Smartthings device handler for Home Depot Home Decorators Zigbee Fan (and fan controller) produced by King of Fans or Hampton Bay Universal Wink Enabled White Ceiling Fan Premier Remote Control. This device handler is based on https://github.com/dcoffing/KOF-CeilingFan, refactored to work with new Smartthings app and to provide simpler user experience.
You can find the complete fan (including the controller) on the following links:
This device handler has a main device for Fan Control and a child device for light control
If you are using Google assistant you can set option dimmerAsFanControl to true to control fan speed using light dimmer. Google assistant does not properly support fan speed dial, showing it as a light dimmer instead. When this option is activated you can set fan speed with the command in Google Assistant as "Set speed to <0 to 100>", where:
- 0 to 24 is speed 0 (turn off),
- 25 to 49 is speed 1 (low),
- 50 to 74 is speed 2 (medium),
- 75 to 100 is speed 3 (high),
Note that you can still use the on/off button as usual (fan on/off). To control light level, you must use child light device (shown as a regular light).
When dimmerAsFanControl option is activated, fan slider and dimmer will sync when any of them changes values as seen in the following animation:
Also note that Google Home sees the fan dimmer as a "brightness", but the device handler respond as a fan control. When you use the command "Ok Google, set fan to 15%", google you turn on fan level 1 and respond "Changing brightness to 15%" instead of "Changing fan level to 15%". You can also turn the fan on and of using the command "Ok Google, turn fan ON/OFF".
To control lights device child, simply use the command "Ok Google, set Fan Light brightness to 30%".
This device handler was tested using Samsung Connect Home Pro (Smartthings V2 Hub) with Firmware version 000.027.00010 in a set up with +10 Zigbee devices. I used two King Of Fans, Inc. model HDC52EastwindFan at the same network. Google assistant commands were validated using Google Home app v 2.19.1.18 running under Android Oreo, Google Nest mini running firmware 191160 and Google Nest Hub running firmware 191160. All commands were tested using US-English language set.
This device handler was tested using SmartThings WiFi, Plume US (Smartthings V3 Hub) with Firmware version 000.029.00009 in a set up with +10 Zigbee devices. I used two King Of Fans, Inc. model HDC52EastwindFan at the same network. Google assistant commands were validated using Google Home app v 2.26.1.8 running under Android Oreo, Google Nest mini running firmware 191160 and Google Nest Hub running firmware 191160. All commands were tested using US-English language set.
- Random delays to update child device.
- Excess message logging and events generated
- Child light device shows as off-line.
Follow Smartthings Git Hub Integration Guide, using user rafaelborja and repository SmartthingsKingOfFansZigbee.
After creating the device handlers, you must change/set the Fan device type to "King of Fans Zigbee Fan Controller" on the device tab on IDE. You can do so by clicking on edit over the device and selecting the device from the list.
**Developer note: Please feel free to try Smartthings Git Hub Integration and validate if this issue is specific to my installation. **
You can also create a new device handler from code copying and pasting king-of-fans-zigbee-fan-controller.groovy and king-of-fans-zigbee-fan-light-child-device.src source code
dcoffing made an amazing work with the legacy device handler https://github.com/dcoffing/KOF-CeilingFan. This device handler is not working with the new Smartthings app. For this reason I decided to make the needed changes and send PRs to contribute with the existing project, but unfortunately the project seems to be abandoned.
This device handler has also a simplified interface and less child devices (no child devices for the fan, only one for the light).
This device handler would not be possible with all work and effort from dcoffing and all that contributed to the legacy device handler.
A single 4 step slider is simpler to maintain and is already supported by most of voice assistants. If you would like to have, feel free to fork the project and send a PR.
This functionality is not supported at the moment.