Guide
================================================================================
How To Compile uboot:
1. select a reg file
cd lowlevel_reg_info/
cp hi3716cdmoverb_reg_info.reg ../.reg
The file "hi3716cdmoverb_reg_info.reg" is the reg file for board hi3716c,
you should select a reg file according to your dema board.
2. compile uboot
make ARCH=arm CROSS_COMPILE=arm-xxx-linux- godbox -j 128
The "fastboot-burn.bin" is the last image file to be downloaded to board.
3. compile mini-boot
make xxxx mini-boot.bin
make xxxx mini-boot.clean
you are compile mini-boot after compile fastboot-burn.bin
the mini-boot use lzma to compress fastboot-burn.bin.
================================================================================
About Compile option:
1. Compile uboot with option
make ARCH=arm CROSS_COMPILE=arm-xxx-linux- godbox [OPTION=VALUE]
Example:
make ARCH=arm CROSS_COMPILE=arm-xxx-linux- godbox \
HISFV_PHY_U=1 HISFV_PHY_D=3
2. compile options:
HISFV_PHY_U
Up port eth phy id
Example:
make xxxx HISFV_PHY_U=1
HISFV_PHY_D
Up port eth phy id
Example:
make xxxx HISFV_PHY_D=3
CONFIG_SUPPORT_CA
Support advance ca, no define means NOT support advance ca.
The ca define as follow, left define used in source, right define
used in Makefile
CONFIG_SUPPORT_CA_NAGRA "NAGRA"
CONFIG_SUPPORT_CA_CONAX "CONAX"
CONFIG_SUPPORT_CA_NOVEL "NOVEL"
CONFIG_SUPPORT_CA_SUMA "SUMA"
CONFIG_SUPPORT_CA_CTI "CTI"
CONFIG_SUPPORT_CA_OTHER "OTHER"
Make parameter as follow:
make xxxx CONFIG_SUPPORT_CA="NAGRA" // used nagra ca
make xxxx CONFIG_SUPPORT_CA="OTHER" // used other ca
make xxxx // NOT support ca
make xxxx CONFIG_SUPPORT_CA="" // NOT support ca
In source code:
#if defined(CONFIG_SUPPORT_CA_NAGRA)
// Do nagra ca code
#elif defined(CONFIG_SUPPORT_CA_OTHER)
// Do other ca code
#endif
#ifdef CONFIG_SUPPORT_CA
// Do support ca code
#else
// Do NOT support ca code
#endif
CONFIG_SUPPORT_CA_RELEASE
support release in ca config
CONFIG_SUPPORT_CA_DEBUG
support debug in ca config
CONFIG_SDKVERSION
fastboot support a sdk version, the version can pass to kernel.
make xxxx CONFIG_SDKVERSION="0.1.0.0"
CONFIG_WITH_PRODUCT
Compile without product directory.
make xxxx CONFIG_WITH_PRODUCT=""
Compile with product directory.
make xxxx CONFIG_WITH_PRODUCT="y"
CONFIG_DDR_TRAINING
Enable ddr training
CONFIG_FORCE_ENV_IN_NAND
CONFIG_FORCE_ENV_IN_SPI
CONFIG_FORCE_ENV_IN_EMMC
If not defined, environment value will save in startup media;
if define CONFIG_FORCE_ENV_IN_NAND/CONFIG_FORCE_ENV_IN_SPI
/CONFIG_FORCE_ENV_IN_EMMC, environment will force save in NAND/SPIFlash/eMMC.
CONFIG_SHOW_RESERVE_MEM_LAYOUT
Show reserve memory layout
CONFIG_MERGE_IMAGE
this image will merge to fastboot-burn.bin, and use command "run" to run it.
make xxxx CONFIG_MERGE_IMAGE=merge.img
================================================================================
Configure options
define or undefine this config file "include/configs/godbox.h"
CONFIG_CMD_USB
Support usb ohci driver.
CONFIG_CMD_FAT
Support vfat filesystem, this config should include CONFIG_CMD_USB first.
some operation command as follow:
usb start
fatls usb 0
fatload usb 0 0x82000000 kernel.img
================================================================================
u-boot debug command
the follow command is used in debug.
setenv phyaddrup 1 // set ethernet up port phy address 1
setenv phyaddrdown 3 // set ethernet down port phy address 3
Set ethernet phy addr, kernel and u-boot will use the phy addr.
If not set the value, u-boot will use marco "HISFV_PHY_U" and
"HISFV_PHY_D" as default value, and pass it to kernel.
setenv ethact down // tftp file use ethernet down port
setenv ethact up // tftp file use ethernet up port
Set u-boot ethernet active port. this command only affect u-boot.
It will designate the ethernet port which we use transmit data by tftp.
If not set the value, u-boot will loop check which port is active, and
use the first active port. even if the port have not connect to a
tftp-server.
setenv unddrtr y // forbid boot ddr training.
Default config ddr training is enableed,