StevenMHernandez/ESP32-CSI-Tool

Issues

• Why can the sta end also receive CSI?

  #70 opened 2 years ago by cquptJiang
  10

• Collected CSI DATA

  #111 opened 2 months ago by suwechan
  0

• No CSI data

  #110 opened 2 months ago by AMCoder-80
  0

• Getting slow response time after some data points

  #109 opened 3 months ago by JoaoSandrini
  2

• Multi-antenna support

  #101 opened a year ago by mweisel3
  2

• sample rate of CSI

  #55 opened 2 years ago by zhy102
  3

• @StevenMHernandez

  #106 opened 7 months ago by myasin3
  1

• Transmission of a Known Signal to Improve Wi-Fi Sensing

  #107 opened 7 months ago by 1616255
  0

• Figure 1 not open

  #104 opened 8 months ago by Cizzy5
  4

• ESP32 CSI Tool Config not appears on espidf-4.3.7

  #102 opened 9 months ago by AdroitBit
  1

• Trouble understanding csi raw data

  #103 opened 9 months ago by AdroitBit
  1

• About the csi phase

  #105 opened 8 months ago by Worange12
  1

• documentation for the excel sheet

  #96 opened a year ago by wael-ejkhidem
  3

• CSI Precision/Resolution

  #92 opened a year ago by navidhasanzadeh
  1

• Request for Guidance on Ensuring Fixed Tx Power for Accurate RSSI and CSI Data on ESP32

  #100 opened a year ago by RabihND
  0

• Both sides get the principle of CSI

  #99 opened a year ago by Sisyphus-pandapia
  0

• I have identified the null/guard subcarriers, via code how do I identify these subcarriers and remove this from the large CSI matrix?

  #98 opened a year ago by olliec28
  0

• is there anything trouble when I use ESP32-S3?

  #97 opened a year ago by Rosefeild
  0

• unable to understand the collected data

  #88 opened 2 years ago by dheeraj7092
  1

• issue in csi data collection

  #84 opened 2 years ago by dheeraj7092
  5

• On the number of dimensions of the CSI data obtained with this tool

  #91 opened a year ago by yuya-ki0526
  0

• On the number of dimensions of the CSI data obtained with this tool

  #90 opened a year ago by yuya-ki0526
  0

• Signal denoising and filtering

  #89 opened 2 years ago by xiaokangkang6
  2

• I stop receiving CSI data after two data points

  #87 opened 2 years ago by jayavanth
  1

• Does obtaining CSI information through either an active or passive station (STA) or access point (AP) occupy both cores?

  #86 opened 2 years ago by jayavanth
  2

• ModuleNotFoundError: No module named 'matplotlib'

  #85 opened 2 years ago by dwitio123
  1

• Sir,I would like to know the meaning of each item in the CSV file, is there any relevant introduction?

  #83 opened 2 years ago by xiangshang-kok
  4

• regarding the paper"WiFi Sensing on the Edge: Signal Processing Techniques and Challenges for Real-World Systems"

  #82 opened 2 years ago by du7092
  1

• Collecting CSI data

  #81 opened 2 years ago by Gowtham-Gorajana
  9

• How to adjust time stamp using SETTIME?

  #78 opened 2 years ago by Arijitdutta19910601
  2

• Can't modify parameters in `idf.py menuconfig`

  #80 opened 2 years ago by ThomasBouiniere
  12

• General Questions about the CSI data

  #79 opened 2 years ago by olliec28
  8

• Question

  #63 opened 2 years ago by ZaQa92
  2

• How to capture the whole real time CSI wave into a figure

  #77 opened 2 years ago by olliec28
  0

• How to flash transmitter when not connected to laptop

  #76 opened 2 years ago by tiyuuu
  1

• No CSI data output following successful flash

  #75 opened 2 years ago by olliec28
  1

• E (748) vfs_fat_sdmmc: slot init failed (0x103).

  #74 opened 2 years ago by Sunlu2333
  3

• How to plot the collected CSI data

  #71 opened 2 years ago by Gowtham-Gorajana
  11

• How to implement "passtive" subproject to get data from AP or STA？

  #73 opened 2 years ago by Sunlu2333
  9

• Bug on serial_append_time.py, does not output a csv a "binary file" with non-utf8 encoded characters

  #72 opened 2 years ago by agathauy
  2

• use csi for location

  #68 opened 2 years ago by xiaokangkang6
  2

• Not getting Bandwidth of 40Mhz in CSI data

  #61 opened 3 years ago by pampariumeshchandra
  1

• Update documentation from esp-idf v4.3.1 up to v4.4 and review that the project still works

  #65 opened 2 years ago by Sisyphus-pandapia
  2

• When using the function "passtive",unable to get data from AP or STA

  #59 opened 2 years ago by Sisyphus-pandapia
  1

• Raw CSI data

  #64 opened 2 years ago by tiyuuu
  1

• sending rate

  #58 opened 2 years ago by gmcd310
  1

• OSError: [Errno 22] Invalid argument

  #60 opened 2 years ago by AlexXu12256
  4

• CSI amplitudes

  #62 opened 2 years ago by rockmanexe4
  1

• the code for drawing

  #57 opened 3 years ago by gmcd310
  3

• wifi not connected. waiting...

  #56 opened 3 years ago by gmcd310
  2