Minecraft® à la carte

Generate sandbox games compatible maps with geo data from IGN (Institut national de l'information géographique et forestière). ign.fr/minecraft

Project Support

Part of the developments concerning Minecraft® à la carte is funded and supported by the French Education Ministry, through the "Programme d'investissements d'avenir" (PIA).

Getting Started

These instructions will get you a copy of the project up and running on your local machine for development and testing purposes.

Prerequisites

A system with Ubuntu 16.04 or Debian 9 or equivalent

Installing

Install the following packages :

apt-get install libgeos-dev libproj-dev libsqlite3-mod-spatialite xvfb software-properties-common

Add the following repository (or newer):

add apt-repository ppa:beineri/opt/qt-5.10.1-trusty

Install QT510 (or newer) :

apt-get install qt510-meta-full

If your version isn't QT510 (replace {VERSION}):

ln -s /opt/qt{VERSION} /opt/qt510

cp /opt/qt510/bin/qt{VERSION}-env.sh /opt/qt510/bin/qt510-env.sh

Do a 755 chmod on the following executables :

chmod 755 sources/minetest_mapper/minetest_mapper
chmod 755 sources/minetest_engine/mcconvert
chmod 755 sources/minecraft_mapper/minutor
chmod 755 sources/minecraft_mapper/launch_mapping.sh

Engine compilation

Please refer to "documentation_minalac_public.pdf" (from page 3) for detailed pictures. You'll also need to specify a Geoportail API key, with access to layers, in config.properties.

Launching engine

Copy the entire "sources" directory into a new directory named "minalac_engine". Create file "logging.properties.1" and populate it with :

handlers= java.util.logging.FileHandler
java.util.logging.ConsoleHandler.level = SEVERE
java.util.logging.FileHandler.level = INFO
java.util.logging.FileHandler.pattern = 1.xml

Create an empty directory with the name "1".

For the engine to run properly, you should have the following file tree :

./1/ (empty directory)
./minalac_engine/logging.properties.1
./minalac_engine/sources/*
./minalac_engine/sources/minecraft_mapper/*
./minalac_engine/sources/minetest_mapper/*
./minalac_engine/sources/minetest_engine/*
./minalac_engine/sources/resources/*
./minalac_engine/sources/target/*
./minalac_engine/sources/lib/*
./minalac_engine/sources/config.properties
./minalac_engine/sources/logging.properties

The following command launches the engine (from "minalac_engine" folder) :

java -jar -Xmx5g -Djava.util.logging.config.file=logging.properties.1 ./sources/target/minecraftmap-0.0.1-SNAPSHOT.jar {plainUnderground} {noBorder} {snow} "../1/minecraft_alac" "{mapName}" 6.33488 45.764334 ./sources/resources/ {format} {ratio} {altitudeRatio} {mapsize} {orientation} {themes} {snowMinHeight} {snowMaxHeight}

Underground: replace by "--plainUnderground" for no underground (nothing otherwise)
Noborder: replace by "--noborder" for no map border (nothing otherwise)
Snow: replace by "--snow" for snow map (nothing otherwise)
Mapname: replace by your map name (will be showed ingame)
Format: map format, choose between:
- minecraft
- bedrock
- edu
- minetest
Ratio: ratio x & y axis, from 1 to 2 with 0.1 step
Altitude ratio: z axis exaggeration, 1 to 5, to be used in relief mode
Map size: km size multiplied by 2 (put 5 for 2.5km)
Orientation: Angle between -90 and 90 degrees
Themes: Separated by commas
- 1: altitude (mandatory)
- 2: hydrography
- 3: land use
- 4: roads
- 5: buildings
- 6: building traces
- 7: hypsometric layer (only in relief mode)
Snow min height: Only if snow is activated. Minimum height of snow (between 0 and 5 meters).
Snow max height: Only if snow is activated. Maximum height of snow (between 1 and 5 meters).

Beware : You need to be within the minimum and maximum values of each attribute, otherwise the generation won't start.

License

This project is licensed under GPLv3.

Contact and help

For any questions about this project, please write us at minecraft[at]ign.fr

SteelAlloy/minalac