Steve-Mcl/node-red-contrib-omron-fins

Issues

• Node red fins node in mode NX

  #19 opened a year ago by kfernando2001
  12

• How to create a variable in the PLC and set its `AT` property on Omron NJ1400?

  #18 opened a year ago by ottobolyos
  1

• Timeout error

  #4 opened 4 years ago by abrown36
  3

• node-red fins communication timeout error

  #17 opened a year ago by catalinursu01
  1

• Configuring FINS

  #3 opened 4 years ago by Nani2905-AP
  7

• "TypeError" for fins.FinsClient

  #1 opened 5 years ago by pbracs
  11

• How to read a 32bit source

  #16 opened 2 years ago by Olvikhan
  0

• "Response is NG! endCode: 1005, endCodeDescription:Command Format Error: Header Error."

  #15 opened 2 years ago by hipsi
  2

• Possibility to create a subscription node

  #14 opened 3 years ago by GogoVega
  3

• Support for single bits.

  #13 opened 3 years ago by NIVA-IS-PSH
  24

• Response is NG! endCode: 1004, endCodeDescription:Command Format Error: Command format error.

  #12 opened 4 years ago by dapadk
  3

• writing string data to PLC

  #11 opened 4 years ago by dapadk
  5

• NJ102 Read/Write Command Format Error (End code:1004)

  #10 opened 4 years ago by Peaw
  10

• Machine with CJ1M - ETN PLC stop working.

  #9 opened 4 years ago by serafimdasaudade
  3

• TypeError: memoryAddress.match

  #8 opened 4 years ago by serafimdasaudade
  2

• Change Configuration on Runtime

  #7 opened 4 years ago by danix3987
  5

• Correct communication format

  #6 opened 4 years ago by FrantaD
  6

• "Response is NG! endCode: 2108, endCodeDescription:Write Not Possible: Cannot change."

  #5 opened 4 years ago by bjornidar
  4

• Different response types

  #2 opened 4 years ago by pbracs
  2