/pyupdi

Python UPDI driver for programming "new" tinyAVR devices

Primary LanguagePython

pyupdi

Python UPDI driver for programming "new" tinyAVR devices

pyupdi is a Python utility for programming AVR devices with UPDI interface using a standard TTL serial port.

Connect RX and TX together with a suitable resistor and connect this node to the UPDI pin of the AVR device.

Be sure to connect a common ground, and use a TTL serial adapter running at the same voltage as the AVR device.

                        Vcc                     Vcc
                        +-+                     +-+
                         |                       |
 +---------------------+ |                       | +--------------------+
 | Serial port         +-+                       +-+  AVR device        |
 |                     |      +----------+         |                    |
 |                  TX +------+   4k7    +---------+ UPDI               |
 |                     |      +----------+    |    |                    |
 |                     |                      |    |                    |
 |                  RX +----------------------+    |                    |
 |                     |                           |                    |
 |                     +--+                     +--+                    |
 +---------------------+  |                     |  +--------------------+
                         +-+                   +-+
                         GND                   GND