/ROCm

ROCm - Open Source Platform for HPC and Ultrascale GPU Computing

New AMD ROCm Information Portal ROCm v4.5 and Above

Beginning ROCm release v5.0, AMD ROCm documentation has a new portal at https://docs.amd.com This portal consists of ROCm documentation v4.5 and above.

For documentation prior to ROCm v4.5, you may continue to access https://rocmdocs.amd.com.

AMD ROCm™ V5.1.1 Release

AMD ROCm v5.1.1 is now released. The release documentation is available at https://docs.amd.com.

AMD ROCm™ V5.1 Release

AMD ROCm v5.1 is now released. The release documentation is available at https://docs.amd.com.

AMD ROCm™ v5.0.2 Release Notes

Fixed Defects in This Release

The following defects are fixed in the ROCm v5.0.2 release.

Issue with hostcall Facility in HIP Runtime

In ROCm v5.0, when using the “assert()” call in a HIP kernel, the compiler may sometimes fail to emit kernel metadata related to the hostcall facility, which results in incomplete initialization of the hostcall facility in the HIP runtime. This can cause the HIP kernel to crash when it attempts to execute the “assert()” call. The root cause was an incorrect check in the compiler to determine whether the hostcall facility is required by the kernel. This is fixed in the ROCm v5.0.2 release. The resolution includes a compiler change, which emits the required metadata by default, unless the compiler can prove that the hostcall facility is not required by the kernel. This ensures that the “assert()” call never fails.

Note: This fix may lead to breakage in some OpenMP offload use cases, which use print inside a target region and result in an abort in device code. The issue will be fixed in a future release.

Compatibility Matrix Updates to ROCm Deep Learning Guide

The compatibility matrix in the AMD Deep Learning Guide is updated for ROCm v5.0.2.

For more information and documentation updates, refer to https://docs.amd.com.

AMD ROCm™ v5.0.1 Release Notes

Deprecations and Warnings

Refactor of HIPCC/HIPCONFIG

In prior ROCm releases, by default, the hipcc/hipconfig Perl scripts were used to identify and set target compiler options, target platform, compiler, and runtime appropriately. In ROCm v5.0.1, hipcc.bin and hipconfig.bin have been added as the compiled binary implementations of the hipcc and hipconfig. These new binaries are currently a work-in-progress, considered, and marked as experimental. ROCm plans to fully transition to hipcc.bin and hipconfig.bin in the a future ROCm release. The existing hipcc and hipconfig Perl scripts are renamed to hipcc.pl and hipconfig.pl respectively. New top-level hipcc and hipconfig Perl scripts are created, which can switch between the Perl script or the compiled binary based on the environment variable HIPCC_USE_PERL_SCRIPT. In ROCm 5.0.1, by default, this environment variable is set to use hipcc and hipconfig through the Perl scripts. Subsequently, Perl scripts will no longer be available in ROCm in a future release.

ROCM DOCUMENTATION UPDATES FOR ROCM 5.0.1

  • ROCm Downloads Guide

  • ROCm Installation Guide

  • ROCm Release Notes

For more information, see https://docs.amd.com.

AMD ROCm™ v5.0 Release Notes

ROCm Installation Updates

This document describes the features, fixed issues, and information about downloading and installing the AMD ROCm™ software.

It also covers known issues and deprecations in this release.

Notice for Open-source and Closed-source ROCm Repositories in Future Releases

To make a distinction between open-source and closed-source components, all ROCm repositories will consist of sub-folders in future releases.

  • All open-source components will be placed in the base-url/<rocm-ver>/main sub-folder
  • All closed-source components will reside in the base-url/<rocm-ver>/proprietary sub-folder

List of Supported Operating Systems

The AMD ROCm platform supports the following operating systems:

OS-Version (64-bit) Kernel Versions
CentOS 8.3 4.18.0-193.el8
CentOS 7.9 3.10.0-1127
RHEL 8.5 4.18.0-348.7.1.el8_5.x86_64
RHEL 8.4 4.18.0-305.el8.x86_64
RHEL 7.9 3.10.0-1160.6.1.el7
SLES 15 SP3 5.3.18-59.16-default
Ubuntu 20.04.3 5.8.0 LTS / 5.11 HWE
Ubuntu 18.04.5 [5.4 HWE kernel] 5.4.0-71-generic

Support for RHEL v8.5

This release extends support for RHEL v8.5.

Supported GPUs

Radeon Pro V620 and W6800 Workstation GPUs

This release extends ROCm support for Radeon Pro V620 and W6800 Workstation GPUs.

  • SRIOV virtualization support for Radeon Pro V620
  • KVM Hypervisor (1VF support only) on Ubuntu Host OS with Ubuntu, CentOs, and RHEL Guest
  • Support for ROCm-SMI in an SRIOV environment. For more details, refer to the ROCm SMI API documentation.

Note: Radeon Pro v620 is not supported on SLES.

ROCm Installation Updates for ROCm v5.0

This release has the following ROCm installation enhancements.

Support for Kernel Mode Driver

In this release, users can install the kernel-mode driver using the Installer method. Some of the ROCm-specific use cases that the installer currently supports are:

  • OpenCL (ROCr/KFD based) runtime
  • HIP runtimes
  • ROCm libraries and applications
  • ROCm Compiler and device libraries
  • ROCr runtime and thunk
  • Kernel-mode driver

Support for Multi-version ROCm Installation and Uninstallation

Users now can install multiple ROCm releases simultaneously on a system using the newly introduced installer script and package manager install mechanism.

Users can also uninstall multi-version ROCm releases using the amdgpu-uninstall script and package manager.

Support for Updating Information on Local Repositories

In this release, the amdgpu-install script automates the process of updating local repository information before proceeding to ROCm installation.

Support for Release Upgrades

Users can now upgrade the existing ROCm installation to specific or latest ROCm releases.

For more details, refer to the AMD ROCm Installation Guide v5.0.

AMD ROCm V5.0 Documentation Updates

New AMD ROCm Information Portal – ROCm v4.5 and Above

Beginning ROCm release v5.0, AMD ROCm documentation has a new portal at https://docs.amd.com. This portal consists of ROCm documentation v4.5 and above.

For documentation prior to ROCm v4.5, you may continue to access https://rocmdocs.amd.com.

Documentation Updates for ROCm 5.0

Deployment Tools

ROCm Data Center Tool Documentation Updates

  • ROCm Data Center Tool User Guide
  • ROCm Data Center Tool API Guide

ROCm System Management Interface Updates

  • System Management Interface Guide
  • System Management Interface API Guide

ROCm Command Line Interface Updates

  • Command Line Interface Guide

Machine Learning/AI Documentation Updates

  • Deep Learning Guide
  • MIGraphX API Guide
  • MIOpen API Guide
  • MIVisionX API Guide

ROCm Libraries Documentation Updates

  • hipSOLVER User Guide
  • RCCL User Guide
  • rocALUTION User Guide
  • rocBLAS User Guide
  • rocFFT User Guide
  • rocRAND User Guide
  • rocSOLVER User Guide
  • rocSPARSE User Guide
  • rocThrust User Guide

Compilers and Tools

ROCDebugger Documentation Updates

  • ROCDebugger User Guide
  • ROCDebugger API Guide

ROCTracer

  • ROCTracer User Guide
  • ROCTracer API Guide

Compilers

  • AMD Instinct High Performance Computing and Tuning Guide
  • AMD Compiler Reference Guide

HIPify Documentation

  • HIPify User Guide
  • HIP Supported CUDA API Reference Guide

ROCm Debug Agent

  • ROCm Debug Agent Guide
  • System Level Debug Guide
  • ROCm Validation Suite

Programming Models Documentation

HIP Documentation

  • HIP Programming Guide
  • HIP API Guide
  • HIP FAQ Guide

OpenMP Documentation

  • OpenMP Support Guide

ROCm Glossary

  • ROCm Glossary – Terms and Definitions

AMD ROCm Legacy Documentation Links – ROCm v4.3 and Prior

  • For AMD ROCm documentation, see

https://rocmdocs.amd.com/en/latest/

  • For installation instructions on supported platforms, see

https://rocmdocs.amd.com/en/latest/Installation_Guide/Installation-Guide.html

  • For AMD ROCm binary structure, see

https://rocmdocs.amd.com/en/latest/Installation_Guide/Software-Stack-for-AMD-GPU.html

  • For AMD ROCm release history, see

https://rocmdocs.amd.com/en/latest/Current_Release_Notes/ROCm-Version-History.html

What's New in This Release

HIP Enhancements

The ROCm v5.0 release consists of the following HIP enhancements.

HIP Installation Guide Updates

The HIP Installation Guide is updated to include building HIP from source on the NVIDIA platform.

Refer to the HIP Installation Guide v5.0 for more details.

Managed Memory Allocation

Managed memory, including the __managed__ keyword, is now supported in the HIP combined host/device compilation. Through unified memory allocation, managed memory allows data to be shared and accessible to both the CPU and GPU using a single pointer. The allocation is managed by the AMD GPU driver using the Linux Heterogeneous Memory Management (HMM) mechanism. The user can call managed memory API hipMallocManaged to allocate a large chunk of HMM memory, execute kernels on a device, and fetch data between the host and device as needed.

Note: In a HIP application, it is recommended to do a capability check before calling the managed memory APIs. For example,

int managed_memory = 0;
HIPCHECK(hipDeviceGetAttribute(&managed_memory, hipDeviceAttributeManagedMemory, p_gpuDevice));

if (!managed_memory) {
  printf ("info: managed memory access not supported on the device %d\n Skipped\n", p_gpuDevice);
} else {
  HIPCHECK(hipSetDevice(p_gpuDevice));
  HIPCHECK(hipMallocManaged(&Hmm, N * sizeof(T)));
  . . .
}

Note: The managed memory capability check may not be necessary; however, if HMM is not supported, managed malloc will fall back to using system memory. Other managed memory API calls will, then, have

Refer to the HIP API documentation for more details on managed memory APIs.

For the application, see hipMallocManaged.cpp

New Environment Variable

The following new environment variable is added in this release:

Environment Variable Value Description
HSA_COOP_CU_COUNT 0 or 1 (default is 0) Some processors support more compute units than can reliably be used in a cooperative dispatch. Setting the environment variable HSA_COOP_CU_COUNT to 1 will cause ROCr to return the correct CU count for cooperative groups through the HSA_AMD_AGENT_INFO_COOPERATIVE_COMPUTE_UNIT_COUNT attribute of hsa_agent_get_info(). Setting HSA_COOP_CU_COUNT to other values, or leaving it unset, will cause ROCr to return the same CU count for the attributes HSA_AMD_AGENT_INFO_COOPERATIVE_COMPUTE_UNIT_COUNT and HSA_AMD_AGENT_INFO_COMPUTE_UNIT_COUNT. Future ROCm releases will make HSA_COOP_CU_COUNT=1 the default.

|

ROCm Math and Communication Libraries

Library Changes
rocBLAS Added
  • Added rocblas_get_version_string_size convenience function
  • Added rocblas_xtrmm_outofplace, an out-of-place version of rocblas_xtrmm
  • Added hpl and trig initialization for gemm_ex to rocblas-bench
  • Added source code gemm. It can be used as an alternative to Tensile for debugging and development
  • Added option ROCM_MATHLIBS_API_USE_HIP_COMPLEX to opt-in to use hipFloatComplex and hipDoubleComplex
Optimizations
  • Improved performance of non-batched and batched single-precision GER for size m > 1024. Performance enhanced by 5-10% measured on a MI100 (gfx908) GPU.
  • Improved performance of non-batched and batched HER for all sizes and data types. Performance enhanced by 2-17% measured on a MI100 (gfx908) GPU.
Changed
  • Instantiate templated rocBLAS functions to reduce size of librocblas.so
  • Removed static library dependency on msgpack
  • Removed boost dependencies for clients
Fixed
  • Option to install script to build only rocBLAS clients with a pre-built rocBLAS library
  • Correctly set output of nrm2_batched_ex and nrm2_strided_batched_ex when given bad input
  • Fix for dgmm with side == rocblas_side_left and a negative incx
  • Fixed out-of-bounds read for small trsm
  • Fixed numerical checking for tbmv_strided_batched
hipBLAS Added
  • Added rocSOLVER functions to hipblas-bench
  • Added option ROCM_MATHLIBS_API_USE_HIP_COMPLEX to opt-in to use hipFloatComplex and hipDoubleComplex
  • Added compilation warning for future trmm changes
  • Added documentation to hipblas.h
  • Added option to forgo pivoting for getrf and getri when ipiv is nullptr
  • Added code coverage option
Fixed
  • Fixed use of incorrect HIP_PATH when building from source.
  • Fixed windows packaging
  • Allowing negative increments in hipblas-bench
  • Removed boost dependency
rocFFT Changed
  • Enabled runtime compilation of single FFT kernels > length 1024.
  • Re-aligned split device library into 4 roughly equal libraries.
  • Implemented the FuseShim framework to replace the original OptimizePlan
  • Implemented the generic buffer-assignment framework. The buffer assignment is no longer performed by each node. A generic algorithm is designed to test and pick the best assignment path. With the help of FuseShim, more kernel-fusions are achieved.
  • Do not read the imaginary part of the DC and Nyquist modes for even-length complex-to-real transforms.
Optimizations
  • Optimized twiddle-conjugation; complex-to-complex inverse transforms have similar performance to foward transforms now.
  • Improved performance of single-kernel small 2D transforms.
hipFFT Fixed
  • Fixed incorrect reporting of rocFFT version.
Changed
  • Unconditionally enabled callback functionality. On the CUDA backend, callbacks only run correctly when hipFFT is built as a static library, and is linked against the static cuFFT library.
rocSPARSE Added
  • csrmv, coomv, ellmv, hybmv for (conjugate) transposed matricescsrmv for symmetric matrices
Changed
  • spmm_ex is now deprecated and will be removed in the next major release
Improved
  • Optimization for gtsv
hipSPARSE Added
  • Added (conjugate) transpose support for csrmv, hybmv and spmv routines
rocALUTION Changed
  • Removed deprecated GlobalPairwiseAMG class, please use PairwiseAMG instead.
Improved
  • Improved documentation
rocTHRUST Updates
  • Updated to match upstream Thrust 1.13.0
  • Updated to match upstream Thrust 1.14.0
  • Added async scan
Changed
  • Scan algorithms: inclusive_scan now uses the input-type as accumulator-type, exclusive_scan uses initial-value-type. This particularly changes behaviour of small-size input types with large-size output types (e.g. short input, int output). And low-res input with high-res output (e.g. float input, double output)
rocSOLVER Added
  • Symmetric matrix factorizations:
    • LASYF
    • SYTF2, SYTRF (with batched and strided_batched versions)
  • Added rocsolver_get_version_string_size to help with version string queries
  • Added rocblas_layer_mode_ex and the ability to print kernel calls in the trace and profile logs
  • Expanded batched and strided_batched sample programs.
Optimizations
  • Improved general performance of LU factorization
  • Increased parallelism of specialized kernels when compiling from source, reducing build times on multi-core systems.
Changed
  • The rocsolver-test client now prints the rocSOLVER version used to run the tests, rather than the version used to build them
  • The rocsolver-bench client now prints the rocSOLVER version used in the benchmark
Fixed
  • Added missing stdint.h include to rocsolver.h
hipSOLVER Added
  • Added SYTRF functions: hipsolverSsytrf_bufferSize, hipsolverDsytrf_bufferSize, hipsolverCsytrf_bufferSize, hipsolverZsytrf_bufferSize, hipsolverSsytrf, hipsolverDsytrf, hipsolverCsytrf, hipsolverZsytrf
Fixed
  • Fixed use of incorrect HIP_PATH when building from source
RCCL Added
  • Compatibility with NCCL 2.10.3
Known issues
  • Managed memory is not currently supported for clique-based kernels
hipCUB Fixed
  • Added missing includes to hipcub.hpp
Added
  • Bfloat16 support to test cases (device_reduce & device_radix_sort)
  • Device merge sort
  • Block merge sort
  • API update to CUB 1.14.0
Changed
  • The SetupNVCC.cmake automatic target selector select all of the capabalities of all available card for NVIDIA backend.
rocPRIM Fixed
  • Enable bfloat16 tests and reduce threshold for bfloat16
  • Fix device scan limit_size feature
  • Non-optimized builds no longer trigger local memory limit errors
Added
  • Scan size limit feature
  • Reduce size limit feature
  • Transform size limit feature
  • Add block_load_striped and block_store_striped
  • Add gather_to_blocked to gather values from other threads into a blocked arrangement
  • The block sizes for device merge sorts initial block sort and its merge steps are now separate in its kernel config (the block sort step supports multiple items per thread)
Changed
  • size_limit for scan, reduce and transform can now be set in the config struct instead of a parameter
  • device_scan and device_segmented_scan: inclusive_scan now uses the input-type as accumulator-type, exclusive_scan uses initial-value-type. This particularly changes behaviour of small-size input types with large-size output types (e.g. short input, int output) and low-res input with high-res output (e.g. float input, double output)
  • Revert old Fiji workaround, because the issue was solved at compiler side
  • Update README cmake minimum version number
  • Block sort support multiple items per thread. Currently only powers of two block sizes, and items per threads are supported and only for full blocks
  • Bumped the minimum required version of CMake to 3.16
Known issues
  • Unit tests may soft hang on MI200 when running in hipMallocManaged mode.
  • device_segmented_radix_sort, device_scan unit tests failing for HIP on WindowsReduceEmptyInput cause random failure with bfloat16
  • Managed memory is not currently supported for clique-based kernels

System Management Interface

Clock Throttling for GPU Events

This feature lists GPU events as they occur in real-time and can be used with kfdtest to produce vm_fault events for testing.

The command can be called with either " -e or --showevents like this:

-e [EVENT [EVENT ...]], --showevents [EVENT [EVENT ...]]  Show event list

Where EVENT is any list combination of VM_FAULT, THERMAL_THROTTLE, or GPU_RESET and is NOT case sensitive.

Note: If no event arguments are passed, all events will be watched by default.

CLI Commands

$ rocm-smi --showevents vm_fault thermal_throttle gpu_reset

======================= ROCm System Management Interface =======================
================================= Show Events ==================================
press 'q' or 'ctrl + c' to quit
DEVICE		TIME		TYPE		DESCRIPTION	

============================= End of ROCm SMI Log ==============================

(Run kfdtest in another window to test for vm_fault events.)

Note: Unlike other rocm-smi CLI commands, this command does not quit unless specified by the user. Users may press either q or ctrl + c to quit.

Display XGMI Bandwidth Between Nodes

The rsmi_minmax_bandwidth_get API reads the HW Topology file and displays bandwidth (min-max) between any two NUMA nodes in a matrix format.

The Command Line Interface (CLI) command can be called as follows:

$ rocm-smi --shownodesbw

======================= ROCm System Management Interface =======================
================================== Bandwidth ===================================
GPU0 GPU1 GPU2 GPU3 GPU4 GPU5 GPU6 GPU7
GPU0 N/A 50000-200000 50000-50000 0-0 0-0 0-0 50000-100000 0-0
GPU1 50000-200000 N/A 0-0 50000-50000 0-0 50000-50000 0-0 0-0
GPU2 50000-50000 0-0 N/A 50000-200000 50000-100000 0-0 0-0 0-0
GPU3 0-0 50000-50000 50000-200000 N/A 0-0 0-0 0-0 50000-50000
GPU4 0-0 0-0 50000-100000 0-0 N/A 50000-200000 50000-50000 0-0
GPU5 0-0 50000-50000 0-0 0-0 50000-200000 N/A 0-0 50000-50000
GPU6 50000-100000 0-0 0-0 0-0 50000-50000 0-0 N/A 50000-200000
GPU7 0-0 0-0 0-0 50000-50000 0-0 50000-50000 50000-200000 N/A
Format: min-max; Units: mps
============================= End of ROCm SMI Log ==============================

The sample output above shows the maximum theoretical xgmi bandwidth between 2 numa nodes,

Note: "0-0" min-max bandwidth indicates devices are not connected directly.

P2P Connection Status

The rsmi_is_p2p_accessible API returns "True" if P2P can be implemented between two nodes, and returns "False" if P2P cannot be implemented between the two nodes.

The Command Line Interface command can be called as follows:

rocm-smi --showtopoaccess

Sample Output:

$ rocm-smi --showtopoaccess
======================= ROCm System Management Interface =======================
===================== Link accessibility between two GPUs ======================
GPU0 GPU1
GPU0 True True
GPU1 True True
============================= End of ROCm SMI Log ==============================

Breaking Changes

Runtime Breaking Change

Re-ordering of the enumerated type in hip_runtime_api.h to better match NV. See below for the difference in enumerated types.

ROCm software will be affected if any of the defined enums listed below are used in the code. Applications built with ROCm v5.0 enumerated types will work with a ROCm 4.5.2 driver. However, an undefined behavior error will occur with a ROCm v4.5.2 application that uses these enumerated types with a ROCm 5.0 runtime.

typedef enum hipDeviceAttribute_t {
  hipDeviceAttributeMaxThreadsPerBlock, // Maximum number of threads per block.
  hipDeviceAttributeMaxBlockDimX, // Maximum x-dimension of a block.
  hipDeviceAttributeMaxBlockDimY, // Maximum y-dimension of a block.
  hipDeviceAttributeMaxBlockDimZ, // Maximum z-dimension of a block.
  hipDeviceAttributeMaxGridDimX, // Maximum x-dimension of a grid.
  hipDeviceAttributeMaxGridDimY, // Maximum y-dimension of a grid.
  hipDeviceAttributeMaxGridDimZ, // Maximum z-dimension of a grid.
  hipDeviceAttributeMaxSharedMemoryPerBlock, // Maximum shared memory available per block in bytes.
  hipDeviceAttributeTotalConstantMemory, // Constant memory size in bytes.
  hipDeviceAttributeWarpSize, // Warp size in threads.
  hipDeviceAttributeMaxRegistersPerBlock, // Maximum number of 32-bit registers available to a
                                          // thread block. This number is shared by all thread
                                          // blocks simultaneously resident on a
                                          // multiprocessor.
  hipDeviceAttributeClockRate, // Peak clock frequency in kilohertz.
  hipDeviceAttributeMemoryClockRate, // Peak memory clock frequency in kilohertz.
  hipDeviceAttributeMemoryBusWidth, // Global memory bus width in bits.
  hipDeviceAttributeMultiprocessorCount, // Number of multiprocessors on the device.
  hipDeviceAttributeComputeMode, // Compute mode that device is currently in.
  hipDeviceAttributeL2CacheSize, // Size of L2 cache in bytes. 0 if the device doesn't have L2
                                 // cache.
  hipDeviceAttributeMaxThreadsPerMultiProcessor, // Maximum resident threads per
                                                 // multiprocessor.
  hipDeviceAttributeComputeCapabilityMajor, // Major compute capability version number.
  hipDeviceAttributeComputeCapabilityMinor, // Minor compute capability version number.
  hipDeviceAttributeConcurrentKernels, // Device can possibly execute multiple kernels
                                       // concurrently.
  hipDeviceAttributePciBusId, // PCI Bus ID.
  hipDeviceAttributePciDeviceId, // PCI Device ID.
  hipDeviceAttributeMaxSharedMemoryPerMultiprocessor, // Maximum Shared Memory Per
                                                      // Multiprocessor.
  hipDeviceAttributeIsMultiGpuBoard, // Multiple GPU devices.
  hipDeviceAttributeIntegrated, // iGPU
  hipDeviceAttributeCooperativeLaunch, // Support cooperative launch
  hipDeviceAttributeCooperativeMultiDeviceLaunch, // Support cooperative launch on multiple devices
  hipDeviceAttributeMaxTexture1DWidth, // Maximum number of elements in 1D images
  hipDeviceAttributeMaxTexture2DWidth, // Maximum dimension width of 2D images in image elements
  hipDeviceAttributeMaxTexture2DHeight, // Maximum dimension height of 2D images in image elements
  hipDeviceAttributeMaxTexture3DWidth, // Maximum dimension width of 3D images in image elements
  hipDeviceAttributeMaxTexture3DHeight, // Maximum dimensions height of 3D images in image elements
  hipDeviceAttributeMaxTexture3DDepth, // Maximum dimensions depth of 3D images in image elements
  hipDeviceAttributeCudaCompatibleBegin = 0,
  hipDeviceAttributeHdpMemFlushCntl, // Address of the HDP\_MEM\_COHERENCY\_FLUSH\_CNTL register
  hipDeviceAttributeHdpRegFlushCntl, // Address of the HDP\_REG\_COHERENCY\_FLUSH\_CNTL register
  hipDeviceAttributeEccEnabled = hipDeviceAttributeCudaCompatibleBegin, // Whether ECC support is enabled.
  hipDeviceAttributeAccessPolicyMaxWindowSize, // Cuda only. The maximum size of the window policy in bytes.
  hipDeviceAttributeAsyncEngineCount, // Cuda only. Asynchronous engines number.
  hipDeviceAttributeCanMapHostMemory, // Whether host memory can be mapped into device address space
  hipDeviceAttributeCanUseHostPointerForRegisteredMem, // Cuda only. Device can access host registered memory
  // at the same virtual address as the CPU
  hipDeviceAttributeClockRate, // Peak clock frequency in kilohertz.
  hipDeviceAttributeComputeMode, // Compute mode that device is currently in.
  hipDeviceAttributeComputePreemptionSupported, // Cuda only. Device supports Compute Preemption.
  hipDeviceAttributeConcurrentKernels, // Device can possibly execute multiple kernels concurrently.
  hipDeviceAttributeConcurrentManagedAccess, // Device can coherently access managed memory concurrently with the CPU
  hipDeviceAttributeCooperativeLaunch, // Support cooperative launch
  hipDeviceAttributeCooperativeMultiDeviceLaunch, // Support cooperative launch on multiple devices
  hipDeviceAttributeDeviceOverlap, // Cuda only. Device can concurrently copy memory and execute a kernel.
                                   // Deprecated. Use instead asyncEngineCount.
  hipDeviceAttributeDirectManagedMemAccessFromHost, // Host can directly access managed memory on
                                                    // the device without migration
  hipDeviceAttributeGlobalL1CacheSupported, // Cuda only. Device supports caching globals in L1
  hipDeviceAttributeHostNativeAtomicSupported, // Cuda only. Link between the device and the host supports native atomic operations
  hipDeviceAttributeIntegrated, // Device is integrated GPU
  hipDeviceAttributeIsMultiGpuBoard, // Multiple GPU devices.
  hipDeviceAttributeKernelExecTimeout, // Run time limit for kernels executed on the device
  hipDeviceAttributeL2CacheSize, // Size of L2 cache in bytes. 0 if the device doesn&#39;t have L2 cache.
  hipDeviceAttributeLocalL1CacheSupported, // caching locals in L1 is supported
  hipDeviceAttributeLuid, // Cuda only. 8-byte locally unique identifier in 8 bytes. Undefined on TCC and non-Windows platforms
  hipDeviceAttributeLuidDeviceNodeMask, // Cuda only. Luid device node mask. Undefined on TCC and non-Windows platforms
  hipDeviceAttributeComputeCapabilityMajor, // Major compute capability version number.
  hipDeviceAttributeManagedMemory, // Device supports allocating managed memory on this system
  hipDeviceAttributeMaxBlocksPerMultiProcessor, // Cuda only. Max block size per multiprocessor
  hipDeviceAttributeMaxBlockDimX, // Max block size in width.
  hipDeviceAttributeMaxBlockDimY, // Max block size in height.
  hipDeviceAttributeMaxBlockDimZ, // Max block size in depth.
  hipDeviceAttributeMaxGridDimX, // Max grid size in width.
  hipDeviceAttributeMaxGridDimY, // Max grid size in height.
  hipDeviceAttributeMaxGridDimZ, // Max grid size in depth.
  hipDeviceAttributeMaxSurface1D, // Maximum size of 1D surface.
  hipDeviceAttributeMaxSurface1DLayered, // Cuda only. Maximum dimensions of 1D layered surface.
  hipDeviceAttributeMaxSurface2D, // Maximum dimension (width, height) of 2D surface.
  hipDeviceAttributeMaxSurface2DLayered, // Cuda only. Maximum dimensions of 2D layered surface.
  hipDeviceAttributeMaxSurface3D, // Maximum dimension (width, height, depth) of 3D surface.
  hipDeviceAttributeMaxSurfaceCubemap, // Cuda only. Maximum dimensions of Cubemap surface.
  hipDeviceAttributeMaxSurfaceCubemapLayered, // Cuda only. Maximum dimension of Cubemap layered surface.
  hipDeviceAttributeMaxTexture1DWidth, // Maximum size of 1D texture.
  hipDeviceAttributeMaxTexture1DLayered, // Cuda only. Maximum dimensions of 1D layered texture.
  hipDeviceAttributeMaxTexture1DLinear, // Maximum number of elements allocatable in a 1D linear texture.
                                        // Use cudaDeviceGetTexture1DLinearMaxWidth() instead on Cuda.
  hipDeviceAttributeMaxTexture1DMipmap, // Cuda only. Maximum size of 1D mipmapped texture.
  hipDeviceAttributeMaxTexture2DWidth, // Maximum dimension width of 2D texture.
  hipDeviceAttributeMaxTexture2DHeight, // Maximum dimension hight of 2D texture.
  hipDeviceAttributeMaxTexture2DGather, // Cuda only. Maximum dimensions of 2D texture if gather operations performed.
  hipDeviceAttributeMaxTexture2DLayered, // Cuda only. Maximum dimensions of 2D layered texture.
  hipDeviceAttributeMaxTexture2DLinear, // Cuda only. Maximum dimensions (width, height, pitch) of 2D textures bound to pitched memory.
  hipDeviceAttributeMaxTexture2DMipmap, // Cuda only. Maximum dimensions of 2D mipmapped texture.
  hipDeviceAttributeMaxTexture3DWidth, // Maximum dimension width of 3D texture.
  hipDeviceAttributeMaxTexture3DHeight, // Maximum dimension height of 3D texture.
  hipDeviceAttributeMaxTexture3DDepth, // Maximum dimension depth of 3D texture.
  hipDeviceAttributeMaxTexture3DAlt, // Cuda only. Maximum dimensions of alternate 3D texture.
  hipDeviceAttributeMaxTextureCubemap, // Cuda only. Maximum dimensions of Cubemap texture
  hipDeviceAttributeMaxTextureCubemapLayered, // Cuda only. Maximum dimensions of Cubemap layered texture.
  hipDeviceAttributeMaxThreadsDim, // Maximum dimension of a block
  hipDeviceAttributeMaxThreadsPerBlock, // Maximum number of threads per block.
  hipDeviceAttributeMaxThreadsPerMultiProcessor, // Maximum resident threads per multiprocessor.
  hipDeviceAttributeMaxPitch, // Maximum pitch in bytes allowed by memory copies
  hipDeviceAttributeMemoryBusWidth, // Global memory bus width in bits.
  hipDeviceAttributeMemoryClockRate, // Peak memory clock frequency in kilohertz.
  hipDeviceAttributeComputeCapabilityMinor, // Minor compute capability version number.
  hipDeviceAttributeMultiGpuBoardGroupID, // Cuda only. Unique ID of device group on the same multi-GPU board
  hipDeviceAttributeMultiprocessorCount, // Number of multiprocessors on the device.
  hipDeviceAttributeName, // Device name.
  hipDeviceAttributePageableMemoryAccess, // Device supports coherently accessing pageable memory
                                          // without calling hipHostRegister on it
  hipDeviceAttributePageableMemoryAccessUsesHostPageTables, // Device accesses pageable memory via the host&#39;s page tables
  hipDeviceAttributePciBusId, // PCI Bus ID.
  hipDeviceAttributePciDeviceId, // PCI Device ID.
  hipDeviceAttributePciDomainID, // PCI Domain ID.
  hipDeviceAttributePersistingL2CacheMaxSize, // Cuda11 only. Maximum l2 persisting lines capacity in bytes
  hipDeviceAttributeMaxRegistersPerBlock, // 32-bit registers available to a thread block. This number is shared
                                          // by all thread blocks simultaneously resident on a multiprocessor.
  hipDeviceAttributeMaxRegistersPerMultiprocessor, // 32-bit registers available per block.
  hipDeviceAttributeReservedSharedMemPerBlock, // Cuda11 only. Shared memory reserved by CUDA driver per block.
  hipDeviceAttributeMaxSharedMemoryPerBlock, // Maximum shared memory available per block in bytes.
  hipDeviceAttributeSharedMemPerBlockOptin, // Cuda only. Maximum shared memory per block usable by special opt in.
  hipDeviceAttributeSharedMemPerMultiprocessor, // Cuda only. Shared memory available per multiprocessor.
  hipDeviceAttributeSingleToDoublePrecisionPerfRatio, // Cuda only. Performance ratio of single precision to double precision.
  hipDeviceAttributeStreamPrioritiesSupported, // Cuda only. Whether to support stream priorities.
  hipDeviceAttributeSurfaceAlignment, // Cuda only. Alignment requirement for surfaces
  hipDeviceAttributeTccDriver, // Cuda only. Whether device is a Tesla device using TCC driver
  hipDeviceAttributeTextureAlignment, // Alignment requirement for textures
  hipDeviceAttributeTexturePitchAlignment, // Pitch alignment requirement for 2D texture references bound to pitched memory;
  hipDeviceAttributeTotalConstantMemory, // Constant memory size in bytes.
  hipDeviceAttributeTotalGlobalMem, // Global memory available on devicice.
  hipDeviceAttributeUnifiedAddressing, // Cuda only. An unified address space shared with the host.
  hipDeviceAttributeUuid, // Cuda only. Unique ID in 16 byte.
  hipDeviceAttributeWarpSize, // Warp size in threads.
  hipDeviceAttributeMaxPitch, // Maximum pitch in bytes allowed by memory copies
  hipDeviceAttributeTextureAlignment, //Alignment requirement for textures
  hipDeviceAttributeTexturePitchAlignment, //Pitch alignment requirement for 2D texture references bound to pitched memory;
  hipDeviceAttributeKernelExecTimeout, //Run time limit for kernels executed on the device
  hipDeviceAttributeCanMapHostMemory, //Device can map host memory into device address space
  hipDeviceAttributeEccEnabled, //Device has ECC support enabled
  hipDeviceAttributeCudaCompatibleEnd = 9999,
  hipDeviceAttributeAmdSpecificBegin = 10000,
  hipDeviceAttributeCooperativeMultiDeviceUnmatchedFunc, // Supports cooperative launch on multiple
                                                         // devices with unmatched functions
  hipDeviceAttributeCooperativeMultiDeviceUnmatchedGridDim, // Supports cooperative launch on multiple
                                                            // devices with unmatched grid dimensions
  hipDeviceAttributeCooperativeMultiDeviceUnmatchedBlockDim, // Supports cooperative launch on multiple
                                                             // devices with unmatched block dimensions
  hipDeviceAttributeCooperativeMultiDeviceUnmatchedSharedMem, // Supports cooperative launch on multiple
                                                              // devices with unmatched shared memories
  hipDeviceAttributeAsicRevision, // Revision of the GPU in this device
  hipDeviceAttributeManagedMemory, // Device supports allocating managed memory on this system
  hipDeviceAttributeDirectManagedMemAccessFromHost, // Host can directly access managed memory on
                                                    //  the device without migration
  hipDeviceAttributeConcurrentManagedAccess, // Device can coherently access managed memory
                                             // concurrently with the CPU
  hipDeviceAttributePageableMemoryAccess, // Device supports coherently accessing pageable memory
                                          // without calling hipHostRegister on it
  hipDeviceAttributePageableMemoryAccessUsesHostPageTables, // Device accesses pageable memory via
                                                            // the host's page tables
  hipDeviceAttributeCanUseStreamWaitValue // '1' if Device supports hipStreamWaitValue32() and
                                          // hipStreamWaitValue64(), '0' otherwise.
  hipDeviceAttributeClockInstructionRate = hipDeviceAttributeAmdSpecificBegin, // Frequency in khz of the timer used by the device-side "clock"
  hipDeviceAttributeArch, // Device architecture
  hipDeviceAttributeMaxSharedMemoryPerMultiprocessor, // Maximum Shared Memory PerMultiprocessor.
  hipDeviceAttributeGcnArch, // Device gcn architecture
  hipDeviceAttributeGcnArchName, // Device gcnArch name in 256 bytes
  hipDeviceAttributeHdpMemFlushCntl, // Address of the HDP_MEM_COHERENCY_FLUSH_CNTL register
  hipDeviceAttributeHdpRegFlushCntl, // Address of the HDP_REG_COHERENCY_FLUSH_CNTL register
  hipDeviceAttributeCooperativeMultiDeviceUnmatchedFunc, // Supports cooperative launch on multiple
                                                         // devices with unmatched functions
  hipDeviceAttributeCooperativeMultiDeviceUnmatchedGridDim, // Supports cooperative launch on multiple
                                                            // devices with unmatched grid dimensions
  hipDeviceAttributeCooperativeMultiDeviceUnmatchedBlockDim, // Supports cooperative launch on multiple
                                                             // devices with unmatched block dimensions
  hipDeviceAttributeCooperativeMultiDeviceUnmatchedSharedMem, // Supports cooperative launch on multiple
                                                              // devices with unmatched shared memories
  hipDeviceAttributeIsLargeBar, // Whether it is LargeBar
  hipDeviceAttributeAsicRevision, // Revision of the GPU in this device
  hipDeviceAttributeCanUseStreamWaitValue, // '1' if Device supports hipStreamWaitValue32() and
                                           // hipStreamWaitValue64() , '0' otherwise.
  hipDeviceAttributeAmdSpecificEnd = 19999,
  hipDeviceAttributeVendorSpecificBegin = 20000,   // Extended attributes for vendors
} hipDeviceAttribute_t;

Known Issues in This Release

Incorrect dGPU Behavior When Using AMDVBFlash Tool

The AMDVBFlash tool, used for flashing the VBIOS image to dGPU, does not communicate with the ROM Controller specifically when the driver is present. This is because the driver, as part of its runtime power management feature, puts the dGPU to a sleep state.

As a workaround, users can run amdgpu.runpm=0, which temporarily disables the runtime power management feature from the driver and dynamically changes some power control-related sysfs files.

Issue with START Timestamp in ROCProfiler

Users may encounter an issue with the enabled timestamp functionality for monitoring one or multiple counters. ROCProfiler outputs the following four timestamps for each kernel:

  • Dispatch
  • Start
  • End
  • Complete

Issue

This defect is related to the Start timestamp functionality, which incorrectly shows an earlier time than the Dispatch timestamp.

To reproduce the issue,

  1. Enable timing using the --timestamp on flag.
  2. Use the -i option with the input filename that contains the name of the counter(s) to monitor.
  3. Run the program.
  4. Check the output result file.

Current behavior

BeginNS is lower than DispatchNS, which is incorrect.

Expected behavior

The correct order is:

Dispatch < Start < End < Complete

Users cannot use ROCProfiler to measure the time spent on each kernel because of the incorrect timestamp with counter collection enabled.

Recommended Workaround

Users are recommended to collect kernel execution timestamps without monitoring counters, as follows:

  1. Enable timing using the --timestamp on flag, and run the application.
  2. Rerun the application using the -i option with the input filename that contains the name of the counter(s) to monitor, and save this to a different output file using the -o flag.
  3. Check the output result file from step 1.
  4. The order of timestamps correctly displays as:

DispathNS < BeginNS < EndNS < CompleteNS

  1. Users can find the values of the collected counters in the output file generated in step 2.

Radeon Pro V620 and W6800 Workstation GPUs

No Support for SMI and ROCDebugger on SRIOV

System Management Interface (SMI) and ROCDebugger are not supported in the SRIOV environment on any GPU. For more information, refer to the Systems Management Interface documentation.

Deprecations and Warnings in This Release

ROCm Libraries Changes – Deprecations and Deprecation Removal

  • The hipfft.h header is now provided only by the hipfft package. Up to ROCm 5.0, users would get hipfft.h in the rocfft package too.
  • The GlobalPairwiseAMG class is now entirely removed, users should use the PairwiseAMG class instead.
  • The rocsparse_spmm signature in 5.0 was changed to match that of rocsparse_spmm_ex. In 5.0, rocsparse_spmm_ex is still present, but deprecated. Signature diff for rocsparse_spmm

rocsparse_spmm in 5.0

rocsparse_status rocsparse_spmm(rocsparse_handle            handle,
                                rocsparse_operation         trans_A,
                                rocsparse_operation         trans_B,
                                const void*                 alpha,
                                const rocsparse_spmat_descr mat_A,
                                const rocsparse_dnmat_descr mat_B,
                                const void*                 beta,
                                const rocsparse_dnmat_descr mat_C,
                                rocsparse_datatype          compute_type,
                                rocsparse_spmm_alg          alg,
                                rocsparse_spmm_stage        stage,
                                size_t*                     buffer_size,
                                void*                       temp_buffer);

rocsparse_spmm in 4.0

rocsparse_status rocsparse_spmm(rocsparse_handle            handle,
                                rocsparse_operation         trans_A,
                                rocsparse_operation         trans_B,
                                const void*                 alpha,
                                const rocsparse_spmat_descr mat_A,
                                const rocsparse_dnmat_descr mat_B,
                                const void*                 beta,
                                const rocsparse_dnmat_descr mat_C,
                                rocsparse_datatype          compute_type,
                                rocsparse_spmm_alg          alg,
                                size_t*                     buffer_size,
                                void*                       temp_buffer);

HIP API Deprecations and Warnings

Warning - Arithmetic Operators of HIP Complex and Vector Types

In this release, arithmetic operators of HIP complex and vector types are deprecated.

  • As alternatives to arithmetic operators of HIP complex types, users can use arithmetic operators of std::complex types.
  • As alternatives to arithmetic operators of HIP vector types, users can use the operators of the native clang vector type associated with the data member of HIP vector types.

During the deprecation, two macros __HIP_ENABLE_COMPLEX_OPERATORS and __HIP_ENABLE_VECTOR_OPERATORS are provided to allow users to conditionally enable arithmetic operators of HIP complex or vector types.

Note, the two macros are mutually exclusive and, by default, set to off.

The arithmetic operators of HIP complex and vector types will be removed in a future release.

Refer to the HIP API Guide for more information.

Refactor of HIPCC/HIPCONFIG

In prior ROCm releases, by default, the hipcc/hipconfig Perl scripts were used to identify and set target compiler options, target platform, compiler, and runtime appropriately.

In ROCm v5.0, hipcc.bin and hipconfig.bin have been added as the compiled binary implementations of the hipcc and hipconfig. These new binaries are currently a work-in-progress, considered, and marked as experimental. ROCm plans to fully transition to hipcc.bin and hipconfig.bin in the a future ROCm release. The existing hipcc and hipconfig Perl scripts are renamed to hipcc.pl and hipconfig.pl respectively. New top-level hipcc and hipconfig Perl scripts are created, which can switch between the Perl script or the compiled binary based on the environment variable HIPCC_USE_PERL_SCRIPT.

In ROCm 5.0, by default, this environment variable is set to use hipcc and hipconfig through the Perl scripts.

Subsequently, Perl scripts will no longer be available in ROCm in a future release.

Warning - Compiler-Generated Code Object Version 4 Deprecation

Support for loading compiler-generated code object version 4 will be deprecated in a future release with no release announcement and replaced with code object 5 as the default version.

The current default is code object version 4.

Warning - MIOpenTensile Deprecation

MIOpenTensile will be deprecated in a future release.

Disclaimer

The information presented in this document is for informational purposes only and may contain technical inaccuracies, omissions, and typographical errors. The information contained herein is subject to change and may be rendered inaccurate for many reasons, including but not limited to product and roadmap changes, component and motherboard versionchanges, new model and/or product releases, product differences between differing manufacturers, software changes, BIOS flashes, firmware upgrades, or the like. Any computer system has risks of security vulnerabilities that cannot be completely prevented or mitigated.AMD assumes no obligation to update or otherwise correct or revise this information. However, AMD reserves the right to revise this information and to make changes from time to time to the content hereof without obligation of AMD to notify any person of such revisions or changes.THIS INFORMATION IS PROVIDED ‘AS IS.” AMD MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE CONTENTS HEREOF AND ASSUMES NO RESPONSIBILITY FOR ANY INACCURACIES, ERRORS, OR OMISSIONS THAT MAY APPEAR IN THIS INFORMATION. AMD SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT WILL AMD BE LIABLE TO ANY PERSON FOR ANY RELIANCE, DIRECT, INDIRECT, SPECIAL, OR OTHER CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF ANY INFORMATION CONTAINED HEREIN, EVEN IF AMD IS EXPRESSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.AMD, the AMD Arrow logo, and combinations thereof are trademarks of Advanced Micro Devices, Inc.Other product names used in this publication are for identification purposes only and may be trademarks of their respective companies. ©[2021]Advanced Micro Devices, Inc.All rights reserved.

Third-party Disclaimer

Third-party content is licensed to you directly by the third party that owns the content and is not licensed to you by AMD. ALL LINKED THIRD-PARTY CONTENT IS PROVIDED “AS IS” WITHOUT A WARRANTY OF ANY KIND. USE OF SUCH THIRD-PARTY CONTENT IS DONE AT YOUR SOLE DISCRETION AND UNDER NO CIRCUMSTANCES WILL AMD BE LIABLE TO YOU FOR ANY THIRD-PARTY CONTENT. YOU ASSUME ALL RISK AND ARE SOLELY RESPONSIBLE FOR ANY DAMAGES THAT MAY ARISE FROM YOUR USE OF THIRD-PARTY CONTENT.