- Based on the open project of nano_stepper by Misfittech
- To improve performance, Makerbase Team has made the following changes:
- Ported the project to STMicroelectronics' 32-bit MCU, STM32F103C8T6 ARM 32-bit Cortex™-M3 CPU Core,72 MHz maximum frequency,20k RAM. 64k Flash
- Changed the magnetic encoder to Allegro's A1333LLETR-T Contactless 0° to 360° angle sensor IC ,12bit
- Ported the compilation platform from arduino to PlatformIO —— Convenient for STM32 MCU compilation
- Change the socket with motherboard, now it can work with much 3D printer motherboards using MKS SV_EXT V1.1 by Makerbase
- This project support build and upload by platformio, you can use Atom or Code editor (need install platformio) build it or upload firmware. Please refer to the following method:
- User Manual. click here
- MKS Closed-loop Stepper Motor Installation Tutorial. click here
- Thank you for ruiraptor's about MKS Servo42 Close Loop Motor Tests & Results. click here
- How buy the MKS SERVO42B. click here
- Welcome to follow us on Facebook to learn about the company's latest developments. click here
- Support platfromio build and upload.
- The frmware can be use to MKS SERVO42B and SERVO57B. More about MKS SERVO57B information. click here
- Hot to build and upload? click here
- The hardware is under the Creative Commons Attribution Share-Alike 4.0 License as much of the work is based on Mechaduino project by J. Church. click here
- The firmware is based on nano_stepper project by Misfittech. click here which is licensed as GPL V3 for non-commercial use. If you want to release a closed source version of this product, please contact MisfitTech.net for licensing details.
- Thank you for using MKS products. If you have any questions during use, please contact us in time and we will work with you to solve it.
- For more product dynamic information and tutorial materials, you can always follow MKS's Facebook and GitHub and YouTube. Thank you!
