ellipso

Introduction

This library provides basic integration with the Sphero device, implementing the protocol documented as Orbotix Communication API.

Usage

All of this is subject to change but:

(require '[ellipso.core :as core])
(def sphero (core/connect-first))

Assuming that you only have 1 sphero paired. Otherwise pass the path of the sphero to use to core/connect.

(require '[ellipso.commands :as commands])
(def rainbow
  (map commands/colour [0xFF0000 0xFF8000 0xFFFF00 0x00FF00 0x0000FF 0x8000FF 0xFF00FF]))
(def spin
  (let [speeds (range 0x30 0xFF 0x30)
        cycle  (concat speeds (reverse speeds))]
    (map (partial commands/spin commands/CLOCKWISE) cycle)))

(reduce commands/execute
        sphero
        (flatten (interpose (commands/pause 1000) (map list rainbow spin))))

Best to review the code in the ellipso.commands namespace. Basically commands are functions that are applied to a ellipso.core/Sphero instance.

You can also receive, asynchronously, sensor data from the Sphero:

(require '[ellipso.sensor-data :as sensors] :reload)
((sensors/data-streaming sensors/everything 100 println) sphero)

This causes the Sphero to send 100 packets of information about the onboard sensors, which are then printed to the screen. If the number was zero then it would stream indefinitely.

Connecting your computer to your Sphero

You need to pair your Sphero with your laptop.

On Ubuntu, the easiest way to do this is to use the Cylon tool

sudo npm install -g cylon
```
Now you can run a

cylon bluetooth scan

It will return the address of your device.  Then do:

cylon bluetooth pair


When prompted for a key - put in 1234

Finally, to connect use -

cylon bluetooth connect


This will return the tty address that you will use to connect to in
your Clojure code.



## TODO
* implement more of the commands, especially the collision detection support;
* look more into the state monad because that's what is needed;
* work out how to do [The Batman Curve](http://mathworld.wolfram.com/BatmanCurve.html)!

## Version History
0.1.2-SNAPSHOT
* Complete rewrite of the packet parsing code to use a statemachine.

0.1.1-SNAPSHOT
* Added sensor data support;
* Fixed a small typo in the example code!

0.1.0-SNAPSHOT
* Initial version with several of the commands implemented.

## License

Copyright © 2013 Matthew Denner

Distributed under the Eclipse Public License either version 1.0 or (at your option) any later version.

Smartnor/ellipso

ellipso

Introduction

Usage

Connecting your computer to your Sphero