/Automatic-Targeting-System-using-opencv-python

Primary LanguageC++MIT LicenseMIT

Automatic-Targeting-System-using-opencv-python

Steps to setup

  1. Clone this repository
  2. Download this application from playstore: https://play.google.com/store/apps/details?id=com.pas.webcam&hl=en
  3. Connect the LASER to pin D0 (GPIO16) and GND
  4. Open wifi_led.ino in a editor and mention the wifi ssid and password
  5. Upload the wifi_led.ino file to node mcu
  6. open the android application you have installed from playstore.
  7. Scroll down below and click on start server
  8. open the main.py file in idle and mention the ip shown in the application (check notes below)
  9. Now run the main.py file and Enjoy.

Notes

  1. You may download any ip camera application. Any app may work which have proper address specified. Note this address carefully. We need it at step 8.
  2. There are lots of way to test it. There is a test.mp4 video which you can use for testing.
  3. If you find any issue or bug raise an issue. If you like my work put a star.

ALL SET