/NodeMCURechargeCard

Using NodeMCU (base on ESP8266) and RC522 to recharge your Mifare Class 1K card.

Primary LanguagePythonMIT LicenseMIT

NodeMCURechargeCard

使用基于 ESP8266 的 NodeMCU 及 RC522 对 Mifare Class 1K 卡片充值
Using NodeMCU (base on ESP8266) and RC522 to recharge your Mifare Class 1K card

####依赖 dependence

使用方法 Usage

  1. 上载脚本 Upload scripts

ampy --port COM5 put mfrc522.py mfrc522.py ampy --port COM5 put charge_card.py charge_card.py

  1. 运行脚本 Run script

import charge_card.py

其他 Others

注意：脚本运行后将读取并修改 charge_card.py 中第六行所标记的区块的前两个字节共 16 位。读写使用的该扇区 KeyA 位于 charge_card.py 中第七行。
Note: After the script is run, it will read and modify the first two bytes of the block marked by the sixth line in charge_card.py. The sector used to read and write KeyA is located in the seventh line of charge_card.py.