/Telink-Zigbee-serial-flash-tool

Primary LanguagePython

Telink Zigbee serial flash tool

NOTE: This project is not thoroughly tested yet!

Reliably read, write and erase flash memory for Telink Zigbee boards (eg. 8258) with just a USB-to-serial converter.

Connections

Usage

Clone or download the repository and execute Telink_Tools.py in a system with Python installed.

Examples

Backup entire flash

1 MB flash

Telink_Tools.py -p COM3 read_flash 0 1048576 dump.bin

512 KB flash

Telink_Tools.py -p COM3 read_flash 0 524288 dump.bin

Erase first 3 flash sectors (aka 12 KB. 1 sector = 4 KB)

Telink_Tools.py -p COM3 erase_flash 0 3

Burn firmware at address 0

Please note that flash must be erased before write. You need to compute the number of minimum sectors to be erased remembering that 1 sector = 4 KB.

Telink_Tools.py -p COM3 erase_flash 0 31	
Telink_Tools.py -p COM3 write_flash 0 motionSensor_TS0202.bin

Flash layout

Credits

https://github.com/Ai-Thinker-Open/TBXX_Flash_Tool https://github.com/Ai-Thinker-Open/Telink_825X_SDK/tree/master/example/bootloader https://github.com/pvvx/TlsrComProg825x