Biodom IQ2 Controller running statistics

Monitoring your Biodom IQ2 Controller via MQTT

The Biodom IQ2 Controller software contains MQTT integration. This option is by default disabled, but can be actived via the config file in the modules\MqttConfig.xml in the folder of LucifireTabletUI. Here I describe the steps to be taken.

Steps

Step 1 - Setup an MQTT message broker. For example Mosquito

version: '3.2'

services:
  mqtt:
    container_name: mqtt
    build: ./mosquitto/
    environment:
      - MOSQUITTO_PASSWORDFILE='/mosquitto/config/passwordfile'
    ports:
      - 1883:1883
      - 9001:9001
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - ./conf:/mosquitto/config
      - ./data:/mosquitto/data
      - ./log:/mosquitto/log
    environment:
     - TZ=Europe/Amsterdam
    restart: always

Step 2 - Configure MQTT within the Biodom controller;
Edit the C:\LucifireTabletUI\modules\MqttConfig.xml with texteditor for example
Replace 192.168.123.123 with the IP of your mosquitto mqtt message broker

<?xml version="1.0"?>
<MqttXmlSettings xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
  <Id Postfix="">{serial}</Id>
  <Type>1</Type>
  <BrokerHost>192.168.123.123</BrokerHost>
  <BrokerPort>1883</BrokerPort>
  <User>mosquitto</User>
  <Password>mosquitto</Password>
  <CACert></CACert>
  <TLSProtocol></TLSProtocol>
</MqttXmlSettings>

Step 3 - Check of you get any messages in your mqtt broker, for example with http://mqtt-explorer.com/

Step 4 - Read the Biodom IQ2 controller mqtt values in your Home Automation system. For example https://www.home-assistant.io/

T0mWz/biodom-iq2

Biodom IQ2 Controller running statistics

Steps