOASSERTION

seeed-linux-dtoverlays

On embedded systems, the Device Tree helps the kernel understand various peripherals that are connected to the board and how to initialize them. These hardware might be things like LDO regulators, various controllers, GPIO, etc which are generic, but yet needs certain configuration that should not be hard-coded into the kernel. To understand more about device trees I recommend you start with the Raspberry Pi documentation on this topic. There are more links at the end of this article.

Overlays:

Step 1: Clone this repo:

git clone https://github.com/Seeed-Studio/seeed-linux-dtoverlays
cd seeed-linux-dtoverlays

Step 2: Compile the code

#Select platform by replacing word <platform> to
#one of {jetsonnano bb stm32mp1 rpi imx6ull}.
#On iMx6ull-NPI
make all_imx6ull
#on RPI
make all_rpi
#On beagleboard
make all_bb
#On JetsonNano
make all_jetsonnano

Step 3: Install *.dtbo:

#On iMx6ull-NPI
sudo make install_imx6ull
#on RPI
sudo make install_rpi
#On beagleboard
sudo make install_bb
#On JetsonNano
sudo make install_jetsonnano

more:

@echo "Targets:"
@echo "  all_<PLATFORM>:            Build all device tree binaries for <PLATFORM>"
@echo "  clean_<PLATFORM>:          Clean all generated files for <PLATFORM>"
@echo "  install_<PLATFORM>:        Install all generated files for <PLATFORM> (sudo)"
@echo ""
@echo "  overlays/<PLATFORM>/<DTS>.dtbo   Build a single device tree binary"
@echo ""
@echo "PLATFORMES: jetsonnano bb stm32mp1 rpi imx6ull"

Further Reading

Modules:

Mainline does not have a kernel module, or there is controversy about a kernel module that does work well. We will also collect them together and put them here. The kernel modules will have the corresponding documentation and detailed instructions。