StephenCarlson/MiniHawk-VTOL

Issues

• CAD files

  #48 opened 2 years ago by madhunm
  4

• Add spar / alignment rods to aileron surfaces when printing split models.

  #49 opened a year ago by mmosca
  0

• Explicit Internal Geometry (Infill, Ribs), Partial Skin Generation

  #9 opened 4 years ago by StephenCarlson
  2

• Enhancement camera embedded in nosecone

  #47 opened 2 years ago by davidabevan
  3

• Convert rear to pusher prop in forward motion?

  #44 opened 2 years ago by cchance27
  1

• Paper available?

  #41 opened 3 years ago by github-throwaway
  1

• Center of Mass: Add Hints/Bumps on wings for correct location

  #12 opened 3 years ago by StephenCarlson
  7

• Hardpoints and Belly-Pod Attachment points

  #19 opened 4 years ago by StephenCarlson
  1

• Git Restructuring/Branches for Reduced Clone/Fork Size

  #28 opened 3 years ago by StephenCarlson
  1

• README: Add a Tree Diagram of the Assembly Decomposition

  #36 opened 3 years ago by StephenCarlson
  1

• Offer Reduced-Height Sections of the Wings and Nose

  #31 opened 3 years ago by StephenCarlson
  2

• Wells in Wings for VTx, Transcievers, extra electronics

  #6 opened 4 years ago by StephenCarlson
  2

• Hatch/Lid Improvements

  #15 opened 3 years ago by StephenCarlson
  3

• Nacelle Redesign for Zero-Torque Static Condition

  #26 opened 3 years ago by StephenCarlson
  4

• Nacelle Motor Wire Containment and Motion Fixes

  #11 opened 3 years ago by StephenCarlson
  2

• Stereo Camera Integration

  #24 opened 3 years ago by StephenCarlson
  2

• Chevron Alignment Surface for Nacelles

  #7 opened 3 years ago by StephenCarlson
  2

• Offer the Avionics Tray and Battery Tray Variants as DXF, SVG

  #32 opened 3 years ago by StephenCarlson
  0

• Nacelle Redesign-Redesign: Fat-Footprint Reduction and Bearing Pocket Swap

  #30 opened 3 years ago by StephenCarlson
  1

• Add Ardupilot, PX4 Recommended Setups

  #16 opened 4 years ago by StephenCarlson
  4

• Serviceable Servo Arms

  #13 opened 4 years ago by StephenCarlson
  1

• Branding and Logo Design

  #22 opened 4 years ago by StephenCarlson
  10

• Recommended Airspeed Sensor?

  #29 opened 3 years ago by dmazan
  2

• Wings Designed for Mold-ability, Clamshell Mold Design

  #23 opened 4 years ago by StephenCarlson
  0

• Removable and Interchangable Wings

  #25 opened 4 years ago by StephenCarlson
  0

• Outboard Washout Angle reduced, possibly select alternate airfoil for tip.

  #10 opened 4 years ago by StephenCarlson
  1

• Fix Surface Geometry Flaw on Wingtips/caps

  #17 opened 4 years ago by StephenCarlson
  1

• Center of Mass Issues: Lengthen Nose by 22.5mm

  #8 opened 4 years ago by StephenCarlson
  1

• NACA Ducts for Cooling

  #27 opened 4 years ago by StephenCarlson
  1

• Add mount possibility for RF modules and antennas into the wing, near the wing-tip

  #21 opened 4 years ago by nhadrian
  2

• Redefine Trailing-Edge Planform around Rear Rotor

  #14 opened 4 years ago by StephenCarlson
  2

• Add mount option for pitot tube into wings

  #20 opened 4 years ago by nhadrian
  1

• Larger Vertical Fins, Combined Strakes

  #5 opened 4 years ago by StephenCarlson
  2

• Add 5050 SMD LED wells and conduits to the tail

  #4 opened 4 years ago by StephenCarlson
  1

• Wire Routing: Switch to Channels instead of Tunnels/Conduits, or add as option

  #3 opened 4 years ago by StephenCarlson
  1

• Support 28mm to 30mm Outside-Diameter motors on front tilt nacelles

  #2 opened 4 years ago by StephenCarlson
  2

• Add Spar for Rigidity

  #1 opened 4 years ago by StephenCarlson
  1

• Create reduced-resolution STLs of moving assembly members for simulation/SITL

  #18 opened 4 years ago by StephenCarlson
  1