/vyos-jenkins

Instructions on how to build your own vyos package mirror for stable branches (1.3 equuleus/1.4 sagitta) with Jenkins (for ISO build)

Primary LanguageShell

Prologue

If you're trying to build VyOS equuleus/sagitta ISO image with the usual way you may see following errors:

E: Failed to fetch http://dev.packages.vyos.net/repositories/equuleus/dists/equuleus/InRelease  403  Forbidden [IP: 104.18.30.79 443]
E: The repository 'http://dev.packages.vyos.net/repositories/equuleus equuleus InRelease' is not signed.
E: Failed to fetch http://dev.packages.vyos.net/repositories/sagitta/dists/sagitta/InRelease  403  Forbidden [IP: 104.18.30.79 443]
E: The repository 'http://dev.packages.vyos.net/repositories/sagitta sagitta InRelease' is not signed.

You may also see Sorry, you have been blocked if you try to visit these links, but you aren't blocked - everyone is blocked. This is due to change in VyOS policy where they don't offer their dev.packages.vyos.net/repositories for public anymore. This change applies only to stable branches (like 1.3 equuleus/1.4 sagitta), you can still build current/development branch with official repository.

You want to continue to use VyOS long term? Then you can switch to current/development branch if you think that's good idea for your use case. If you like to use stable branch then you would need to obtain VyOS subscription. The only other option currently is to build your own dev.packages.vyos.net package repository and that's what this project is all about.

Purpose

The goal of this project is to reproduce package repositories of stable branches formerly available at dev.packages.vyos.net and currently it's possible to use the automated scripts or the manual guide to reproduce the package repositories for 1.3.x equuleus and 1.4.x sagitta. The package repositories allow you to build LTS ISO with the usual slightly modified way.

Host requirements and precautions

All examples and scripts assume clean installation of Debian 12 (Bookworm). Basic installation with standard system utilities is enough.

We also recommend dedicated virtual machine.

The build scripts are running under the jenkins user and thus in theory if you execute malicious build it can compromise your Jenkins and possibly your host. That's why you want dedicated OS and you don't want to share the Jenkins with other projects and ideally don't share the operating system with anything else either. This risk isn't likely - it would require compromised GitHub repositories to happen.

The hardware requirements are significant:

  • 16GB total RAM (8GB RAM + 8GB swap is good option)
  • 100GB HDD
  • CPU will make builds faster or slower, there is no hard requirement

The builds are memory hungry, but you don't need 16GB of physical RAM. You can have large swap to compensate, and you will still get good performance this way since the above 8GB threshold is reached only few times by few builds.

Multiple options

Thanks to work of @GurliGebis we now can use automated scripts instead of the legacy manual guide. The manual guide is deprecated and available for historical purposes here manual/readme.md. The automated scripts are now preferred method.

Automated scripts

The automated scripts execute all manual steps with minimal interaction. The process is divided into 8 steps/scripts. These 8 scripts configure Jenkins, prepare the package repositories, build the packages and there is also one additional script to build ISO.

Obtain the scripts:

wget https://github.com/dd010101/vyos-jenkins/archive/refs/heads/master.tar.gz -O /tmp/vyos-jenkins.tar.gz
tar -xf /tmp/vyos-jenkins.tar.gz -C /tmp
mv /tmp/vyos-jenkins-master /opt/vyos-jenkins
cd /opt/vyos-jenkins

If you want to build only specific branch

Configure BRANCH environment variable to desired branch before you run any script. Default or empty value means all branches. This setting is remembered, you can override by defining empty value.

export BRANCH="sagitta"

If you want to distribute ISO

Then you should remove VyOS branding, you can do this by configuring NOT_VYOS environment variable to yes before you run any script. If you set yes then NOTvyos name would be used as replacement for VyOS. If you set any other non-empty value like someos then this name would be used instead of NOTvyos. Beware - by default, the ISO will include VyOS branding thus you shall not distribute the ISO. This setting is remembered, you can override by defining empty value.

export NOT_VYOS="yes"

Then execute each script and follow instructions:

  • 1-prereqs.sh- installs dependencies.
  • 2-jenkins.sh - configures Jenkins, interaction required:
    • It asks you to log-in into Jenkins, after you do then confirm.
    • Then it asks you to install recommended plugins in Jenkins, after it's completed confirm.
    • Then it asks you to create admin Jenkins account, after you do then enter your username and confirm.
    • At last, it will ask you to create Jenkins API Token, after you do then you enter the token and confirm.
  • 3-repositories.sh - creates empty package repositories.
  • 4-uncron.sh - prepares uncron service.
  • 5-docker-jobs.sh - builds vyos-build docker images, takes a while.
  • 6-provision-project-jobs.sh - prepares package jobs in Jenkins.
  • 7-build-project-jobs.sh - builds package jobs, takes a long while.
  • 8-nginx.sh - configures nginx vhost for APT repositories.

If all went well, then all steps should complete successfully and then you can:

  • build-iso.sh - builds the ISO :), interaction required, takes a while:
    • It asks you to specify branch equuleus or sagitta, after you do then confirm.
    • At least, it asks you to specify build-by, after you do then confirm and wait. This identifier is used as the --build-by parameter, this can be e-mail or any other identifier.
    • There is also option to change what custom packages you want to include. By default, the only additional package is vyos-1x-smoketest. If you want more or different custom packages then you can override the default value via the CUSTOM_PACKAGES env variable, for example: export CUSTOM_PACKAGES="vyos-1x-smoketest emacs". If you want to use this then please set this variable always before you build ISO.

Now you should have the ISO(s) in current directory (/opt/vyos-jenkins).

If something isn't right, then see Something is wrong.

You can rerun the scripts as you wish and the scripts should do only required/changed steps. It's also good idea to do this from time to time. If your scripts are somewhat old, and you face some error, then please first try to download and run latest scripts.

Beware - like with any custom ISO you shall test every ISO you build with your configuration and traffic flowing. If are interested in the Smoketest see the Smoketest action. The Smoketest isn't substitute for real world testing.

Jenkins will automatically detect changes and build new packages, thus if you keep build server running then it should keep the repositories up to date by itself. This way you can just use build-iso.sh again and again. You should check on the Jenkins Build History from time to time and/or before you build ISO to make sure all is going well. This is the same way how the official repository works.

There is also option to shut down the OS and use it only when you need it. The Jenkins checks if any package needs rebuild in 1 hour interval, the check if 1 hour elapsed happens each 15th minute of hour. So if you boot the OS and start the Jenkins, then in worse case you would need to wait up to 15 minutes (to the closest 15th minute of hour), before rebuild of package would start. Then you shall wait before the Build Queue and Build Executor Status is empty, then make sure no build failed in the Build History, after this you can use build-iso.sh again.

Something is wrong

You may face situation when Jenkins build may fail or doesn't produce .deb packages and thus ISO build fails with unmet dependencies. Sometimes the Jenkins build fails for temporary reason like network/server issue, thus find the package/job/branch in question (like linux-kernel/sagitta) and retry the build with Build now.

Sometimes the build steps/instructions change over time (mainly due to changes on VyOS side), and thus for example you need to change or add additional package. If you are using automated scripts then make sure you have the latest version, if not then download scripts again and rerun all them.

There are two logs you should check for pointers.

  1. In Jenkins - find the job/packages of your interest - select branch of interest and find last run with Git SHA1: .... There may be other runs without Git SHA1: ... - those aren't build runs, those are branch indexing runs that check if package needs rebuild - ignore those. If you don't see any runs then use the Build now action to trigger new build run. In specific run you should see Console Output.
  2. The uncron.service has log file you can access via journalctl --no-pager -b -u uncron.service, look for package in question and check if there isn't error output or Job exited with code 0 other than 0.

If you face errors that don't make sense then it's likely your docker container is outdated or your Jenkins configuration is missing some pieces. Thus, as first thing you can try to rebuild the docker container and if that doesn't help then verify all the Jenkins configuration is in its place.

Smoketest

VyOS has testing procedure called smoketest. This test checks mainly configuration, it's not complete test, it will only tell you if something is very wrong, passed test doesn't mean image will be necessarily fully functional - with that said it's still useful somewhat, just don't put too much trust in it. It also has tendencies to generate a lot of false positives, beware.

Requirements

You will need host that supports virtualization and thus can run KVM. Main test (make testd) takes around two hours to complete, additional tests aren't that slow.

There is requirement to include vyos-1x-smoketest package in your ISO image build. Automated scripts by default include the vyos-1x-smoketest unless you change it via CUSTOM_PACKAGES. If you build ISO via other means then you need to include the package via the --custom-package vyos-1x-smoketest option when you run ./configure (equuleus) or ./build-vyos-image iso (sagitta).

Testing environment

The automated scripts purge the vyos-build and rename the ISO, thus we need to reverse this if we want to run tests. If you build your ISO manually then you can skip these steps since you should already have vyos-build repository with the ISO in the build directory with the default name.

Clone the vyos-build repo:

git clone https://github.com/dd010101/vyos-build.git
cd vyos-build

Switch to correct branch (equuleus or sagitta):

git checkout sagitta

Copy your ISO to the build directory as build/live-image-amd64.hybrid.iso:

mkdir build
cp THE_PATH_TO_YOUR_ISO build/live-image-amd64.hybrid.iso

Change the THE_PATH_TO_YOUR_ISO to whatever location and name your ISO has.

Workaround

There is known issue with smoketest that it will fail if you have too many CPU cores/threads. The test is designed to use half of your cores, but it will fail if calculates more than 4, thus if you have 8 or more cores/threads then test likely will fail. If you do apply this patch to cap cores to 3:

sed -i 's~cpu /= 2~cpu = 3~' scripts/check-qemu-install

More cores don't increase speed, the test is single thread anyway, it usually uses <2 cores and thus 3 is more than enough. More cores will not speed up the test - it will only make the test fail due to OOM inside the test virtual machine.

Dependencies

Install dependencies:

apt install qemu-kvm python3-tomli python3-pexpect python3-git python3-jinja2 python3-psutil \
  sudo live-build pbuilder devscripts python3-pystache gdisk kpartx dosfstools

The tests

There are multiple tests executed via the make:

CLI configuration test:

This test aims to verify that commands in the configure mode have correct result after commit. For example - if some command configures routes, then the test checks if those routes are correctly propagated to the underlying system - in this example to the kernel/OS.

make testd

There is also make test that runs identical tests to the make testd and the difference is if the vyos-configd.service service is enabled or not. VyOS enables this service by default, that's why make testd is more accurate since it represents how VyOS runs in the wild.

Configuration file load test:

This test loads various boot.config like files and checks if commit doesn't fail.

make testc

RAID1 test:

This checks if the MDADM RAID1 installation works and if MDADM is able to resync after disk failure.

make testraid

If you encounter failures please rerun the test multiple times - there are known race conditions that can occur and this causes false-positives.

You can as well run smoketest directly from installed VyOS, but you need many network interfaces otherwise some tests will fail. The test is expecting 8 or more network ports. You do it by simply including vyos-1x-smoketest package in your ISO image build. Then you can boot and run vyos-smoketest. I'm not sure if all 8 are required but with few the test will fail for sure. Also make sure you have <= 4 cores/threads and 4GB or more of RAM. If you have more cores/threads then you need more RAM as well, try to keep it 1:1. Smoketest eats a lot of RAM and more so if you have more cores/threads.