TG9541/stm8ef-modbus

Issues

• Implement a minimal MODBUS-RTU Client

  #44 opened 3 years ago by TG9541
  3

• Support board "modbus_relay8"

  #40 opened 4 years ago by TG9541
  1

• Allow configuration of µC variant and buffer size in UARTISR

  #58 opened 2 years ago by TG9541
  0

• Use DEFER-able dummy BUSCTRL as the default

  #55 opened 2 years ago by TG9541
  0

• Take over docs from STM8 eForth issue

  #1 opened 2 years ago by TG9541
  4

• Add full board support for the STM8S001J3RS485 board

  #36 opened 2 years ago by niuyingxian
  3

• change node-id and baud without console

  #43 opened 2 years ago by nav208
  10

• New issue with modbus on STM8S103F3.

  #42 opened 2 years ago by szymonk159
  34

• Remove obsolete files

  #52 opened 2 years ago by TG9541
  0

• Package source files in the binary release

  #51 opened 2 years ago by TG9541
  0

• Support MODBUS ASCII encoding

  #7 opened 2 years ago by TG9541
  1

• Use GitHub Actions instead of Travis-CI

  #49 opened 2 years ago by TG9541
  1

• Improve FC>XT for some FC codes > FC16

  #47 opened 3 years ago by TG9541
  0

• First transmission after reset may release the bus too early

  #45 opened 3 years ago by TG9541
  1

• Pictures (no issue)

  #32 opened 5 years ago by TG9541
  3

• Problems with uploading modbus files on STM8S103F3 board.

  #41 opened 3 years ago by szymonk159
  4

• STM32F030F4 2-Relay Board

  #39 opened 4 years ago by sebstud
  1

• Update to STM8 eForth 2.2.27.pre2

  #37 opened 4 years ago by TG9541
  0

• Use one buffer for receive and send

  #34 opened 5 years ago by TG9541
  1

• Holding register mapping to holding always writes to highest register cell

  #33 opened 5 years ago by TG9541
  0

• Better implementation for "holding" register access

  #30 opened 5 years ago by TG9541
  0

• FC05 addressing off-by-one

  #28 opened 5 years ago by TG9541
  1

• Support STM8S001J3RS485 as an STM8 eForth custom target

  #9 opened 5 years ago by TG9541
  1

• Add C0135 Inputs

  #20 opened 5 years ago by TG9541
  0

• FC15 "Write Multiple Coils" not working

  #19 opened 5 years ago by TG9541
  3

• Make FC03 and FC04 compatible with the new FC01 and FC02

  #25 opened 5 years ago by TG9541
  0

• Use bitfield addressing to improve FC-1 and FC-2

  #23 opened 5 years ago by TG9541
  0

• Improve comments in MBPROTO and MBSERVER

  #16 opened 5 years ago by TG9541
  0

• use C0135 key "S2" for reset-to-defaults

  #17 opened 5 years ago by TG9541
  1

• Split demo and application code

  #15 opened 5 years ago by TG9541
  0

• Relays not switching

  #12 opened 5 years ago by tealbrains
  24