This app adds support for Eurotronic Technology Z-Wave devices in Homey.
- Stella Z-Wave
- Comet Z-Wave
- Spirit Z-Wave
- Read target temperature (not the manual set temperature)
- Read last measured temperature (not trigger-able)
- On every Wake-Up:
- Read measured temperature (trigger-able)
- Set target temperature
- Read/Set modes (Off, Comfortable, Economic, Manual)
- Set economy target temperature (Setting/flow)
- Set manual valve position (flow only)
- Read/Set target temperature
- Read/Set measured (room) temperature (set = flow and/or direct association only)
- Read/Set modes (Off, Comfortable, Economic, Boost, Manual)
- Set economy target temperature (setting/flow)
- Read/Set (child) protection
- Set manual valve position (flow only)
- Error occurred (flow only)
Stella/Comet:
The temperature and mode(s) will only be SET when the device Wakes Up.
Wake-Up is by default set to 1 hour (3600 seconds) on homey.
If you want to change the Wake-Up Interval, make sure you use Steps of 240 seconds.
- English
- Dutch (Nederlands)
v2.0.7:
- [Spirit] Fix device's measured temperature overwriting the external temperature sensor (when used).
- Update meshdriver to v1.3.3
v2.0.6:
- [Comet] Fix crash
v2.0.5:
- [Stella] Fix crash
- [Spirit] (Re)set measured temperature on change of external temperature setting
- Add insights for manual value
v2.0.4:
- Fix the wrong device (last included) being the device always controlled from flows
v2.0.3:
- [Spirit] Fix not being able to send the room temperature
- Added a setting for the Economic temperature
v2.0.2:
- Fix rounding errors manual control
- Rewritten internal functions making the app more stable (in particular with multiple devices)
- Fixed
$deg;C
special character which didn't work, to normal°C
v2.0.1:
- [Spirit] Fix external temperature setting not set-able
- Fix set eco temperature flow card
- Update Meshdriver to v1.2.30
- Fix whitespacing
v2.0.0:
- Rewrite to SDKv2
- Update Meshdriver to v1.2.28
v1.2.1:
- [Spirit] Fix default temperature reporting, normal default is too high.
- [Spirit]: Fix a few text errors.
- [Spirit]: Added id's for (future) firmware updates of the spirit.
v1.2.0:
- Add support Spirit Z-Wave
- Fixed temperature ranges of Stella and Comet thermostatic
- Fixed "manual position" value not being inserted in the global token
- Update Z-Wave driver to 1.1.9
v1.1.3:
- Fix set economic temperature bug.
v1.1.1 & 1.1.2:
- Minor fixes
v1.1.0:
- Add support for manual position control (re-pair needed for full support)
- Update Z-Wave driver to 1.1.8
- A lot of code improvements
v1.0.0:
- Added support Stella Z-Wave
- [Comet] Update mode support
- [Comet] Updated Read me
- [Comet] Changed error logging