/FlipperZero-WiFi-Scanner_Module

WiFi Scanner Module for FlipperZero based on ESP8266/ESP32

Primary LanguageCApache License 2.0Apache-2.0

(WIP)

Supports FlipperZero's Dev Board v.1

FlipperZero WiFi Scanner Module

WiFi Scanner Module for FlipperZero based on ESP8266/ESP32 (results with ESP8266 much better than with ESP32)

This module will help you in finding specific access point physical location.

Work demonstration

IMAGE ALT TEXT HERE

Proto WiFi scanner module

Controls

On scan page:

  • UP - move list up by one
  • DOWN - move list down by one
  • OK (short press) - enter monitor mode
  • OK (long press) - scan again
  • BACK - exit app

In monitor mode:

  • OK (long press) - scan again
  • BACK (short press) - return to scan page and scan again
  • BACK (long press) - exit app

Help project

Feel free to contact me with your proposals and improvements to this projects.

Fork and improve!

Donate if you want to support author ua

SUPPORT

What do you need

  1. Wemos D1 Mini (or Mini Pro) or analog
  2. FlipperZero

How to

FlipperZero's Dev Board v.1

Flash firmware for Dev Board and firmware for FlipperZero from latest release

How To Flash .bin to ESP

How To Update FlipperZero firmware (choose Install from file)

DIY Module

Precompiled .bin for ESP and firmware for FlipperZero can be found in latest release

Flash ESP in you web browser

or

How To Flash .bin to ESP

How To Update FlipperZero firmware (choose Install from file)

Or compile firmwares on your own

Compile and flash firmware on Wemos D1 Mini

Install EPS8266 board version 2.7.4 for Arduino IDE. I had issues with higher versions.

Compile firmware for FlipperZero with new application

Use next schematics to solder the WiFi Scanner board for FlipperZero

image

How to add new application on FlipperZero

  1. Copy folders and paste directly into root folder of original firmware.
  2. Add new applications category in /fbt_options.py my_apps for example
FIRMWARE_APPS = {
    "default": (
        "crypto_start",
        # Svc
        "basic_services",
        # Apps
        "basic_apps",
        "updater_app",
        "archive",
        
        # My Apps
        "my_apps",
        
        # Settings
        "passport",
        "system_settings",
        "about",
        # Plugins
        "basic_plugins",
        # Debug
        "debug_apps",
    ),
    "unit_tests": (
        "basic_services",
        "unit_tests",
    ),
}
  1. Add new apps category and our app into applications/meta/application.fam
App(
    appid="my_apps",
    name="My applications for main menu",
    apptype=FlipperAppType.METAPACKAGE,
    provides=[
        "wifi_scanner",
    ],
)
  1. Compile with any method provided by FlipperZero dev team

Issues

I tested all the things on a test bench with Wemos D1 and all was good. When I soldered protoboard with Wemos D1 mini pro I started to receive exceptions. It seems for some reason Wemos D1 mini doesn't run well on FlipperZero 5V. To fast solve the issue I've added an AMS1117 voltage regulator on 5V to drop it to 3V3 and feed the module.

image