Copyright 2016 SuperHouse Automation Pty Ltd
SuperHouse site: www.superhouse.tv
SuperHouse email: info@superhouse.tv
A 16-channel servo controller shield for the WeMos D1 Mini and other compatible boards based on the same header format.
Features:
- 16 PWM output channels at 3.3V.
- I2C interface with pull-up resistors.
- Configurable I2C address to allow stacking. Default address 0x40.
- PCA9685 PWM controller IC.
- SCL: D1. SDA: D2.
- External power terminals for powering servos at 6V.
- Power jumper to link D1 Mini 5V rail to servo power.
- OE (active low Output Enable) broken out for manual connection if required.
- Power LED to show when servo power is available.
More information is available at:
http://www.superhouse.tv/d1mservo
The design is saved as an EAGLE project. EAGLE PCB design software is available from www.cadsoftusa.com free for non-commercial use. To use this project download it and place the directory containing these files into the "eagle" directory on your computer.
The specific terms of distribution of this project are governed by the license referenced below.
Licensed under the TAPR Open Hardware License (www.tapr.org/OHL). The "license" folder within this repository also contains a copy of this license in plain text format.