SmartEVSE/SmartEVSE-2

Issues

• What is the purpose of the LED at ping +12V and LED

  #47 opened 9 months ago by Elektrofix-OL
  1

• Outdated smartevse.nl website

  #57 opened a year ago by Ecno92
  0

• EVSE V3 Set Access bit

  #56 opened a year ago by TonKro
  2

• Cannot open include file error

  #52 opened 2 years ago by lhupfeldt
  16

• Support for EM340 carlo gavazzi

  #55 opened 2 years ago by marcinczenko
  1

• Loading hex file from Linux

  #50 opened 2 years ago by lhupfeldt
  8

• XC8 compiler version

  #49 opened 2 years ago by lhupfeldt
  3

• Renault ZOE ZE50 start of charge problems on hot days

  #45 opened 2 years ago by AndrejValand
  15

• RCM error screen stuck at "PRESS BUTTON TO RESET"

  #46 opened 2 years ago by AndrejValand
  0

• HW fix for LCD re-init?

  #33 opened 3 years ago by zharijs
  5

• Enable or facilitate support for EVCC

  #44 opened 3 years ago by hyperbart
  1

• Proposal for a SmartEVSE to MQTT bridge to enable integration into home automation

  #11 opened 4 years ago by PA1RB
  12

• "Bootloader not found" revisited

  #42 opened 3 years ago by cvanlith
  2

• Share SmartEVSE-3 repository

  #41 opened 3 years ago by kennyschuoler
  2

• Solar charging stability

  #39 opened 3 years ago by mintgroen
  6

• No response for 'state' over Modbus on FW 2.30

  #26 opened 3 years ago by martijndierckx
  5

• SmartEVSE not recognising car anymore

  #36 opened 3 years ago by RIOuShil
  8

• Smart charging not working as expected due to latency

  #35 opened 3 years ago by poelie83
  9

• Advice how to implement charging over night

  #22 opened 3 years ago by jimon
  4

• Switch between single phase and 3 phase

  #34 opened 3 years ago by martijndierckx
  7

• How to enter to bootloader now?

  #32 opened 3 years ago by svinin
  8

• ERROR NO SERIAL COM CHECK WIRING Should I use 120Ω termination resistors ?

  #13 opened 4 years ago by henriterhofte
  2

• SPM1-AC Temco current sensor compatibility ?

  #3 opened 3 years ago by NicolasFOVET
  3

• Reading Modbus interface EVSE

  #2 opened 3 years ago by rvdgaag
  12

• Eastron SDM630 config

  #4 opened 3 years ago by wbitholedotbe
  8

• Use of Access Bit

  #27 opened 3 years ago by kennyschuoler
  0

• Car plugged in + Car battery state

  #25 opened 3 years ago by kennyschuoler
  12

• Nodejs integration

  #24 opened 3 years ago by martijndierckx
  6

• is that any possible way to get the State (Charging,Disconnect,Connected) and the Other configuration Values(Max Power ,Min Power) Parrallely?

  #17 opened 3 years ago by qasimali-byte
  1

• Add modbus input validation?

  #23 opened 3 years ago by sandervandegeijn
  2

• Using RS485 <--> ETH <--> RS485 between SmartEVSE and Sensorbox

  #8 opened 4 years ago by GerardFianen
  1

• IsetBalanced what is the reason of the 80A hardcoded limit?

  #21 opened 3 years ago by fluppie
  1

• Setting LOG_DEBUG from menu?

  #20 opened 3 years ago by fluppie
  1

• Smart mode

  #18 opened 3 years ago by gransat
  4

• How to determine the Charging States from Terminal.

  #12 opened 4 years ago by qasimali-byte
  28

• Real current Register 0x01 V220

  #16 opened 4 years ago by TonKro
  0

• Read / Write Modbus

  #15 opened 4 years ago by TonKro
  12

• Update from 2.06 and solar power

  #14 opened 4 years ago by LolDeibid
  1

• bootloader not found .

  #1 opened 4 years ago by qasimali-byte
  0