StevenMHernandez/ESP32-CSI-Tool

Issues

• Configuring incomplete, errors occurred!

  #54 opened 3 years ago
  7

• ninja failed with exit code 1

  #53 opened 2 years ago
  15

• Cannot use pipes with powershell

  #52 opened 2 years ago
  4

• esp_wifi_set_csi(1) Error

  #51 opened 3 years ago
  3

• Monitor garbled

  #50 opened 3 years ago
  4

• Customizing the CSI inter-sample interval

  #48 opened 3 years ago
  3

• weird CSI output

  #47 opened 3 years ago
  1

• xtensa Error, Ninja failed with exit code 1

  #46 opened 3 years ago
  2

• AP not connecting to other (non-ESP32) devices

  #45 opened 3 years ago
  35

• No serial ports found.

  #44 opened 3 years ago
  4

• can't able to download csi data

  #43 opened 3 years ago
  2

• accessing issue

  #42 opened 3 years ago
  1

• Not working with v4.0 since xtensa-esp32-elf tool version in esp-idf v4 has an issue

  #41 opened 3 years ago
  8

• When exporting CSI：BrokenPipeError: [Errno 32] Broken pipe

  #40 opened 3 years ago
  11

• Unclear if CSI is being collected accurately

  #38 opened 3 years ago
  2

• active_sta mode build error : "main.cc:148:70: error: cannot convert 'esp_interface_t' to 'wifi_interface_t'"

  #37 opened 3 years ago
  9

• Unicode decode error with the python utility, and weird logs in terminal

  #35 opened 3 years ago
  5

• Amplitude and phase plot looks inconsistent in comparison to plot captured via https://github.com/jonathanmuller/ESP32-gather-channel-state-information-CSI-/blob/master/plot_csi_data/amplitude.png or nexmon CSI

  #34 opened 3 years ago
  3

• Create a document comparing ESP32 module features (Which module should I go for?)

  #33 opened 3 years ago
  4

• collect2.exe error

  #32 opened 3 years ago
  4

• active_sta mode: not able to collect CSI data

  #31 opened 3 years ago
  2

• Active_ap mode: CSI collection process not smooth

  #30 opened 2 years ago
  11

• Not able to collect CSI in active_sta mode

  #29 opened 3 years ago
  6

• Build stopped subcommand failed?

  #28 opened 3 years ago
  3

• Amplitude/phase oscillates rapidly between upper and lower value

  #27 opened 3 years ago
  3

• [bug:v4.3] Understanding the lines between the CSI data feed

  #26 opened 3 years ago
  5

• Make Flash Error

  #25 opened 3 years ago
  1

• Visualizing CSI amplitude Data in Real Time

  #24 opened 2 years ago
  12

• What each value in obtained CSI indicates?

  #23 opened 3 years ago
  9

• Why is there no csi when using passive-mode?

  #22 opened 3 years ago
  17

• Inconsistent packet transmit rate

  #21 opened 3 years ago
  5

• Error while Flashing ESP32

  #20 opened 3 years ago
  3

• CSI reading process is extremely jerky, stops unexpectedly many times

  #19 opened 3 years ago
  11

• Test with Windows Computer

  #18 opened 3 years ago
  8

• multiple TX-RX CSI setup

  #17 opened 3 years ago
  1

• pass the cross session test with ESP32 CSI

  #16 opened 3 years ago
  4

• Simultaneous RX/TX ?

  #15 opened 3 years ago
  1

• Something went wrong while building the STATION mode

  #14 opened 3 years ago
  2

• Unable to get CSI values

  #13 opened 4 years ago
  3

• Create a reference script for Subcarrier Order

  #12 opened 4 years ago
  10

• Update from ESP-IDF v3 to ESP-IDF v4 (stable)

  #11 opened 3 years ago
  9

• Error when running in Station mode

  #10 opened 4 years ago
  6

• Error running make monitor: _WindowOverflow4 at /home/yan/esp/esp-idf/components/freertos/xtensa_vectors.S:1779

  #9 opened 4 years ago
  1

• CSI with packet payload

  #8 opened 4 years ago
  7

• Can we obtain the Power Delay Profile from the ESP32 Wifi?

  #7 opened 3 years ago
  3

• problem in getting csv file

  #6 opened 3 years ago
  25

• Determine which baud rates work well across platforms (Mac, Windows, Linux) (i.e. "baud rate 1552000 does not work")

  #5 opened 4 years ago
  22

• Support to IEEE 802.11 protocol

  #4 opened 4 years ago
  3

• How to adjust TX rate?

  #3 opened 4 years ago
  6

• CSI capture method

  #2 opened 4 years ago
  10